Equator 850 User manual

Built-In
3
5
15

Service would be provided from Monday to Friday between normal
business hours.
Installation
1. Non-removal of shipping rods, causing vibration / internal damage.
2. Non-adjustment of feet to level machine, causing vibration / internal damage.
3. Non-removal of exhaust vent plate at the back while using Venting Dry mode, causing
excess heat and resulting in damage to internal components.
4. Not conforming to minimum space requirements for Built-in installation, causing
excess heat and resulting in damage to internal components.
Maintenance
1. Non-cleaning of coin trap for debris, causing the unit to not drain out water and
resulting in drain pump malfunction.
2. Non-cleaning of vent fan & exhaust hose for lint, causing the unit to not dry properly.
Damage
1. Breakage of cosmetic parts eg. Door handle, knob.
2. Using of solvents to clean the machine or wash clothes causing damage.
3

850
26.5 x 23.5 x 21.5
52 lbs.
4
Temp Options Cool, Warm, Hot, Air Dry

The
28.5 inches
27.5 inches
27.5 inches
5

6

7

8

9

Determine dryer position on wall and mark required
bracket position. This dryer is not suitable to be
directly placed on top of a washing machine.
Instead use rear stacking kit or dryer stack rack.
* A minimum 50mm is needed between the top of the
dryer and the ceiling for ease of installation.
* If mounting above a washing machine, allow
sufficient room to open the lid of the washer.
10