esense MT1096 User manual
User’s manual
E-SENSE
A REVOLUTIONARY MULTI-TOUCH
WIRELESS OPTICAL MOUSE
MT1096
2
EN Index
Package contents ........................................................................2
Battery installation......................................................................2
System installation......................................................................3
Gestures instruction...................................................................3
Programming the mouse .........................................................5
Power ON/OFF..............................................................................5
Specication..................................................................................5
Package contents
¯User’s manual
¯Wireless Touch mouse
¯Nano receiver
¯2x AAA alkaline batteries
¯Software CD
Battery installation
1. Push this button
2. Slide cover up
3. Install batteries, note polarization marks.
4. Pull back cover.
5. Push cover end to lock it in place.
3
EN
Gestures instruction
1. Left nger single click on left button area
2. Left nger single click on left button area when right
nger is on the mouse
3. Single click with both ngers on the button area
System installation
1. Do not plug nano receiver until software installation
is nished. Insert software CD into CD-ROM drive,
follow on-screen messages to nish installation.
Note! If system message “driver has no windows
logo” occur, select option “continue anyway”.
2. Now plug nano receiver into USB port
3. Turn on the mouse.
Left button area Right button area
nop
Left click function
To use left click function you
can execute it three ways as
shown above.
Right click function
Use only one nger and sin-
gle click on right mouse but-
ton area.
4
EN Forward and backward
function
Use two ngers together and
slightly brush from right to left –
execute backward function. Brush
from left to right to execute for-
ward function.
Scroll wheel function
Use only one nger and brush up
or down to execute scroll wheel
function. Hold on CTRL key and
brush up/down to execute
zoom in/out function
(available in Internet Ex-
plorer, Ado-
be Reader).
Tilt wheel function
To execute tilt wheel function simply brush one nger
across the mouse.
Note! Install mouse driver prior to use this function
in Windows XP.
Please operate the mouse in touch sense area only.
5
EN
Programming the mouse
Double click on the mouse driver icon in system pop
tray to show conguration window. You can assign
available function from drop-down list.
Specication
¯Frequency: 2402-2480 MHz
¯Channel: 16
¯Power consumption: 25mA, 3V
¯Max. tracking speed: 75cm/s
¯Sensor: optical
¯Resolution: 1000DPI
¯Transmission range: 10m
¯Interface: USB
¯System: Windows XP, Vista, 7.
Specication and appearance are subject to change
without prior notice.
Power ON/OFF
For maximum power sav-
ing you can turn o the
mouse when it is not in
use for longer period.
Table of contents
