ESCAM QF370 User manual

User Manual for Escam QF370
Waterproof Solar-Powered Camera with
PIR Alarm Sensor

Specifications
- Application operating systems: Android and iOS
- Mobile application name: UBo
- Connectivity: 2.4GHz WIFI
- Sensor: 3.0MP
- Video resolution: 3.0MP, 2048x1536
- Waterproof: IP66
- Compression format: H.264+/H.265
- Detection mode: PIR, AI humanoid detection
- Detection distance: 0-12m
- Detection angle: 95 degrees
- Gimbal angle: 105 degrees
- Built-in speaker: 3W
- Built-in microphone: monitoring range 20m
- Full-color night vision: Illumination 0.00LUX
- Infrared light: Infrared LED, Distance: 15m
- Battery: 10400mAh
- Solar cell material: monocrystalline silicon
- Solar cell power: 3.5W
- Maximum working power: 2.5W
- Standby power: 0.003W
- Cloud Storage: Alarm Event Recording
- Local storage: TF card (max 128GB)(not included)

1. Solar panel
2. Indicator
3. IR and white LED
4. Photosensitive sensor
5. Lens
6. Microphone
7. PIR
8. Reset button
9. MicroSD card slot
10.USB Silicone flap
11. Power button
Quick setup
Insert the USB cable of the solar panel to the USB port with the silicone flap
on the bracket base for battery charging. Press the Power switch to turn the camera
On. Wait for the voice prompt to pair the camera with the app.
Please close the silicone flap on the USB port to avoid rain leakage. Also,
make sure your phone is connected to the 2.4GHz WiFi network before pairing it with
the camera.

UBox app
To download the app, go to the Google Play Store for Android or App Store for
iOS and search for the UBox app. You can also scan the QR code below and
download and install the app.
When you download and install the app, open it put in your email address,
and press Register. Then go to your email and check for the verification code that
needs to be put into the app. If you didn’t get the email, please check the Spam
folder.
The next step is to set and confirm the login password. Password requires
more than 8 characters and a combination of letters and numbers.

Next, you have to set the WiFi connection. To do so, press Add Family, enter
your family name, and press Next. Put the necessary information like Country,
Province, City, and press Done. On the next screen, press Add Device to add your
camera.

Connect your camera to a power supply, make sure your smartphone is
connected to an available WiFi, and press Setup device. Wait for the blue LED and
voice prompt which indicates that the device is in pairing mode. If you don’t hear the
voice prompt, please press the Reset button and hold it until the blue indicator lights
up. The device will reboot and enter the pairing state. The app will put the WiFi name
automatically, and you have to put the correct WiFi password. Then, you can choose
the QR code configuration or Sound wave configuration method.
The Sound wave configuration method: Make sure the camera and
smartphone are within a 1m distance. When you hear a wave sound follow the steps
on your smartphone to finish the configuration.
The QR code configuration method: When you select this method, the QR
code will be displayed on your smartphone. Scan that QR code with the camera,
select the family name or device location, and press Done. The app will enter the
device list automatically which means the camera is ready to use.

Device settings
1. Select a family or location
2. Push notifications On/Off
3. App settings button
4. Preview
5. Add a device
6. Camera settings button
7. Toggle fullscreen
8. Cloud storage
9. Manual recording
10.Two-way talk button
11. Screenshot
12.Mute button

1. Account name and password change
2. Check and purchase the cloud storage
3. Check and purchase the AI cloud face ID
4. Check and add friends
5. Set the default voice and resolution
6. Add a smart device
Click the Calendar icon on the top right corner and choose the date to
playback the videos from the cloud storage. Choose the desired date to check all
videos from that day from the cloud.