ESI FlexCharge9-Pod User manual

SET-UP AND USE
FlexCharge9-Pod
FCH9-POD Rev B 5/17
Model FCH9-POD

SAFETY INSTRUCTIONS
Always read the safety instructions carefully.
• Do not install near heat sources such as radiators, heat registers stoves,
or other equipment (including amplifiers) that produce heat.
• Unplug the unit during lightning storms or when unused for extended
periods of time.
• To reduce the risk of fire or electric shock, do not expose this unit to
rain or moisture, including any drips or splashes.
• Objects filled with liquids such as vases, should never be placed on or
near the unit.
• Do not open due to risk of electric shock hazard.
• The outlet used to power the unit should be easily accessible and
located near the equipment.
• The unit is for indoor use only.
• Please refer to the marking label on the unit for input and output
ratings. Do not overload the power supply.
• DO NOT USE this product in life support applications where failure of
this unit can reasonably be expected to cause the failure of the life
support equipment or to significantly affect its safety or effectiveness is
not recommended. Do not use this equipment in the presence of a
flammable anesthetic mixture with air, oxygen or nitrous oxide.
• This product intended for use as a charging devise only. Not intended
for use as an external power supply on a permanent basis.
• Failure to adhere to these instructions effectively voids the warranty.
Safety Instructions
2
FLEXCHARGE9-POD

SET-UP OF THE FLEXCHARGE9 is quick and easy. Simply position the pod in the
desired location and plug the power cord into a wall outlet. No assembly is
NOTE:
to your satisfaction.
Tips
• The FlexCharge9 is ideal for the work surfaces in meeting rooms
and conference rooms. The five surge-protected AC outlets and
four USB charging ports provide simultaneous power to multiple
computing devices, from tablets and smart phones to laptops
and projectors.
• Mobile professionals demand instant access to information and
resources on their mobile devices. Nowhere is that access more
important than in meeting rooms and conference rooms, where
people share ideas to make informed decisions. Reliable AC power
is essential in these settings.
required.
FLEXCHARGE9-POD
3

Power Outlets
(Five Total)
(Four Total)
Usage
•
FlexCharge9 pod.
• Plug up to four USB devices — tablets, smart phones, etc. — into the fast-
charging USB ports to ensure reliable power to those devices in even the
longest-lasting meetings.
Additional Features
• Power light indicates that power is being supplied to the FlexCharge9 pod.
Be sure to check this light before expecting devices to be powered or
charged.
• Protected indicator light lets you know your equipment is protected from
Power Reset
• Each 3.1A USB quick-charging
module is good for charging
1 tablet and 1 smart phone at
the same time.
• Rotated AC outlet orientation designed to accomodate larger plugs.
Quick Charging
USB Charging Ports
• Circut breaker integrated into
the bottom of device and can
be reset as needed.
• The Protected LED light indicates
that the built-in surge protective
device is functional. If the surge
protection circuitry is damaged,
the Protected LED will turn off to
indicate that a fault has occured.
• Product can be placed over a grommet hole and the power cord can then
be pulled through to a power source under the table.
voltage spikes.
FLEXCHARGE9-POD
4

800.833.3746 esiergo.com
© 2017 ESI Ergonomic Solutions. All rights reserved. FLEXCHARGE9-POD Rev B 5/17