Equip 332712v2 User manual

Ⅰ
ⅠⅠ
Ⅰ. INTRODUCTION
equip 2-port HDMI splitter distributes 1x HDMI source to 2x HDMI displays simultaneously. It
offers HD video solution for super market, shopping mall, data control center, information
distribution, conference room presentation, education and training, corporation show room,
home theater etc.
Ⅱ
ⅡⅡ
Ⅱ. SPECIFICATIONS
Input Video Signal 0.5 -1.0 volts p-p
Input DDC Signal 5 volts p-p (TTL)
Max Single Link
Range 1920X1080, 1080P
Output Video HDMI 1.3 + HDCP1.0/1.1/1.2
Resolutions
DTV/HDTV 480p/576i/576p/720p/1080i/1080P
HDMI Version HDMI 1.3
Operating
Frequency Up to 225MHz
EIDI Duration 4 seconds
Power supply DC 5V/1A
Ⅲ
ⅢⅢ
Ⅲ. CONNECTION
a) Connect the input source and output displays to the HDMI Splitter.
*Please refer to IV. INTERFACE
b) Connect the DC 5V power supply to the splitter. Please note that power supply with higher
voltage may damage the splitter.
c) When input source and output displays are connected and turned on, the
corresponding LED will light.
Attention: In order to protect the splitter and your devices, make sure the splitter is powered
off before attaching HDMI source and displays.
*plug and un-plug the HDMI cables gently is suggested.

Ⅳ
ⅣⅣ
Ⅳ. INTERFACE
①
Power LED
③
HDMI Input
⑤
HDMI Output 1
⑦
LED of HDMI Output 2
V. PACKAGE CONTENTS
Item
2-
port HDMI Splitter
Power Adapter
User Manual
Ⅵ
ⅥⅥ
Ⅵ. FAQ
a)
The splitter doesn’t appear to be functioning.
Make sure all cables are in good condition and well connected.
If the power supply is in good condition and well connected, check if the LED light is on.
*The maximum support length of HDMI cable
on the market, it is recommended to use equip cables for the
Power LED
②Power Socket
HDMI Input
④LED of HDMI Input
HDMI Output 1
⑥LED of HDMI Output 1
LED of HDMI Output 2
⑧HDMI Output 2
V. PACKAGE CONTENTS
Qty Remark
port HDMI Splitter
1x
Power Adapter
1x DC5V/1A
User Manual
1x English
The splitter doesn’t appear to be functioning.
Make sure all cables are in good condition and well connected.
If the power supply is in good condition and well connected, check if the LED light is on.
*The maximum support length of HDMI cable
is up to 10 meters. Due to different quality cables
on the market, it is recommended to use equip cables for the
best quality of image
If the power supply is in good condition and well connected, check if the LED light is on.
is up to 10 meters. Due to different quality cables
best quality of image
.

equip HDMI Cables
1m – equip 119341
2m – equip 119342
3m – equip 119343
http://www.equip-info.net/HDMI-Cable/119341/p-739.htm
5m – equip 119345
7.5m – equip 119348
10m – equip 119349
http://www.equip-info.net/HDMI-Cable/119345/p-589.htm
@ Copyright Digital Data Communications GmbH. All rights reserved.
Zech-Norm Str.25, 44319 Dortmund, Germany
www.equip-info.net