ETC Emphasis 4200A2009 User manual

ETC®Quick Guide
Emphasis®2006 Edition Server Rack Mount Setup Guide
Emphasis Server Rack Mount Setup Guide Page 1 of 2 Electronic Theatre Controls, Inc.
Corporate Headquarters  3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA  Tel [phone]  Fax [phone]
London, UK  Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK  Tel [phone]  Fax [phone]
Rome, IT  Via Ennio Quirino Visconti, 11, 00193 Rome, Italy  Tel [phone]  Fax [phone]
Holzkirchen, DE  Ohmstrasse 3, 83607 Holzkirchen, Germany  Tel [phone]  Fax [phone]
Hong Kong  Room 605-606, Tower III Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong  Tel [phone]  Fax [phone]
Service: (Americas) [e-mail]  (UK) [e-mail]  (DE) [e-mail]  (Asia) [e-mail]
Web: www.etcconnect.com  Copyright © 2005 ETC. All Rights Reserved.  Product information and specifications subject to change.
4200M2212  Rev A  Released 03/2006
This document illustrates the installation procedure for the Emphasis®2006 Edition Server Rack
Mount Kit (ETC Part # 4200A2009). This setup guide does not apply to Dell manufactured
Emphasis Servers.
Tools Required
• #2 Phillips (Cross-head) screwdriver
Setup Procedure
Remove screws and rubber
feet from bottom of server
1
**Procedure continued on next page**

ETC Quick Guide
Emphasis 2006 Edition Server Rack Mount Setup Guide
Emphasis Server Rack Mount Setup Guide Page 2 of 2 Electronic Theatre Controls, Inc.
Parts List
Kit # 4200A2009- Emphasis Server 2006 Edition Rack Mount Kit
Reference
Number ETC Part Number Description Quantity in kit
1 4200A3006 Emphasis Server Front Right Rack Mount Bracket 1
2 4200A3007 Emphasis Server Front Left Rack Mount Bracket 1
3 4200A3008 Emphasis Server Rear Right Rack Mount Bracket 1
4 4200A3009 Emphasis Server Rear Left Rack Mount Bracket 1
5 4200A3010 Emphasis Server Rear Rail Adapter, 3U 2
6 HW257 Screw 6-32 x 1/4” Phillips Under cut 8
7 HW206 Screw 6-32 x 3/8” Phillips 4
8 HW436 Clip 10-32 Spring 8
9 HW469 Washer, #10 .19x.44x.06 black, nylon 8
10 HW467 Screw 10-32 x 1/2” Phillips 8
11 HW4102 Screw 10-32 x 3/8” Phillips 4
2
8
2
7
9
10
6
5
4
11
3
5
1
8
Install into rack
before fastening
3
Install front mounting plates
as shown above.
If rack is equipped with rear
mounting rails, install rear
mounting plates as shown
below (optional).