LifeWorkEtc.com
800-634-9514
Part # 3330330, Rev. A
S
Adjust the monitor
with the supplied
5x5 Allen key (F).
Make sure
Please check and tighten all screws every two months to ensure proper use. This product was
designed to be installed on a desk. Before installing, make sure the mount will support the
combined load of the equipment and hardware. Never exceed the maximum load capacity of 9KG,
or else it may result in the failure of the product or personal injury.
This
Adjust the monitor's height after
installing. Using the 5x5 Allen key
adjust the screw in the "-"
Counterclockwise direction to
move Down and in the "+" Clockwise
direction to move Up.
, ,
, ,
STEP 02
STEP 03
H
GH
O
C
E
Q
I
J
S
N
R
Adjust the monitor
with the supplied
5x5 Allen key (F).
Make sure
Please check and tighten all screws every two months to ensure proper use. This product was
designed to be installed on a desk. Before installing, make sure the mount will support the
combined load of the equipment and hardware. Never exceed the maximum load capacity of 9KG,
or else it may result in the failure of the product or personal injury.
This
Adjust the monitor's height after
installing. Using the 5x5 Allen key
adjust the screw in the "-"
Counterclockwise direction to
move Down and in the "+" Clockwise
direction to move Up.
, ,
, ,
(GROMMET OPTION)
LIZANNE (SINGLE) A S S EM B LY
Keep the counterbore
side down
Desk Size of the hole:
8.5-70mm.
Desk
Tighten
Adjust the monitor
with the supplied
5x5 Allen key (G).
Adjust the monitor's height
after installing. Using the 5x5
Allen key adjust the screw in the
"-" counterclockwise direction
to move down and in the "+"
clockwise direction to move up.
Increase washer (E) based
on actual situation.
