ErGear EGCM1 User manual

English ------------------------ 01-07
Deutsch ------------------------ 08-14
Français ------------------------ 15-21
Español ------------------------ 22-28
Italiano ------------------------ 29-35
日本語 ------------------------ 36-42
1
Thank you for choosing this Ergear product! At Ergear we strive to provide
you with the best quality products and services in the industry. Should you
have any issues, please don't hesitate to contact us at
[email protected].(US/CA/DE/UK/FR/IT/ES/AU)
メール:[email protected]
Model:EGCM1
Monitor Table
Stand Instruction Manual

•Carefully open the carton, remove contents and lay out on cardboard or other
protective surface to avoid damage.
•Check package contents against the Supplied Parts and Hardware List to assure that
all components were received undamaged. Do not use damaged or defective parts.
•Not all parts and hardware included will be used. lf you require replacement parts,
contact customer service at [email protected]
•Carefully read all instructions before attempting installation.
•If you do not understand the instructions or have any concerns or questions, please
contact customer service at [email protected]
•This product may contain moving parts. Use with caution.
•Do not use this product for any purpose or in any configuration not explicitly specified
in this instruction. We hereby disclaim any liability for injury or damage arising from
incorrect assembly, incorrect mounting, or incorrect use of this product.
UNPACKING INSTRUCTIONS AND IMPORTANT SAFETY INFORMATION
Supplied Parts and Hardware
M4x12mm
M-A X8 M4x16mm M-B X8 M5x12mm M-C X8 M5x16mm
M-D X8 D5
M-E X8 M-F X8
X1
04
X2
05 X1 06 X4 07 X1 08
X1
01
C x2
M3x8mm
D x2
5/32 in.(4mm)
F x1
15/64 in.(6mm)
E x1
03
X1 X1
02
M8x10mm
A x2
M6x10mm
B x3
01

STEP 1A For C Clamp Mounting
BE
02
02
01
A
F
＜45mm(1 49/64 in.)
45mm(1 49/64 in.)
-
80mm(3 5/32 in.)
03
STEP 1A-1 Install part [02] to pole [01]
STEP 1A-2
Secure the mount to the
desktop
Adjust the mount according to the thickness of desktop
STEP 1A-3 STEP 1A-4
Install part [03] to part [02]
15/64 in.(6mm)
F15/64 in.(6mm)
5/32 in.(4mm)
02

Secure monitor connector
[04] to the pole [01] then
attach the cable clips [07] to
the monitor connector [04]
STEP 2-2
Slide the cable clip [06] and
monitor connector [04] to the
pole [01]
STEP 2-1
STEP 2 Install Cable Clips [06] [07] & Monitor Connector [04] to Pole [01]
STEP 1B For Grommet Mounting
03 08
01
a
a
F
07
04
01
06
Remove part [a] from part
[03]
STEP 1B-1 Secure the mount to
desktop
STEP 1B-2
15/64 in.(6mm)
03

STEP 3 Check Monitor Hole Pattern and Select Monitor Bolts
MAX:100
mm/4 in.
MAX:100
mm/4 in.
M5M4
Only one size fits your TV.
100 mm ≈ 7 7/8 in.
75 mm ≈ 4 in.
M-A/M-C
M-E
05
M-B/M-D
M-E
M-F
FLAT BACK MONITOR
(UNIVERSAL MONITOR PLATE)
ROUND BACK MONITOR
(UNIVERSAL MONITOR PLATE)
STEP 4 Attach the Monitor Plates [05] to the Monitors
Bolt length:Verify adequate thread engagement with bolts or bolts/spacers
combination. We recommend thread engagement by at least 5 turns.
-Too short will not hold the monitor.
-Too long will damage the monitor.
Too Short Too Long Correct Correct
04

Hang Monitors to the Stand and Secure with Knob [C] and
Bolts [D]
STEP 5
STEP 6 Fix Tilt Angle of the Monitors
F
C
D
15/64 in.(6mm)
05

STEP 7 Manage Cables
STEP 8 Store Allen Keys into the Cable Clip
F 15/64 in.(6mm)
E 5/32 in.(4mm)
06

Features
180°
Tilt
Individual VESA plate height adjustment
helps monitors to be perfectly aligned.
Tilt
360° 360°
07

Thank you again for
choosing this Ergear product!
All of us at Ergear do appreciate your product purchase. We hope that
you are as happy with your product as we are designing and
manufacturing it for you. We strive to provide you with the best quality
products and services in the industry. Should you have any issues,
please don't hesitate to contact us at
[email protected] (US/CA/DE/UK/FR/IT/ES/AU)