ERARD Doohbox User manual

This user manual is subject to modifications and we therefore ask you to fill in and return the
receipt below.
This receipt giving your name and address will enable us to forward modifications to you as soon
as they are issue



Tel (info)
04
-
72
-
4
-
91
-
0
User Manua
l
Doohbox
User Manual
Company name and address:
Holder's name:
Date :
Signature :

ERARD
ERARDGROUP
Contents
1. Introduction.................................................................................................................................... 3
2. Description of the Doohbox ........................................................................................................... 3
3. Precautions ..................................................................................................................................... 4
4. First use .......................................................................................................................................... 5
5. Technical characteristics ................................................................................................................
. Cleaning ..........................................................................................................................................
7. Maintenance .................................................................................................................................. 7
8. Recycling ......................................................................................................................................... 7
9. Guarantee conditions ..................................................................................................................... 8
10. EC certificate ................................................................................................................................ 9

ERARD
ERARDGROUP
1. Introduction
The information in this manual may vary depending on your Doohbox model.
2. Description of the Doohbox
The Doohbox is a product in which the client installs a flat screen. It ensures the visibility of a
dynamic display and protects the screen from any thermal malfunction caused by the
temperature outside the housing.
The main protection parameters for a dynamic display regardless of outside conditions are as
follows:
-Stable temperature regardless of the outside temperature (in the operating range of the
specified product)
-Air renewal in the screen faceplate
-Absence of vibration
Doohbox protects flat screens during operation for interior and exterior applications. The operating
temperature range recommended by flat screen manufacturers is 5-40°C.
IMPORTANT: The maximum power input for a display screen installed in the enclosure is 400W.
The product consists of two non-adjustable compartments (hot and cold chamber). It includes two
locks to ensure security and theft-resistance of the housing. It is intended exclusively for professional
installations. The Doohbox can be used in the following application areas:
-Shelter, workshop, underground, train, stand, dental examination room, operating block,
etc.
Note: The housing is CE, IP 54 & IK09 certified.

ERARD
ERARDGROUP
3. Precautions
Important:
Before switching the equipment on, make sure the line it is connected to is fitted with a circuit
breaker to protect the screen, installer and user.
Carefully follow the installation instructions in the User's Manual and take any necessary
precautions to avoid injury and damage to the equipment.
Observe t e following rules during use:
Opening the housing is assisted (landscape versions) by two gas cylinders on either side.
- The opening movement of the gate must not be impeded in any way.
- For product handling, the enclosure must always be moved without a load (screen).
- Do not attach yourself to the electrical enclosure.
- Keep the Doohbox away from strong electromagnetic fields to protect the enclosed screen.
The electrical wiring is only accessible from inside the housing, which is fitted with two locks. Only the
housing key can unlock the electrical enclosure. The housing has two PG1 cable glands that can
accommodate a power source and a network connector depending on the installation.
The housing must not be subjected to outside temperatures above 45°C (113 F) in the shade or below -
15°C (5 F). To allow better viewing of the screen, the housing should not be exposed to direct sunlight.
Warning:
- Do not obstruct the vents in the enclosure or in the embedding structure.
- Mechanical devices or other means not specifically recommended by the manufacturer
must not be used to accelerate defrosting.
- Do not use electrical devices inside the compartment unless they are of the type
recommended by the manufacturer.
- Do not damage the cooling system.
- To avoid any instability, the device must be fastened according to the instructions.

ERARD
ERARDGROUP
4. First use
The housing is fitted only with an internal circuit breaker to ensure the safety of the electrical
equipment.
Follow the housing installation instructions and attach the screen in the electrical enclosure. Then
follow the instructions below:
1. Unlock the housing with the keys provided.
2. Open the gate from bottom to top for the landscape version, and from right to left for the
portrait version.
BE CAREFUL when opening the gate!
3. Once the screen is installed on the housing, it can be connected to the modular outlet (see
wiring diagram) on the housing's electrical terminal strip.
4. The device can then be connected to the mains power supply.
5. The housing can then be activated by switching the circuit breaker installed in the upper left
part to "ON".
. Switch on the screen and its electrical equipment.
7. Close and lock the gate.
Circuit breaker
Modular outlet

ERARD
ERARDGROUP
5. Technical characteristics
Component name
Functions
Tec nical c aracteristics
Doohbox
230 VA
C
–
50Hz
Circuit breaker
Interrupts the current in the event of
overload or short-circuit in the
installation
230V
-
50/ 0Hz
Contactor
Transmits a request between the
control and power parts
230V
-
50/ 0Hz
Thermostat
Controls the inside temperature of
the h
ousing
(NO/NC
-
5/10)
Electrical
terminal strip
Connects the electrical components
(800V/2.5 mm²)
Modular outlet
Suppl
ies
power to the screen
2P + E on DIN rail (220
-
80x80 fans
Ventilate
s
the screen faceplate
220
-
240V Vac
/ 0Hz/209mA
120x120 fans
V
entilate
s
the cooling unit
220
-
240V Vac
Heating film
Heat
s
the inside of the housing
230V
-
150W
Cooling unit
Cool
s
the inside of the housing
220
-
240V /50Hz /350W,
Coolant: R 134a, coolant
mass: 900g max
Note:
All accessible metal parts
in con
tact with an electrical component are earthed.
An
earthing terminal strip for all wires is mounted in the upper rear part of the device.
6. Cleanin
Use glass cleaner to clean the glass and a dry cloth to clean the other parts of the
housing.
Only the outside surface of the product should be cleaned. Unauthorized persons
must not, under any circumstances, unlock the housing to clean the glass from the
inside.

ERARD
ERARDGROUP
7. Maintenance
For your safety, never open the enclosure without having first disconnected the mains
power supply cord.
In case of malfunction:
- Check connection to mains power outlet.
- Check all connections.
- If the problem persists or for any other questions, contact our after-sales department (see cover
page of this manual for contact information).
IMPORTANT: Before closing or opening the gate, it is very important to check the condition and
proper placement of the seal. In case of deterioration, the seal must be maintained or replaced
according to instructions in the relevant manual. When closing the gate, the water discharge gutter
should be correctly cleaned.
If an electrical component in the housing fails, only a qualified person appointed by Erard Pro is
authorized to work on the device. A maintenance manual is provided for replacing wear components
inside the product.
The housing is covered by a 5-year guarantee for the mechanical part (excluding wear components
and labour), and by a 1-year guarantee for the electrical part. Regular yearly maintenance is strongly
recommended. If the device is opened by a non-professional, the guarantee will be immediately
invalidated.
8. Recyclin
Electrical and electronic waste
The device must be correctly recycled at the end of its service life. Do not litter. Do not
burn. Certain hazardous substances in the electrical and electronic equipment may be
harmful for the environment or human health. This device must be disposed of in a special waste
treatment centre. Consult local authorities for more information.
Ot er materials (metal, plastic)
Dispose of metal parts in a scrap metal container. Dispose of plastics in the corresponding container.

ERARD
ERARDGROUP
9. Guarantee conditions
The Doohbox has undergone all the required tests and fulfils all the applicable safety
requirements. If, however, manufacturing or material defects are found, Erard Pro will
cover repair of the product (parts and labour). If the product cannot be repaired, Erard
Pro will exchange it or the defective component during a 5-year period for mechanical
parts (excluding wear parts) and during a 1-year period for electrical parts, including: fans,
compressor, condenser, evaporator, heating resistor, thermostats, and contactor. The original
invoice indicating the purchase date, reseller name and product serial number must be provided to
activate the guarantee.
T is guarantee does not cover t e following cases:
- Damage due to an external cause such as lightening, dropping the product, water, fire, etc.
- Transport costs, as well as any damage sustained during transport, related to the execution
of this guarantee.
- Damage caused by negligence, storage, faulty installation, abnormal usage contrary to or
non-compliant with the recommendations in this manual, modifications, repairs carried out
by persons not authorized by Erard Pro, etc.

10. EC certificate