ESCAM SL100 WF User manual

1:PRODUCTS & PACKING LIST
2 .INSTALLATION
2.1 Intergrated installation 2.2 Separated installation
Accessories needed
(not standard configuration)
1*Bracket 1*Extral power
cable 3M
Recommended
installing the camera
about 2.6M
1* USB charging cable
Microphone
Solar panel
Power switch
Battery 21700
Solar power
cable
Camera power
cable
USB charge port
TF
Screw
Screw
Lens
Universal bracket
Screw
Splice two solar panels together, then fix the iron plates with special
screws under the panel, finally install the universal bracket with the
right angle
1* Hexagon spanner
4* Tapping screws
2*plastic-cap screw
6*Hexagon socket screw
1* USB charge cable

7
Connect the device with power supply, and make sure your mobile phone
isconnected to an available Wi-Fi. Then press 'Setup device'
4.6 After the power on the device, wait for the blue LED and voice prompt
The device is waiting for pairing,Which means your device is in pairing mode.