Essential Garden 34251R01 User manual

kensington solar fountain
Product code: 0-02620617-7
UPC code: 840594089018
Supplier Ref: 34251R01
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com
For questions or comments about product:
Email: [email protected] or Call: 813-343-5775
Please refer to part numbers when reordering
Made in / Hecho en CHINA for Kmart Corporation, Hoffman Estates, IL 60179
SHOP kmart.com
owner’s
manual
Date of purchase: _____/ _____/ _____

performance
Important ü
û
û
!
When reconnecting the pump and panel take care to
ensure the connectors are water tight. Slightly twist the
connectors when pushing together, ensure the red
sealing ring remains in it’s groove and is not displaced.
û
ü üü üü
pump removal (for maintenance)
Remove the top tier and turn upside down on a soft
surface. As you turn ensure the solar panel is supported
so that it does not fall out. Remove the pump from the
connecting tubes and disconnect the cable.
Solar pump and panel assembly.
When re-assembling ensure tubes (1) are connected
and bung (2) is securely fitted in the hole.
12
maintenance
To maintain optimum performance regularly
clean the solar panel using water or glass
cleaner in conjunction with a non abrasive
sponge or cloth.
0°C/32°F
û
üFrost can cause damage to the pump and fountain. The panel & pump
assembly MUST be removed if the water is likely to freeze. We also
recommend storing your entire fountain in a frost proof environment if
temperatures are likely to remain consistently below freezing.
frost
If the fountain head, nozzle or tubes
become blocked rinse through with water.
12
This product is designed primarily to operate in summer months but will also work in
spring and autumn provided there is good sunshine. Performance is directly related to the
amount and strength of sunlight received.
ûû
ü
ü
In bright direct sunlight your pump will work
well with a consistent fountain height.
In slightly cloudy conditions your pump will
work however fountain height will vary as
clouds pass in front of the sun.
In overcast conditions the solar panel does
not generate enough power to run the pump
and it will NOT work.
At night the solar panel does not generate
power and your pump will NOT work.
accessories
The fountain head accessory can be used to enhance your fountain.
It will however only work effectively in bright sunlight when water
flow is high.
The extension nozzle can be used in conjunction with the fountain
head to raise it higher above the water or on it’s own to produce a
finer higher stream of water.
Note: Take care when using the nozzle in bright sunlight as the high
water stream may cause splashing that will empty your fountain. If
this occurs simply remove the nozzle or add the fountain head.

problem solving
assembly
First screw the main bowl to pedestal base then add
the top tier.
Solar panel and pump are pre-assembled into the top
tier. Just align the top tier and place into the main bowl.
Note: Water must be regularly topped up. We recommend
regularly changing the water to ensure it remains clean
and free from debris.
Fill the main bowl with water.
If you have any problems with your solar fountain please follow the steps below.
1. Check the fountain is positioned correctly, receiving sunlight and not in shade
2. Check water level and ensure the pump is submerged
3. Check connection between the pump and panel
4. Check tubes, fountain heads and nozzles are clean and unblocked
5. Clean pump and panel as shown and change water
6. If problems persist contact customer services, using the details on back page of
this booklet
ü
`
û
position
Position your fountain so that it receives direct sunlight. The fountain will not work if the
solar panel is shaded. The fountain must be positioned on a level surface to ensure even
water flow over the spouts.
pump maintenance
Filter cover can simply be pulled off as
shown Remove filter material and rinse in water
Turn impeller cover to release as shown,
impeller can then be easily removed Rinse all parts thoroughly in water
We recommend that you regularly carry out maintenance to ensure
optimum performance of your fountain.