Eques VEIU Pro User manual

Smart and Safe
User Manual
VEIU Pro
Smart Video Doorbell

01 | Package Contents
Outdoor Camera 1 piece
Indoor LCD Screen 1 piece
Charger 1 piece
Bracket 1 piece
Bolts 6 pieces
USB Cable 1 piece
OPEN
Bracket Outdoor Camera Indoor LCD Screen
Charger USB Cable Bolts
1 piece 1 piece 1 piece
1 piece 1 piece 6 pieces

02 | Component Diagram
DoorbellMIC
Camera Speaker
Camera
PIR motion detector
Outdoor Camera
Indoor LCD Screen
Screen
Main key
Reset USB port SD slotMIC
Distance Sensor
30 PIN I/O connector

03 | Installation Diagram
Tips:
Install Device with 1 screwdriver within 5minutes
1.When fastening the outdoor camera, attach bolts into its
poles first.
2.When fastening the LCD screen, align it to the notch of
the bracket.
Indoor LCD Screen
Preview Key
Camera
Camera
Door
Peephole
Ribbon cable
Bolts
Bracket
Self-adhesive strips

1. Attach two bolts to the
camera loosely.
2. Peel off the protective film
from the adhesive strips.
3. Pass the ribbon cable
through the door hole.
Tip: It will be easier to wrap
the ribbon cable in a paper
tube first then pass through.
4. Fasten the camera by
pressing it firmly onto the door.
04 | Installation

5.Take out the screen, push
out the small bracket on the
back of it with your finger.
6. And then take off the
guard board in the botton of
the bracket.
7. Slightly press the cable to
the pin on the bottom of the
large bracket.
8. And then attach the guard
board.

9. Pass the bolts through the
bracket as pictured, then
tighten the screws.
10. Put on the small bracket
with your finger.
11. Suspend the LCD monitor
on the bracket from top to
bottom, its magnet will be
attached automatically.
12. Press the Power key for 5
seconds to turn on/off your
doorbell.
②
①

05 | Register and Add Your Device
Scan QR code to download the app, or seach
“Eques” on App store/Google play.
5.1 | Download App
5.2 | Start App
After installing the app, click to start it.
IOS Android

5.3 | Register, Login and Add Devices
Fill the information as pictured
then click “register”. After
completed, use this account to
login. Make sure you remember
your login info.
In the “Device Manager” panel,
click “+”to add a new device.
Choose the device above as
pictured.

5.4 | Input WiFi Information, Scan QR Code
Input WiFi name and password
as per UI prompt then click
“Start Binding”. (Notes: the UI
will prompt to enter the menu
of searching QR code.)
Click “Prepare Scan” on the
previous step then generate a
QR code, use the outdoor
camera to scan this code.
If you don’t know how to scan,
you can click “Have a problem
scanning QR Code?” on the
previous step.
SAMPLE

You can hold your smartphone
in landscape orientation for a
full view.
5.5 | Bind Device and Preview
1.Turn on power key and go
to setting
2.Click “Setting” choose
“Scan QR code”

06 | Applicable Door Thickness
Outdoor Indoor Side angle
Applicable door thickness: 1.4in - 4.3in (35mm ~ 110 mm)
Applicable peephole: 0.6in - 2.2in (15mm ~ 50mm)
When choosing bolts to install the outdoor camera, you must
know your door’s thickness.
Notes:
For the door thickness between 1.4in - 2.6in (35mm ~ 65mm),
choose 30mm short bolts;
For the door thickness between 2.6in - 3.7in (65mm ~ 95mm),
choose 55mm long bolts;
For the door thickness above 3.7in (95mm), choose 80mm long
bolts.

07 | Safety Guideline
Make sure you use the charger that is included in
the package. Unqualified chargers might cause
damage to the device.
Try to avoid placing the device in high-temperature,
high humidity, dusty or other harsh environments as
this may reduce its lifespan.
Don’t forcibly squeeze the camera lens and the
black ball on the top of the outdoor subcomponent;
otherwise it can cause hardware damage.
Treat the ribbon cable with care during installation,
don’t forcibly drag, scrape or cut the ribbon cable.
(The device will be out of warranty if it is damaged
by inappropriate installation.)
Pls take off the display slightly from bottom to
top when you need to charge it.

CONTACT PAGE
CUSTOMER SERVICE EMAIL:
[email protected]
WEBSITE:
www.equeshome.com
ADDRESS:
3000 El Camino Real,Building 4,
Suite 200,Palo Alto,CA 94306, USA