EN 1413 EN
Frequency bands and power are as below:
Function Bands Operation Frequency Max.Power
Bluetooth 2.4GHz 2402-2480 MHz EIRP 9.24 dBm
Wi-Fi
2.4GHz 2412-2472MHz EIRP 19.97 dBm
5GHz
5150-5250MHz EIRP 18.45 dBm
5250-5350MHz EIRP 19.01 dBm
5470-5725MHz EIRP 16.74 dBm
5725-5850MHz EIRP 13.96 dBm
5150~5350 MHz can be used indoor only.
The following importer is the responsible party
(contract for EU matters):Anker Innovations Deutschland GmbH
I Georg-Muche-Strasse 3, 80807 Munich, Germany
The following importer is the responsible party (contract for UK
matters):
Anker Technology (UK) Limited I GNR8, 49 Clarendon Road,
Watford, Hertfordshire, WD17 1HP, United Kingdom
NOTICE
Declaration of Conformity
This product complies with the radio interference
requirements of the European Community.
Hereby, Anker Innovations Limited declares that this device is in
compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU. For the declaration of
conformity, visit the Web site: https://uk.eufylife.com/.
This product complies with the radio interference
requirements of the United Kingdom.
Hereby, Anker Innovations Limited declares that this
product is in compliance with Radio Equipment Regulations
2017(SI2017/1206). The full text of the UK declaration of
conformity is available at the following internet address:
https://uk.eufylife.com.
This adapter is for indoor use only. The adapter type is TEKA-
UCA20EU, rated output voltage/current is 5Vdc/2A. The plug
considered as disconnect device of adapter.
RF exposure information:
The Maximum Permissible Exposure (MPE) level has been
calculated based on a distance of d=20 cm between the device
and the human body. To maintain compliance with RF exposure
requirement, use product that maintain a 20cm distance
between the device and human body.
