ESPEC RT-14WB User manual

Package Contents
RT-14WB/14N Temperature 2ch
thermo recorder Temperature Sensor
RTH-1010 x 2
AA Alkaline
Battery
(LR6) x 2
USB Mini-B Cable
(RTH-9010)
Manual Set
(Warranty Included)
Registration
Code Label
RS-14WB/14N Temperature 1ch, Humidity 1ch
thermo recorder Temperature-Humidity
Sensor RSH-4010
AA Alkaline
Battery
(LR6) x 2
USB Mini-B Cable
(RTH-9010)
Manual Set
(Warranty Included)
Registration
Code Label
RS-14WBH/14NH Temperature 1ch, Humidity 1ch (High-Precision Type)
thermo recorder High Precision
Temperature-Humidity
Sensor RSH-3020
AA Alkaline
Battery
(LR6) x 2
USB Mini-B Cable
(RTH-9010)
Manual Set
(Warranty Included)
Registration
Code Label
Getting Thermo Recorder Ready for Installation
Battery Installation
Make sure to use new batteries (including for replacement) and insert in the correct
direction.
Sensor Connection
RT-14WB/14N RS-14WB/14N
RS-14WBH/14NH
About RT-14WB/14N Internal Sensor
Channel 1 has a default connection to an internal temperature sensor. When an
external sensor is not connected, the internal sensor will be used.
Safety Precautions and Instructions
The following items should be strictly obeyed for the safe
usage of this product, and for protecting yourself and other
people from bodily harm and/or damage to property.
Explanation of Symbols
<Warning Symbols>
DANGER
These entries are actions that absolutely under no
circumstance should be taken. The taking of such an
action may cause serious personal physical damage
or death.
CAUTION These entries are actions that if taken may lead to
physical injury or damage to persons or things.
<Picture Symbols>
Denotes an
important warning
or caution.
Denotes a
forbidden
action.
Denotes an action
that should not be
carried out.
DANGER To Prevent Serious Accidents
Do not disassemble, repair or modify the unit and/or accessories.
Do not use the unit in any environment that is exposed to
chemicals and harmful gases. Doing so may cause corrosion
and/or other danger to the unit. Also, coming in contact with
hazardous substances may cause bodily harm to the user or
people nearby.
This product is not water resistant. If water or a foreign object
enters the case, immediately remove batteries and stop using it.
Do not handle the unit, remove batteries or cables with wet hands.
Do not touch the unit or AC adaptor during thunder and lightning,
as this may cause electrocution.
This product has been designed for private and/or industrial
use only. It should not be used in situations where strict safety
precautions are necessary such as with medical equipment, or in
systems directly or indirectly connected with human life or well-
being.
Do not drop or expose the unit to a strong impact.
Do not cut or process the cords for the communication cables.
Also, do not twist, pull on or swing any of the cords.
To prevent damage to the unit from static electricity, remove static
electricity from your body by touching metal around you (such as
a door knob and window frame) before touching the unit.
Place and store the unit and accessories out of the reach of
children.
We are not responsible for any damage, malfunction or trouble,
whether direct or indirect, caused by the use of our product.
Do not use any battery, sensor, or cable other than those specied
by ESPEC MIC Corporation.
Do not put anything on top of the cable or the unit. This may
cause overheating.
Do not disconnect the USB cable during USB communication.
Doing so may cause adverse effects to the unit and/or PC.
Make sure that sensor and cable plugs are all inserted fully, so as
not to cause an improper connection. Also, when unplugging the
cable from the unit, do not pull the cord, but hold the connector to
disconnect.
If the unit produces heat, emits smoke or a strange smell, or
makes unusual noise, immediately remove the batteries and stop
using it. Also, unplug the unit from the PC.
If the unit is not to be used for a long period of time, remove
batteries. Leaving batteries inside the unit may cause battery
leakage and malfunction. Install new batteries when starting or re-
starting to use a unit.
CAUTION Do not place or store in the following
areas:
• Areas exposed to direct sunlight
• Areas subject to direct ames or heaters, as well as areas in which hot air
accumulates and creates extremely high temperatures
• Areas exposed to static electricity
• Areas exposed to strong magnetic elds
• Areas exposed to water leakage
• Areas subject to condensation or wet areas
• Areas exposed to excessive vibration
• Areas exposed to excessive smoke, dust or dirt.
CAUTION Other Precautions
• Use the unit in the specied operating environment. Do not use it for any
purpose other than for which it was designed.
• Condensation may occur inside the case when a unit is moved from one
environment to another where there is a great difference in temperature.
• Do not use the unit in wet areas or places exposed to water such as bathroom.
• When connecting the unit to your PC, make sure to follow all warnings and
directions from your computer manufacturer.
• We shall not guarantee the unit's operation if it has been connected to a
PC using a USB hub or a USB extension cable.
• Do not insert any foreign objects into any of the units' jacks.
• If the unit gets dirty, wipe it with a clean cloth.
• Make sure to remove dust and dirt from plugs of any cables.
• Battery terminals may provide insufcient contact due to age or vibration.
This may lead to data loss.
• Please note that this document has been written based on the
presupposition that details about contracts with an Internet provider,
specic network environments and the set-up of any other necessary
equipment to enable network connection has already been taken care
of by the User and that connection has been conrmed as workable.
ESPEC MIC Corporation shall not be responsible for any damages which a
contractor, a user or a third party may suffer, whether direct or indirect, due
to the inability to communicate or use communication devices.
CAUTION Notices about Sensors
• Do not connect any sensor to the unit other than those specied by ESPEC
MIC Corporation.
• Make sure to use sensors within the measurement range indicated in the
specications for that sensor.
• Do not connect the sensor to any thermo recorder other than those
specied by ESPEC MIC Corporation.
• Do not expose the sensor to a strong impact. This may adversely affect
measurement accuracy and cause damage or malfunction.
• When the sensor is not to be used for a long period of time, please store it
at normal temperature and humidity.
• The included sensor is not water resistant. If the sensor gets wet,
immediately remove the sensor from the unit and wipe it with a clean
cloth as soon as possible. Then allow the sensor to dry in normal room
temperature before using it again.
• Do not use the sensor on the human body.
Temperature-Humidity Sensor
• If extremely severe temperature changes occur, it may result in large errors
in humidity measurement. Once the sensor's temperature becomes stable,
the measurements will return to normal.
• The temperature-humidity sensors will with normal use experience losses
in precision and sensitivity over time due to degradation. If the sensor is
being used in an unsuitable environment (smoky or dusty places) it may be
necessary to change the sensor sooner.
• When using the sensor in an environment where the humidity is under 30
%RH, the measurements may sometimes uctuate. This is not abnormal.
• Do not expose to condensation, dampness, corrosive gases, or organic
solvents.
Please Read First RT-14WB/14N
RS-14WB/14N
RS-14WBH/14NH
RT/RS-14WB
(Wireless LAN)
RT/RS-14N
(Wired LAN)
Operation Buttons Battery Cover USB Port
Sensor Jack
Channel 1
Sensor Jack
Channel 2
(RT-14WB/14N only)
Power Button
Ethernet Port (LAN)
PoE LED
turns ON when running on
external power.
LINK LED
ashes during network
communication.
• The Introductory Manual also explains operations using the operation buttons.
Part Names

RT-14WB/14N RS-14WB/14N RS-14WBH/14NH
Measurement
Channels
Temperature 2ch Temperature
1ch
Humidity 1ch Temperature
1ch
Humidity 1ch
Sensor Thermistor Thermistor Polymer
Resistance
Thermistor Polymer
Resistance
Measurement Units °C,°F °C,°F %RH °C,°F %RH
Measurement Range
Internal Sensor -10 to 60°C (*1) - - - -
External Sensor -40 to 110°C
(Supplied Sensor)
-60 to 155°C
(Optional ensor:
Fluoropolymer Coated Type )
0 to 55°C 10 to 95 %RH -25 to 70°C 0 to 99 %RH
(*2)
Accuracy Avg. ±0.3°C
at -20 to 80°C
Avg. ±0.5°C
at -40 to -20°C, 80 to 110°C
±0.5°C ±5 %RH
at 25°C,
50 %RH
±0.3°C
at 10 to 40°C
±0.5°C
at all other
temperatures
±2.5 %RH
at 15 to 35°C,
30 to 80 %RH
Measurement
Resolution
0.1°C 0.1°C 1 %RH 0.1°C 0.1 %RH
Responsiveness Thermal Time Constant:
Approx. 75 sec.
Response Time (90%):
Approx. 190 sec.
Response Time (90%):
Approx. 7 min.
Response Time (90%):
Approx. 7 min.
Logging Capacity 8,000 data sets (One data set consists of readings for all channels in that type of unit.)
Recording Interval Select from 15 choices: 1, 2, 5, 10, 15, 20, 30 sec. or 1, 2, 5, 10, 15, 20, 30, 60 min.
Recording Mode Endless (Overwrite oldest data when capacity is full)
One Time (Stop recording when capacity is full)
Auto-upload Interval Select from 15 choices: OFF (No auto-upload), 1, 2, 5, 10, 15, 20, 30 min. or 1, 2, 3, 4, 6, 12,
24 hrs.
Communication
Interfaces
RT-14WB/RS-14WB: Wireless LAN Communication
Standard : IEEE 802.11b/g/n
Security (*3): WEP (64bit/128bit), WPA-PSK(TKIP), WPA2-PSK(AES)
WPS 2.0 : Push Button Conguration
Protocol : HTTP(*4), DHCP, DNS
RT-14WB/RS-14WB: Bluetooth Communication
Bluetooth 4.2 (Bluetooth low energy)
RT-14N/RS-14N: Wired LAN Communication
100BASE-TX/10BASE-T (RJ45 Connector)
Protocol : HTTP(*4), DHCP, DNS
USB Communication
USB 2.0 (Mini-B connector)
Power (*5) Battery: AA Alkaline x 2, AA Ni-MH x 2
External: USB Bus 5V 200mA, AC Adaptor AD-05A2 or AD-05C2, PoE IEEE 802.3af
(RT-14N/RS-14N only)
Battery Life (*6) RT-14WB/RS-14WB: Approx. 10 days to 15 months (*7)
RT-14N/RS-14N: Approx. 10 days to 1.5 years (*8)
Dimensions H 58 mm × W 78 mm × D 26 mm
Weight Approx. 55 g
Operating
Environment
Temperature -10 to 60°C (*9), Humidity 90 %RH or less (no condensation)
Software
RT/RS-14WB for Windows, ESPEC Graph, THERMO RECORDER DATA SERVER, T&D Thermo
Compatible OS (*10) RT/RS-14WB for Windows, ESPEC Graph, THERMO RECORDER DATA SERVER (For PC)
Microsoft Windows 10 32 / 64 bit
Microsoft Windows 8 32 / 64 bit
Microsoft Windows 7 32 / 64 bit
T&D Thermo (For Mobile Devices)
Android OS, iOS
Display Languages
(*11)
English
*1: When Auto Upload is used frequently, the measurement of the internal sensor may rise by around 0.3°C . When using external
power, the thermo recorder itself generates heat and the internal sensor will report a temperature much higher than ambient; we
recommend using an external temperature sensor in this case.
*2: When continually used in environments with temperatures above 60°C, accuracy of humidity measurements will decrease over
time. Also, humidity cannot be measured at temperatures below -20°C.
*3: If you wish to use the WPS feature, set the security type of the wireless LAN access point to "WPA2-PSK(AES)" or "None".
*4: HTTP client. Proxy supported.
*5: When using external power, the internal temperature of the thermo recorder rises.
*6: Battery life is highly dependant on the Auto-upload interval; at 1 min will give 10 days of usage, and at 12 hours or more will yield
the maximum lifetime. Other inuential factors include LAN environment, ambient temperature, recording interval, and battery
performance. All estimates are based on operations carried out with a new battery and are in no way a guarantee of actual battery life.
*7: Shows the estimated battery life with Bluetooth and Auto-Upload ON. It will be 1.2 times longer with Bluetooth OFF.
*8: Shows the estimated battery life with Auto-Upload ON.
*9: -10 to 45°C when using external power (RT-14N/RS-14N only).
*10: For installation, it is necessary to have Administrator (Computer Administrator) rights.
*11: We recommend using an operating system in the same language as the display language. Operation in different languages is not
guaranteed.
The specifications listed above are subject to change without notice.
Important Notices and Disclaimers
In order to properly use this product, please carefully read all documents that accompany the product before using.
• All rights of the attached documents belong to ESPEC MIC Corporation. It is prohibited to use, duplicate and/or arrange a part or
whole of the attached documents without the permission of ESPEC MIC Corporation.
• Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries.
• Google, Android, and Google Play are trademarks or registered trademarks of Google Inc.
• Apple and App Store are trademarks or registered trademarks of Apple, Inc. in the U.S. and other countries.
• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
ESPEC MIC Corporation is under license.
• All registered trademarks, company names, product names and logos mentioned herein or for products being used are the property
of ESPEC MIC Corporation or of their respective owners.
• Specications, design and other contents outlined in the attached documents are subject to change without notice.
• Please follow the safety precautions outlined in the attached documents carefully. We cannot guarantee nor are we responsible for
safety if this product is used in any manner other than was intended.
• On-screen messages in the attached documents may vary slightly from the actual messages.
• Please notify the shop where you purchased this product or ESPEC MIC Corporation of any mistakes, errors or unclear explanations
in the attached documents.
• ESPEC MIC Corporation accepts no responsibility for any damage or loss of income caused by the use of our product.
• Accompanying documents cannot be reissued, so please keep them in a safe place.
• Please read the warranty and provisions for free repair carefully.
For product information or questions contact us at:
3-5-6 Tenjinbashi Kita-ku, Osaka 530-8550 JAPAN
[phone] / [phone]
2019.04 16508123004 (1st Edition)
RT/RS-14WB Series Warranty
Product under Warranty
(Excluding Accessories)
RT-14WB RS-14WB RS-14WBH
RT-14N RS-14N RS-14NH
Warranty Period 1 year from date of purchase
Date of Purchase
Customer's name
Address
Phone No.
Distributor's name
Address
Phone No.
Object of Repair Main Unit (excluding sensors and any other options.)
Method of Repair Send in for Repair
Provisions for Free Repair
1. If the unit does not work properly despite the fact that the customer used it properly and in line with the manual, the Unit
shall be repaired free of charge through the distributor which sold the unit.
2. If the customer requests free repair because of trouble within the warranty period, bring or send the unit along with the
warranty to the distributor.
3. If you have moved after purchasing, or there are difculties contacting the distributor from which you purchased the unit,
please contact ESPEC MIC directly for service.
4. Free repair is not available in the following cases even though it is within the warranty period:
a. Trouble or damage was caused by careless operation, natural disaster, re, public pollution, use of a power source
other than specied, or external factors such as intrusion of insects.
b. If repair, adjustment, disassembly or modication of the unit has been carried out by a person other than a ESPEC MIC
authorized engineer.
c. Trouble or damage was caused by transportation, movement or dropping of the unit after purchase.
d. Failure to submit the warranty or failure to ll in all items required in the warranty.
5. The warranty cannot be reissued.
This warranty only promises customers free repair within the period and conditions claried in this warranty. Therefore, the
customer's legal rights will not be limited by this warranty. For further information on repair and other service questions
after the termination of the warranty period, contact your distributor.
Options Unit: mm
Temperature Sensors (Tor RT-14WB/14N) ---------------------------------------------------
Materials Thermistor TPE Resin TPE Resin-Shielded Wire M3 Crimp Terminal
Compaction Tube Stainless Pipe (SUS304) Stainless Pipe (SUS316)
Temperature
Measurement Range
-40 to 110°C
Sensor Temperature Durability -50 to 115°C
Temperature
Measuring Accuracy
Avg. ±0.3°C at -20 to 80°C,
Avg. ±0.5°C at -40 to -20, 80 to 110°C
Waterproof Capacity None (Only the stainless pipe is waterproof)
RTH-1010 TPE Resin-Shielded Sensor
Cable Length: 0.6 m
Response Time (90%): Approx. 190 sec. (in air)
RTH-1020 Screw-down Sensor
Cable Length: 0.6 m
Response Time (90%): Approx. 210 sec. (in air)
RTH-1030 Stainless Protection Sensor
Cable Length: 0.6 m
Response Time (90%): Approx. 11 sec. (in agitated water)
RTH-1040 Stainless Protection Sensor
Cable Length: 0.6 m
Response Time (90%): Approx. 15 sec. (in agitated water)
RTH-1050 Stainless Protection Sensor
Cable Length: 0.6 m
Response Time (90%): Approx. 10 sec. (in agitated water)
RTH-1060 Stainless Protection Sensor
Cable Length: 0.6 m
Response Time (90%): Approx. 11 sec. (in agitated water)
Temperature Sensors: Fluoropolymer Coated Type (For RT-14WB/14N) ----------------
Materials Thermistor Stainless pipe (SUS316) Fluoropolymer Compaction Tube
Fluoropolymer-Coated Electrical Wire
Temperature Measurement Range -60 to 155°C
Sensor Temperature Durability -70 to 180°C
Temperature Measuring
Accuracy
Avg. ± 0.5°C at 40 to 80°C,
Avg. ± 1.0°C at -60 to -40°C, 80 to 100°C,
Avg. ± 2.0°C at 100 to 155°C
Waterproof Capacity IPX7 immersion proof (sensor/cable)
RTH-1110 Fluoropolymer Coated Sensor
Cable Length: 0.6 m
Response Time (90%): Approx. 80 sec. (in air) / Approx. 7 sec. (in agitated water)
Stainless Protection Sensor RTH-1120
Cable Length: 2 m
Response Time (90%): Approx. 150 sec. (in air) / Approx. 7 sec. (in agitated water)
Stainless Protection Sensor RTH-1130
Cable Length: 2 m
Response Time (90%): Approx. 90 sec. (in air) / Approx. 3 sec. (in agitated water)
Temperature-Humidity Sensors (For RS-14WB/14N) ---------------------------------------
* Do not expose to condensation, dampness, corrosive gases, or organic solvents (or insecticides for High Precision Temperature-Humidity Sensors)
* The temperature-humidity sensors will with normal use experience losses in precision and sensitivity over time due to degradation.If the sensor
is being used in a smoky or dusty environment, the surface of the sensor will accumulate impurities causing a further decrease in the sensor's
performance.
RSH-4030 / RSH-4010 RSH-3020
Materials Temp-Humidity Sensor Polypropylene Resin ABS Resin
Vinyl Chloride Coated Wire
Temperature Measurement Range 0 to 55°C -25 to 70°C
Humidity Measurement Range 10 to 95 %RH 0 to 99 %RH (*1)
Temperature Measuring Accuracy ± 0.5°C ±0.3°C at 10 to 40°C,
±0.5°C all other temperatures
Humidity Measuring Accuracy ± 5 %RH at 25°C, 50%RH ±2.5% at 15 to 35°C, 30 to 80 %RH
Waterproof Capacity None
*1: When continually used in environments with temperatures above 60°C, accuracy of humidity measurements will decrease over time. Also,
humidity cannot be measured at temperatures below -20°C.
RSH-4030
Temperature-Humidity
Sensor
RSH-4010
Temperature-Humidity Sensor (Cable Type)
Cable Length: 1.5 m
RSH-3020
High Precision Temperature-Humidity Sensor
Cable Length: 1.5 m
Sensor Extension Cable ------------------------------------------------------------------------
RTH-1210 Extension Cable
Cable Length: 3 m Materials: Vinyl Coated Electrical Wire
* Possible to use only one cable per temperature sensor.
* Possible to use up to three cables per temperature-humidity sensor.
Others ---------------------------------------------------------------------------------------------
RTH-9010 USB Mini-B Cable AD-05A2 / AD-05C2 AC Adaptor USB Mini-B TYPE
Cable Length: 1.5 m Input: AC100 - 240V
Output:DC 5V, 1A
Frequency : 50/60Hz
Cable Length: 1.5 m
AD-05A2 AD-05C2
RTH-2020 Wall Attachment
Materials: Polycarbonate
Included: Screw x 2 and Double-sided Tape x 1