SMART GoWire SB800 User manual
SB800, SB800i4, SB800i5, SB800ix..............2
SB600, SB600i4, SB600i5, SB600ix..............3
SBID8070i, SBID8055i ................................... 4
SBID8070i-G4, SBID8084i-G4 ....................... 5
SB69wi............................................................6
SP518, SP524................................................. 6
SMART GoWire™ (GW-MPPE) auto-launch cable
SB800,SB800i4,SB800i5,SB800ix.............. 2
SB600,SB600i4,SB600i5,SB600ix.............. 3
SBID8070i,SBID8055i...................................4
SBID8070i-G4,SBID8084i-G4.......................5
SB69wi............................................................6
SP518,SP524.................................................6
SMARTGoWire™(GW-MPPE) auto-launch cable
SB800, SB800i4, SB800i5, SB800ix, SB800ix2...........2
SB600, SB600i4, SB600i5, SB600ix, SB600ix2...........3
SBID8070i, SBID8055i ..................................................4
SBID8070i-G4, SBID8084i-G4 ......................................5
SB60wi...........................................................................6
SP518, SP524................................................................6
SMART GoWire™ (GW-MPPE) auto-launch cable
1015702 Rev A1 5
SBID - G4
VGA In
Audio 1 In
Audio Out
DVI-D InHDMI1 In DVI-D Out
3
HDMI 2 In
Output/Pass Through
6SHDNHU2XWȍ
Audio 3 In
Audio 2 In
InputPbPr
Y
Composite
Video
DP In Service/Media
Room Control
+
-
+
-
smarttech.com/kb/170446
SBD8084i-G4
Cb/Pb
Composite
Video Cr/Pr
DP In DVI-D In
Audio 1
In Audio 2
In Audio 3
In Audio
Out
S-Video In
Y
VGA1 In
VGA2 In VGA Out
HDMI1 HDMI2
Input
Output / Pass Through
Room Control
50/60Hz, MAX 2A
AC-OUT 100-240V~ 100-240V~, 50/60Hz
AC-IN
6SHDNHU2XWȍ
+
-
+
-
Internal
Speaker
External
Speaker
smarttech.com/kb/170446
SBID8070i-G4
1015702 Rev A1 7
© 2013 SMART Technologies ULC. All rights reserved. SMART Board, smarttech and the SMART
logo are trademarks or registered trademarks of SMART Technologoes ULC in the U.S. and/or
other countries. All third-party products and company names may be trademarks of their respective
owners. Contents are subject to change without notice. This product and/or use thereof covered
by one or more of the following U.S. patents; smarttech.com/patents. Other patents pending.
06/2013. 1015702 Rev A1
*1015702*
smarttech.com/support
smarttech.com/contactsupport
Hardware environmental compliance
SMART Technologies supports global efforts to ensure that electronic equipment is manufactured,
sold and disposed of in a safe and environmentally friendly manner.
Waste Electrical and Electronic Equipment and Battery regulations
(WEEE and Battery Directives)
Electrical and electronic equipment and batteries contain substances that can be harmful
to the environment and to human health.The crossed-out wheeled bin symbol indicates
that products should be disposed of in the appropriate recycling stream and not as regular waste.
See smarttech.com/compliance for more information.
FCC Notice
This equipment has been tested and found to comply with the limits for a Class Adigital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commer-
cial environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful interfer-
ence to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own
expense.
© 2013 SMART Technologies ULC. All rights reserved. SMART Board, smarttech and the SMART
logo are trademarks or registered trademarks of SMART Technologoes ULC in the U.S. and/or
other countries. All third-party products and company names may be trademarks of their respective
owners. Contents are subject to change without notice. This product and/or use thereof covered
by one or more of the following U.S. patents; smarttech.com/patents. Other patents pending.
06/2013. 1015702 Rev A1
*1015702*
smarttech.com/support
smarttech.com/contactsupport
Hardware environmental compliance
SMART Technologies supports global efforts to ensure that electronic equipment is manufactured,
sold and disposed of in a safe and environmentally friendly manner.
Waste Electrical and Electronic Equipment and Battery regulations
(WEEE and Battery Directives)
Electrical and electronic equipment and batteries contain substances that can be harmful
to the environment and to human health.The crossed-out wheeled bin symbol indicates
that products should be disposed of in the appropriate recycling stream and not as regular waste.
See smarttech.com/compliance for more information.
FCC Notice
This equipment has been tested and found to comply with the limits for a Class Adigital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commer-
cial environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful interfer-
ence to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own
expense.
This manual suits for next models
16
Table of contents
Other SMART Cables And Connectors manuals
