ERBESSD INSTRUMENTS WiSER 3x Mini User manual

INSTALLATION
MANUAL
EI-WiSER™ 3x Mini
DIGITAL
MANUAL

In this manual you will learn everything you need to start using your
wireless triaxial accelerometer WiSER™ 3X Mini.
The WiSER™ 3X Mini is one of our most versatile triaxial sensors. This
sensor can only be used through the WiSER™ VIBE PRO app and will allow
you to make routes from your machines with great ease.
Thank you for purchasing
WISER 3X Mini!
Sensor parts
1.1 Magnetic mounting
1 2 3
Power button Base screws, size:
1.5mm Allen
Fastener, size: 1/4 -28UNF
Axes direction
To turn on, press the
button. It will start
flashing.
To turn off, press the
button until the light
turns off.
1. MOUNTING

1 2
3 4
3 4 5
5
Parts Assembly steps
Machine contact base
Adjustable base screw
Position coin
Machine contact base
Parts Assembly steps
1.2 Precision mounting
1.3 Simple Mounting
*We recommend using epoxy glue
6 7 8
1Add glue* as shown in the image
*We recommend using epoxy glue
2
Positioning wrench
Fastener
Add glue* as shown in the image

2. INSTALLATION ON MACHINE
To achieve a correct vibration analysis, it
is crucial to know how the sensor is
placed on the machine.
The WiSER™ 3X Mini has the orientation
of its axes engraved on the top face,
locate the axes of your machine and
place the WiSER™ 3X Mini in the
direction of interest.
Sensor
WiSER™ 3x Mini
Cenital View
Side View
3. INCORRECT PLACEMENT
Front view
XX
Warning: If the direction of the
accelerometers does not align
with the machine axes, the
vibration amplitudes may be
incorrect.

1 2
4
Select the off-route
analysis button
3Oprima los 3 puntos
que se encuentran en la
esquina superior izquierda
Select
“Connection Manager”
The WiSER™3X Mini sensor captures data exclusively through the WiSER™
VIBE PRO app. To do so, follow the steps below:
4. USE WITH WISER™ VIBE PRO
3
!
Select the 3 dots in
the upper right corner
Turn on the
WiSER™3X Mini

56
7
Select the “Phantom”
section and then
“Scan Bluetooth sensors”
Press the “Record” button
to obtain the vibration data
of your machine
Download WiSER™ VIBE PRO
4. USE WITH WISER™ VIBE PRO
Locate the WiSER™ 3X
Mini and select the “>>”
button. You will see
the “Connected to sensor”
notification

1 2 3
4 5 6
Remove
the screws
Remove the enclosure,
carefully to avoid
damaging
the cable
Slide the battery
out of the plate
Insert the new
battery into the plate,
positive with positive
Verify that the screw
holes in the enclosure
matches the holes in the
base
Reinsert the screws
and secure the enclosure
5. BATTERY REPLACEMENT
6. CERTIFICATIONS
Batería
Batería

[e-mail] | www.erbessd-instruments.com
For more information contact us:
CHECK OUR TERMS, CONDITIONS AND SHIPPING POLICIES IN THE
FOLLOWING LINK: bit.ly/3AV1Yawf
ALL THE IMAGES ARE FOR ILLUSTRATIVE PURPOSES ONLY. THE
FINAL PRODUCT MAY VARY DEPENDING ON THE VERSION AND/OR
THE CHANGES OR UPGRADES MADE TO THE PARTS AND COMPO-
NENTS OF THE DEVICES
© 2018 DIGITAL VIBRATIONS S. DE R.L. DE C.V
WM-GR2021.1018.01
ErbessdInstrumentsOfficial | Erbessd-Instruments
[phone] | [phone]