Southern Enterprises Orion MS9941 User manual

Page 1
Assembly Instructions
PO#
TV/Media Stand
Antique Gray Finish for Body
Black Finish for Base

1 Quantity
Of 1
bottom panel
2 Quantity
Of 4
support foot
3 Quantity
Of 1
middle support foot
4 Quantity
Of 1
left middle panel
5 Quantity
Of 1
right middle panel
6 Quantity
Of 1
lower fixed shelf
7 Quantity
Of 1
upper fixed shelf
8 Quantity
Of 1
left side panel
9 Quantity
Of 1
right side panel
10 Quantity
Of 1
top panel
11 Quantity
Of 2
fixed bar
12 Quantity
Of 1
left door
13 Quantity
Of 1
right door
14 Quantity
Of 1
upper back panel
15 Quantity
Of 1
lower back panel
16 Quantity
Of 2
adjustable shelf
17 Quantity
Of 1
drawer face panel
18 Quantity
Of 1
drawer left side panel
19 Quantity
Of 1
drawer right side panel
20 Quantity
Of 1
drawer back panel
Page 2
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded
surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing.
Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures.
Using the incorrect hardware will cause damage.
TV/Media Stand
Parts List

21 Quantity
Of 1
drawer bottom panel
A Quantity
Of 24
wood dowel
B Quantity
Of 24
cam bolt
C Quantity
Of 24
cam lock
D Quantity
Of 16
sticker cover
E Quantity
Of 4
bolt Dia: 1/4” x 1-3/4”
F Quantity
Of 4
washer
G Quantity
Of 26
screw for back
H Quantity
Of 8
nut
I Quantity
Of 8
bolt for drawer
Quantity
Of 8
shelf holder
K Quantity
Of 4
hinge
L Quantity
Of 24
screw for hinge
M Quantity
Of 2
door knob
N Quantity
Of 1
drawer knob
O Quantity
Of 5
bolt for knob
P Quantity
Of 1
allen wrench
Q Quantity
Of 4
screw
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
Page 3
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded
surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing.
Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures.
Using the incorrect hardware will cause damage.
TV/Media Stand
Parts List

Page 4
Figure 1
Insert 4 pcs bolts (E) through 4pcs flat
washers (F) to connect support feet (2) to
bottom panel (1).
Tighten bolts (E) with phillips screwdriver.
Tighten middle support foot (3) into the bottom
panel (1).
Figure 2
Insert 8 pcs cam locks (C) into holes on fixed
shelf (6) and fixed shelf (7). Screw 8 pcs cam
bolts (B) into holes on left middle panel (4) and
right middle panel (5). Attach left middle panel
(4) and right middle panel (5) to fixed shelf
panel (6) and (7) by inserting wood dowels (A)
and cam bolts (B) into corresponding holes
until all panels meet.
Tighten by rotating cam locks (C) clockwise
with phillips screwdriver.
.
F
F
(2)
(2)
(2)
(2)
(1)
(3)
E
E
E
F
P
A
(7)
(6)
(4)
(5)
A
A
C
A
A
A
B
B
B
B
B
B
B
C
C C
C
P
TV/Media Stand
Assembly Instructions

Page 5
Figure 3
Insert 8 pcs cam locks (C) into holes on
assembled unit and bottom panel (1). Screw 8
pcs cam bolts (B) into holes on bottom panel
(1) and two side panels (8) and (9). Attach
assembled unit to bottom panel (1) by inserting
wood dowels (A) and cam bolts (B) into
corresponding holes until assembled unit and
bottom panel (1) meet.
Attach left side panel (8) and right side panel
(9) to assembled unit by inserting wood dowels
(A) and cam bolts (B) into corresponding holes
until side panels (8), (9), and assembled unit
meet.
Tighten by rotating cam locks (C) clockwise
with phillips screwdriver.
Cover cam lock holes with sticker covers (D).
Figure 4
Use screws (Q) to connect fixed bar (11) to top
panel (10).
Tighten screws (Q) with phillips screwdriver.
B
C
(4)
(7)
(5)
(6)
(1)
(8)
(9)
A
A
B
B
C
D
A
A
A
A
B
B
B
B
C
D
C
D
C
D
D
(10)
(11)
(11)
Q
Q
TV/Media Stand
Assembly Instructions

Page 6
Figure 5
Insert 8 pcs cam locks (C) into holes on
assembled unit. Screw 8 pcs cam bolts (B) into
holes on top panel (10). Attach top panel (10) to
assembled unit by inserting wood dowels (A)
and cam bolts (B) into corresponding holes until
to panel (10) and assembled unit
meet.
Tighten by rotating cam locks (C) clockwise
with allen wrench (P).
Cover cam lock holes with sticker covers (D).
Figure 6
Insert upper back panel (14) and lower back
panel (15) into grooves in the back of
assembled unit.
Tighten screws (G) with phillips screwdriver.
(10)
G
(9)
(8)
(4)
(5)
(1)
(14)
(15)
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
(4)
D
D
(10)
(8)
(5)
(9)
B
B
B
B
B
B
B
A
A
A
A
A
A
A
C
C
C
C
C
C
C
D
D
D
TV/Media Stand
Assembly Instructions

Page 7
Figure 6
Use screws (L) to connect hinges (K) to doors
(12) and (13). Tighten screws (L) with phillips
screwdriver.
Use bolts (O) to connect knob (M) to doors (12)
and (13). Tighten bolts (O) with phillips
screwdriver.
You may need to adjust the door by tightening
or loosening the two screws on the hinge.
Figure 7
Use screws (L) to connect left door (12) and right
door (13) to left side panel (8) and right side
panel (9). Tighten screws (L) with phillips
screwdriver.
Insert shelf holders (J) into desired holes of
middle panels (4) (5) and side panel (8) and (9).
Then place middle adjustable shelf (16) onto the
shelf holders (J).
H
L
L
L
K
(8)
(9)
(12)
(13)
(16)
(16)
L
L
J
J
K
K
(12)
(13)
L
K
K
L
L
L
L
K
K
L
L
O
O
M
M
O
O
L
Screw for adjusting the door
TV/Media Stand
Assembly Instructions

Page 8
Insert nuts (H) into holes on drawer face panel
(17).
Attach drawer side panels (18) and (19) to
drawer face panel (17) with bolts (I). Tighten bolt
s
(I) with phillips screwdriver.
Insert the drawer bottom panel (21) into inner
grooves of drawer side panel (18), (19) and
drawer face panel (17).
Insert nut (H) into holes on drawer back panel
(20), then attach drawer back panel (20) to ends
of drawer side panels (18) and (19). Tighten bolts
for drawer (I) with phillips screwdriver.
Use bolt (O) to connect knob (N) to drawer
face panel (17). Tighten bolt (O) with phillips
screwdriver.
Insert drawer into assembled unit as shown in
figure 9.
Now your new TV/Media stand is ready to use.
I
I
I
I
I
I
I
I
H
H
H
H
H
O
H
H
H
N
(17
(18
(19
(20
(21
TV/Media Stand
Assembly Instructions

Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form

CAUTION
The top shelf is intended for a flat screen television with a maximum overall width of 58” and supports up to
175 lb.
The top shelf is NOT INTENDED for tube televisions.
Each shelf should not be loaded with more than 20 lb. Each drawer box should not be loaded with more than
10 lb.
DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the
maximum size and weight indicated may result in instability causing possible injury.
This unit contains a permanent warning sticker located on under side of top shelf or inside drawer.
Do not allow children under 16 years to move the cart.