Razer RC30-030501 User manual

UDATE: 15 OCTOBER 2019
PRODUCT MANUAL FOR GAMING MOUSE
MODEL: RC30-030501

WHAT’S INSIDE
GAMING MOUSE (MODEL: RC30-030501)
[PLACEHOLDER IMAGE]
A. Left mouse button
B. Right mouse button
C. Scroll wheel
D. Mouse button 5
E. Mouse button 4
F. Ultraslick mouse feet
G. Wireless USB dongle compartment
H. True 20,000 DPI 5G optical sensor
I. DPI indicator
J. DPI cycle up button
K. Power on/off switch
L. Wireless USB dongle
M. Charging Cable
N. Charging Dock
Default DPI stages are as follows: 400, 800, 1800, 2400, and 3200. The DPI stages can be
customized using Razer Synapse 3.
FOR GAMERS. BY GAMERS.™1

WHAT’S NEEDED
PRODUCT REQUIREMENTS
PC with a free USB port
RAZER SYNAPSE REQUIREMENTS
Windows®7 64-bit (or higher)
Internet connection
500 MB of free hard disk space
FOR GAMERS. BY GAMERS.™1

LET’S GET YOU COVERED
You’ve got a great device in your hands complete with a 2-year limited warranty coverage.
Now maximize its potential and score exclusive Razer benefits by registering
at razerid.razer.com
[PLACEHOLDER IMAGE]
Your product’s serial
number can be found
FOR GAMERS. BY GAMERS.™2

GETTING STARTED
CHARGING YOUR RAZER VIPER ULTIMATE
Plug the charging cable from your computer’s USB port to your Viper Ultimate.
[PLACEHOLDER IMAGE]
This connection also acts as the wired mode for your Razer device.
For best results, please fully charge your Razer Viper Ultimate before using it for the first time.
A depleted battery will be fully charged in approximately 4 hours. If the Razer Viper Ultimate
has not been used for an extended period, you may need to recharge it before use.
The Razer Viper Ultimate requires a USB connection that is able to supply sufficient power to
charge the battery. The battery charging process of the Razer Viper Ultimate may be affected
if connected to a non-powered USB hub or non-powered USB ports found on certain
keyboards and other peripherals. When in doubt, it is preferable to connect the Razer Viper
Ultimate directly to the USB port of your computer.
LOW POWER INDICATOR
The Razer Viper Ultimate ’s scroll wheel will blink red twice in repeated intervals to indicate
that the battery’s power is less than 25%. This lighting sequence will repeat until the battery is
drained or the mouse is connected to the PC via the charging cable.
[PLACEHOLDER IMAGE]
FOR GAMERS. BY GAMERS.™3

The indicator percentage can be customized using Razer software.
USING THE USB WIRELESS DONGLE
1. Remove the compartment cover from your Razer Viper Ultimate.
[PLACEHOLDER IMAGE]
2. Remove the USB wireless dongle from your mouse.
[PLACEHOLDER IMAGE]
3. Reattach the compartment cover onto your Razer Viper Ultimate and make sure it is
securely fastened.
[PLACEHOLDER IMAGE]
FOR GAMERS. BY GAMERS.™4

FOR GAMERS. BY GAMERS.™5

4. Insert the USB wireless dongle into your computer’s USB port.
[PLACEHOLDER IMAGE]
5. Switch on the Razer Viper Ultimate.
[PLACEHOLDER IMAGE]
Your Razer Viper Ultimate is now ready for use in wireless mode.
POWER
POWER
FOR GAMERS. BY GAMERS.™6

USING THE CHARGING DOCK
1. Plug the charging cable from your computer’s USB port to the charging dock.
[PLACEHOLDER IMAGE]
2. Insert the USB wireless dongle into your computer’s USB port.
[PLACEHOLDER IMAGE]
You can use the charging dock replenish your mouse’s battery and to extend the reach of
your USB wireless dongle. You can also connect to Razer Synapse and place your Razer
Viper Ultimate on the charging dock to view the mouse’s current battery status.
Color
Battery
Percentage Effect
Red <25%
Breathing
Yellow 26%-50%
Breathing
Orange
51%-75%
Breathing
FOR GAMERS. BY GAMERS.™7

Green 76%-99%
Breathing
Green 100%
Static
FOR GAMERS. BY GAMERS.™8