Epson WorkForce Pro WP-4015 DN User manual

DO NOT INSTALL THE EPSON (OEM) INKS THAT WERE PROVIDED WITH THE PRINTER.
DO NOT POWER ON THE PRINTER BEFORE INSTALLING SAWGRASS SUBLIJET-E PRO INK CARTRIDGES.
POWER LOSS MAY CAUSE CARTRIDGE CHIP FAILURE. USE AN UNINTERRUPTIBLE POWER SUPPLY (UPS)
TO AVOID ACCIDENTAL POWER LOSS.
REMOVE CARTRIDGE BEFORE POWERING PRINTER OFF. FAILURE TO REMOVE CARTRIDGE PRIOR TO
POWERING OFF MAY RESULT IN CHIP FAILURE.
CARTRIDGE CHIP DOES NOT INDICATE DEPLETION. REPLACE CARTRIDGE ONCE THE LOW INK INDICA-
TOR LIGHT FLASHES
CAUTION
Epson WorkForce Pro WP-4015 DN
WinProle
INSTALLATION GUIDE
WIN OS
v20120713

SECTIONS:
Microsoft Windows Operating System Verication - Page 3
Epson Driver Download & Installation - Page 4
WinProle Installation & Registration - Page 10

Epson WorkForce Pro WP-4015 DN – Installation Guide
Microsoft Windows OS Verication
PAGE 3 of 15 >>
FIGURE 1
2
3
1
FIGURE 2
1
2
Before you begin, you will need to verify the Windows edition and system type you are using on your PC.
This is important when deciding which drivers to download.You should only download those drivers, which
are compatible with your operating system.
1.) To check the version of your operating system, rst click the Start icon in the bottom left corner of your
desktop. Then, right-click Computer. Finally, click Properties (see FIGURE 1).
2.) The following screen containing the Windows Edition and System Type should appear (see FIGURE 2).
The below example is running Windows 7 on a 64-bit OS. Please note your version number and remember
to only download those utilities which correspond with your version of Windows OS.

Epson WorkForce Pro WP-4015 DN – Installation Guide
Epson Driver Download & Installation
PAGE 4 of 15 >>
1.) Access the Epson website by entering http://www.epson.co.uk in the address eld of your web browser then
select the support section.
FIGURE 1
1
2
2.) Type 4015 into the search eld then select your printer model from the list (see FIGURE 2).
FIGURE 2
1
2
The following instructions will demonstrate how to install the Epson printer driver on computers running Windows
operating systems.
Note: Before installing the SubliJet-IQ 4015 WinProle, you will need to install the Epson printer driver.

Epson WorkForce Pro WP-4015 DN – Installation Guide
Epson Driver Download & Installation
PAGE 5 of 15 >>
3.) Ensure that the correct operating system is selected, click the Drivers & Software link to expand the
section. Click the Download to initiate the download (see FIGURE 3).
FIGURE 3
4.) Click the Download button to proceed (see FIGURE 4). The email address eld only needs to be
completed if you wish to recieve marketing emails from Epson.
FIGURE 4
1
2
1
3

Epson WorkForce Pro WP-4015 DN – Installation Guide
Epson Driver Download & Installation
PAGE 6 of 15 >>
5.) Select Desktop as your download destination and click Save (see FIGURE 5).
FIGURE 5 2
1
FIGURE 6
6.) Once the download has completed, double-click the executable icon to begin the installation process (see
FIGURE 6).

Epson WorkForce Pro WP-4015 DN – Installation Guide
Epson Driver Download & Installation
PAGE 7 of 15 >>
7.) Click the Run button (see FIGURE 7).
8.) Click the Setup button (see FIGURE 8).
FIGURE 7
FIGURE 8
FIGURE 9
9.) Highlight the icon that corresponds to your printer model and click OK (see FIGURE 9).

Epson WorkForce Pro WP-4015 DN – Installation Guide
Epson Driver Download & Installation
PAGE 8 of 15 >>
11.) Check Accept and click OK the license agreement to continue (see FIGURE 11).
10.) Select the appropriate language and click OK (see FIGURE 10).
FIGURE 10
FIGURE 11
2
1
2
1

Epson WorkForce Pro WP-4015 DN – Installation Guide
Epson Driver Download & Installation
PAGE 9 of 15 >>
FIGURE 12
Congratulations! The Epson printer driver installation is complete. Please proceed to the WinProle Installa-
tion & Registration section.
12.) Ensure that the pritner is powered on when you see the following window (see FIGURE 12).
13.) When the installation is complete you will see the following window, click OK (see FIGURE 13).
FIGURE 13

Epson WorkForce Pro WP4015 DN – Installation Guide
WinProle Installation & Registration
PAGE 10 of 15 >>
2.) You should now see the SubliJet-IQ_4015_v1.0.0.exe icon on
your desktop (see FIGURE 2). Double-click the icon to begin the
installation process.
FIGURE 1
2
3
1
4
FIGURE 2
1.) Download the WinProle by accessing the Sawgrass Europe website by entering
www.sawgrasseurope.com in the address eld of your web browser. Once there, navigate to:
Technical Support > SubliJet-IQ Technical Support > ICC Proles and click on the Epson
WorkForce Pro WP-4015 DN ICC Prole driver download link and save the le to your desktop: (see
FIGURE 1).
WinProle Installation
SubliJet-IQ_4015_v1.0.0.exe

Epson WorkForce Pro WP-4015 DN – Installation Guide
WinProle Installation & Registration
PAGE 11 of 15 >>
3) Ensure you are installing the correct driver and click Next (see FIGURE 3).
FIGURE 3
4.) If you agree with the terms of the License Agreement, click I Agree (see FIGURE 4).
FIGURE 4

Epson WorkForce Pro WP-4015 DN – Installation Guide
WinProle Installation & Registration
PAGE 12 of 15 >>
5.) Click Install if you would like to install the driver in the specied Destination Folder (see FIGURE 5).
FIGURE 5
6.) The following screen displaying the installation status should now appear (see FIGURE 6).
FIGURE 6

Epson WorkForce Pro WP-4015 DN – Installation Guide
WinProle Installation & Registration
PAGE 13 of 15 >>
8.) You will use the Product ID to register your product. The Product ID is located in the WinProle
Registration window (see FIGURE 12). The easiest and fastest way to obtain a Registration Code
24/7 is by clicking the Obtain Registration Code button, also located in the WinProle Registration
window. Follow the on-screen instructions to receive a Registration Code via an automatic E-mail.
Note: You must have a separate Registration Code for every machine on which the“WinProle” is
installed
7.) As installation nears completion, the following window will prompt you to register your product (see
FIGURE 11). DO NOT SKIP THIS STEP, registration is required to use the software. Click YES to
continue.
FIGURE 7
9.) The following instructions will show how to register On-line. Note the Product ID as this will be
needed during the registration process and click Obtain Registration Code (see FIGURE 8).
FIGURE 8
1
2

Epson WorkForce Pro WP-4015 DN – Installation Guide
WinProle Installation & Registration
PAGE 14 of 15 >>
10.) On the Product Registration web page, ll in the required information and click Submit when
complete (see FIGURE 9).Your Registration Code will now be sent to the e-mail address used
during registration.
FIGURE 9
11.) Enter the Registration Code you receive into the Registration Code text box and click Apply Code (see
FIGURE 10).
12
FIGURE 10

Epson WorkForce Pro WP-4015 DN – Installation Guide
WinProle Installation & Registration
PAGE 15 of 15 >>
13.) You should receive the following screen informing you that installation was completed successfully (see
FIGURE 12). Click Finish to complete the installation.
FIGURE 12
Congratulations! The SubliJet-IQ Epson WP-4015 WinProle installation is complete. Please proceed to the
Conguration Guide.
12.) You should receive the following screen conrming that registration was successful (see FIGURE 11).
Click OK to continue.
FIGURE 11