ESTELLE ESIPLHRSKNA User manual

ADVANCED IPL HAIR REMOVAL
AND SKIN REJUVENATING SET
ESIPLHRSKNA

This device may not be suitable for everyone. Ensure to read all instructions and warnings in
this user guide prior to first use. Retain this user guide for future reference.
DO NOT use this device if you fall under any one of the following conditions:
•Never use this device if you have dark skin, rarely or never sunburn. Use of the device
leads to high risk of developing skin reactions (for example, hyperpigmentation,
strong redness, burns).
•You are pregnant or breast feeding.
•You have any active implants (for example, pacemaker, neurostimulator, insulin
pump).
•Your skin is currently being treated with or has recently been treated in the past week
with alpha hydroxy acids (AHAs), beta hydroxy acids (BHAs), topical isotretinoin, or
azelaic acid.
•You have taken any form of Isotretinoin (for example, Accutane, Roaccutane) in the
last six months. This treatment can make skin more susceptible to tears, wounds,
and irritations.
•You are taking photosensitising agents or medications. Check the package insert of
your medicine and never use the device if it is stated that the medicine may cause
photoallergic reactions, phototoxic reactions, or if you must avoid sunlight.
•You take anticoagulation medications, including heavy use of aspirin, in a manner
which does not allow for a minimum 1-week washout period prior to each treatment.
•You have received radiation therapy or chemotherapy within the past 3 months.
•You are on painkillers which reduce the skin's sensitivity to heat.
•You take immunosuppressive medications.
•You have had surgery in the areas to be treated in the last 3 weeks.
•You have diabetes or other systemic or metabolic diseases.
•You have congestive heart disease.
•You have a disease related to photosensitivity (for example, polymorphic light
eruption (PMLE), solar urticaria, porphyria).
•You have a history of collagen disorder, including a history of keloid scar formation or
a history of poor wound healing.
•You have photosensitive epilepsy.
•Your skin is sensitive to light and easily develops a rash or an allergic reaction.
•You have a skin disease (for example, active skin cancer), a history of skin cancer or
any other localised cancer in the areas to be treated.
SAFETY & WARNINGS

•You have a history of vascular disorder (for example, the presence of varicose veins,
vascular ectasia) in the areas to be treated.
•You have any bleeding disorder.
•You have a history of immunosuppressive disease (for example, HIV, AIDS).
•It is not recommended for use for males on the face, neck, beard growing areas, or
the whole genital region.
Other warnings
•This device is not intended for use by persons (including children) with reduced
physical, sensory, or mental capabilities, unless they have been given supervision or
instruction concerning use of the device by a person responsible for their safety.
•Children should be supervised to ensure that they do not play with the device.
•The device is not intended for children under the age of 15 years. Teenagers aged
between 15 and 18 years can use the device with the consent and/or assistance of a
parent/guardian.
•Always check the device before use. If the device or AC adapter is damaged, stop use
immediately and contact help.Kogan.com for assistance.
•If the UV filters on the treatment window of the magnetic filter attachments are
damaged, stop use immediately and contact help.Kogan.com for assistance.
•If the device is broken, do not touch any inner components to avoid risk of electric
shock.
•Keep the device and AC adapter dry at all times.
•Do not use this device in wet environments (for example, near a filled bath, a running
shower, or a filled swimming pool).
•Do not attempt to modify or cut off any part of the AC adapter or cord.
•Do not use on areas where you use long-lasting deodorants. This can result in
adverse skin reactions.
•Do not use over or near anywhere artificial (for example, silicone implants,
subcutaneous injection ports, insulin dispensers, piercings).
•Do not use this device over tattooed areas.
•Do not use anything (for example, pens, pencils) to mark the areas to be treated. This
may cause burns on your skin when the device is used.
Note:
This list is not exhaustive. If unsure whether you can use the device, it is highly
recommended to consult a doctor.

•Hair removal by intense pulse light (IPL) sources can cause increased hair growth in
some individuals. Based upon currently available data, the highest risk groups for this
response are females of Mediterranean, Middle Eastern and South Asian heritage
treated on the face and neck.
•The AC adapter, treatment window and filters can become very hot after usage. Do
not touch the adapter, treatment window and filters without having these cool down.
•If you have a darker coloured skin, be careful with treating a darker area immediately
after a lighter area. The skin tone sensor may not immediately block the treatment on
the darker body area.
Note:
If you notice a change in skin tone between treatments (for example, due to tanning),
we recommend you perform a skin test and to wait 30 minutes before your next
treatment.

Top view
Front view
OVERVIEW
Level indicators
Auto mode indicator
Power button
Flash button
AC adapter
Remaining flashes left
Skin sensor indicator
Treatment window
(non-detachable
basic filter)
LCD display

Bottom view
Magnetic filter attachments
Power connector
Treatment window
(small filter) Treatment window
(large filter)

1. Soak your desired area in warm water to allow your skin to soften. Exfoliate the area
with a body scrub or loofah to remove any dead skin. Apply shaving cream
(not included) to the area and using the razor (included), shave the unwanted hair.
2.Clean the treatment window and magnetic filter with dry or damp cloth. Ensure there
is no dust, hair, or stains. The window area and magnetic filter should be dry, clean,
and intact.
BEFORE FIRST USE

Notes:
•For first time users, it is highly recommended to start at level 1.
•After adjusting the intensity level, the intensity level will automatically be set to
the same level when the device is turned on in future uses.
Powering and level setting
1. Connect one end of the AC adapter into the power connector of the device. Plug the
other end of the AC adapter into a socket and switch the socket on. The LCD screen
on the device will show ‘ ’.
2. Press and hold the power button for 3 seconds to turn on the device. The LCD
display will then show the remaining number of flashes available. For first time users,
the display will show ‘ ’. Press the power button to adjust the intensity level of
the light that will emit through the treatment window. There are 5 intensity levels
available. The higher the level, the stronger the light. The level set will also be
reflected with the level indicator lights on the display.
OPERATION
Note:
For first time users, before using it on the whole body, test the device on small area of
skin. If you experience adverse reactions within 30 minutes after use, stop using the
device immediately.

Modes
This device features four modes.
•Manual
•Continuous
•Auto
•Skin rejuvenation
Manual mode
This mode is recommended for removing hair from smaller areas (for example, upper lip,
armpit, face, bikini line).
1. Place the magnetic small filter onto the top of the device.
2.Place the device at a 90° degree angle against your body, keeping the treatment
window fully covered by your skin. When the skin sensor indicator ‘ ’ appears on the
display, press the flash button and one flash will emit from the treatment window.
Repeat this process as necessary to the area you wish to remove hair.
3.When finished, press and hold the power button for 3 seconds. The display will show
a 10 second countdown before the device turns off. Switch off the power at the socket
and unplug the AC adapter.

Continuous mode
This mode is recommended for larger areas (for example, arms, legs).
1. Keep the basic filter on the device and place the magnetic large filter onto the top of
the device.
2.Place the device at a 90° degree angle against your body, keeping the treatment
window fully covered by your skin. When the skin sensor indicator ‘ ’ appears on the
display, press and hold the flash button whilst moving the device against your skin
around the desired areas you wish hair to be removed. Flashes will continuously emit
through the treatment window as long as the flash button is held down and the skin
sensor indicator ‘ ’ stays on the display.
3.To stop the flashing, release the flash button and take the device away from your
skin. The skin sensor indicator ‘ ’ should disappear.
Auto mode
This mode is recommended for larger areas (for example, arms, legs).
1. Keep the basic filter on the device and place the magnetic large filter onto the top of
the device.
2.Press and hold the flash button for 3 seconds to activate auto mode. The display will
then show the auto mode indicator ‘’. Release the flash button.
3.Place the device at a 90° degree angle against your body, keeping the treatment
window fully covered by your skin. When the skin sensor indicator ‘ ’ appears on the
display, the device will automatically start flashing through the treatment window.
Move the device against your skin around the area you wish hair to be removed.
4.Once finished, to stop the flashing, take the device away so the treatment window is
not touching your skin. Alternatively, press and hold the flash button for 3 seconds to
turn off auto mode.
Skin rejuvenation mode
This mode is recommended for the whole body.
1. Keep the basic filter on the device and place the magnetic large filter onto the top of
the device.
2.Double press the power button and the display will show ‘ ’, confirming the skin
rejuvenating mode is activated. In this mode the intensity level is pre-set to revive
collagen and rejuvenate skin.
3.To activate the treatment window and light, continue to follow the steps to either the
manual, continuous, or auto mode.

Recommended usage
The following table shows the recommended usage rate the device should be used and the
progression of hair loss over time.
Time frame Recommended usage Result
Weeks 1–4 2–3 times a week 75% hair will naturally fall out.
Weeks 5–6 Twice a week New hair growth will fall out and less hair
will grow out in general.
Weeks 7–8 Once a week Hair regrowth is further reduced.
Weeks 8+ Once a month Limited hair growth. Only use the device if
hair grows out.
After treatment care
•It is normal if there is a minor redness, warm, or stinging sensation immediately after
treatment and should disappear soon. Consult a doctor if these conditions do not go
away.
•Do not wet the treated area within 6 hours after treatment. After 6 hours, apply
moisturiser to the area.
•Do not wear perfume, masks, or cosmetics with microbeads within 6 hours after
treatment.
•Apply high SPF products if you are planning to go outside.
•Do not perform artificial tanning between treatments.
•Consult a doctor if you are planning to have plastic surgery done on the treated area.
Note:
The frequency of use depends on an individual’s hair growth rate. Everyone is different
and the results may vary.

•After use, ensure the device is powered off completely.
•Use a dry, dust-free cloth to clean the top of the treatment window where skin has
touched and the filter on the device.
•Store the device in a dry, dust-free place in an environment between -10°C–45°C with
a humidity of between 10–75%.
Problem Possible cause Solution
The device does not
turn on after pressing
and holding the
power button.
The AC adapter may not be
working.
Stop use immediately and
contact help.Kogan.com for
assistance.
The device is stuck in
an idle state and
cannot be used.
•The device may not be
receiving enough power
to function properly.
•The AC adapter may
not be working.
Stop use immediately and
contact help.Kogan.com for
assistance.
The device turns on
but is not flashing.
Check if the device is
overheated.
Turn off the device and wait for it
to cool down.
The treatment window is not
fully covered by skin.
Ensure the treatment window is
fully covering the skin, and the skin
sensor indicator appears on the
display.
The internal components of
the device may be damaged.
Stop use immediately and contact
help.Kogan.com for assistance.
CLEANING & CARE
Note:
Do not use water to clean the device.
TROUBLESHOOTING

The device has a
strange smell when
in use.
The hair in the hair follicle is
being heated.
This is a normal phenomenon and
should cause no concern.
Hair residue is on the device
and causing an odour.
Turn off the device and clean it
using a dry, dust-free cloth.
The AC adapter is
hot when in use.
The internal components of
the AC adapter
are generating
heat.
This is a normal phenomenon in
use and should cause no concern.
There is extreme
discomfort on the
skin while in use.
The intensity level is set too
high.
Lower the intensity level to an
optimal setting.
The magnetic filter on the
device may be damaged.
Stop use immediately and contact
help.Kogan.com for assistance.
Your skin type may not be
suitable for use with this
device.
Refer to the ‘Safety & Warnings’
section of this user guide for more
information. Stop use if necessary.
The surface of the skin may
not be clean
and the absorbed
heat is being transferred
directly to the epidermis of the
skin.
Before use, clean your skin’s
surface completely and remove
any dirt, oils, and other impurities.
The device does not
turn on when
plugged into power.
The power button has not
been pressed.
Press and hold the power button
for 3 seconds to turn on the
device.
Progress of results
are not satisfying.
Intensity level is set too low. Apply a higher intensity level.
Treatment sessions are too
short.
Flash repeatedly on unwanted
hair.
IPL cannot perform the best
on your hair colour.
If your hair colour is blonde, grey,
red or white, the treatment period
will be longer.
Interval between treatment
sessions is too long.
Use the device more frequently/
follow the recommended usage.
Treatment period has not
elapsed.
Apply the device for 8–20 or more
weeks to achieve the desired
results.

Size 155 x 60 x 34mm
Net weight 200g
Treatment window size 3.25cm²
Wavelength 530nm–1200nm
Input 12V
⎓
3.0A
Power 36W
Number of intensity levels available 5
Storage conditions Temperature: -10°C–45°C
Humidity: 10–75%
SPECIFICATIONS

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com