Ergonomic Accessories BodyFit Series Guide

BodyFit Series Chairs: Adjustment Guide
Synchro Mechanism Function
Left side knob
Roll knob forward: unlocks the mechanism and puts the chair into full free float mode
Roll knob backward: lock the mechanism into a set position
Left side lever
Lift lever: release the seat slider mechanism, use forward or backward momentum of
hips to adjust as required to achieve ideal seat depth.
Release lever: locks seat into desired seat depth setting
Right side knob
Roll knob forward: increases the mechanism tilt tension to accommodate heavier
individuals, ideal setting allows a user to "float" while the mechanism is unlocked with
very little pressure required to move through the full range of motion of the chair

Roll knob backward: decreases the mechanism tilt tension to accommodate lighter
individuals
Right side lever
Lift lever while seated (loaded): adjusts the seat height upward
Lift lever with weight removed (unloaded): adjusts the seat height downward
Release lever: locks seat into desired seat height setting
Backrest height adjustment
Lift entire backrest upward to highest position: allows backrest to drop back to the
lowest setting
Lift entire backrest upward slowly in a controlled manner from lowest setting: allows
backrest to be set at any one of the 5 height settings (4 clicks), each click indicates a .5"
higher setting. Adjust to highest position to reset at the lowest setting once again.
Armrest height adjustment

Lift entire armrest upward to highest position: allows armrest to drop back to the lowest
setting
Lift entire armrest upward slowly in a controlled manner from lowest setting: allows
armrest to be set at any one of the 10 height settings (9 clicks), each click indicates a
.5" higher setting (total range = 4.5"). Adjust to highest position to reset at the lowest
setting once again.
Armpad fore/aft adjustment
Push forward from the rear of the armpad: allows armpad to adjust forward to be set at
any one of the 14 position settings (13 clicks), each click indicates a .15" graduated
setting (total range = 2").
Pull backward from the front of the armpad: reverses the above process.
Armpad width adjustment
Push outward from the user's side of the armpad: allows armpad to adjust outward to be
set at any one of the 5 position settings (4 clicks), each click indicates a .125" graduated
setting (total range = .5").
Push inward from the outer side of the armpad: reverses the above process.
Armpad angle adjustment
Push outward from the front edge of the armpad: allows armpad angle to adjust, there
are 3 positions (2 clicks): angled outward, in line, angled inward
Push inward from the front edge of the armpad: reverses the above process.

Head rest/neck roll height adjustment
Push upward using both hands on either side of the rest: allows head rest/neck roll to
adjust upward to be set at any setting along the full 3" range
Push downward using both hands on either side of the rest: reverses the above
process.
Head rest/neck roll angle adjustment
Twist inward using both hands on either side of the rest: allows head rest/neck roll angle
to adjust inward to be set at any setting along the full +/- 45 degree travel range
Twist outward using both hands on either side of the rest: reverses the above process.
Ergonomic Accessories Inc.
1166 Gorham Street, Unit 2,
Newmarket, ON, L3Y 8W4
Tel: [phone]
Fax: [phone]
Email: [email protected]
Web: www.eaergo.com