EUFY T87A0 User manual

1 2 3 4 5
❸❹❺
❼❻
❶
❿❷❽❾
QUICK
START GUIDE
Home Security Display
1
OVERVIEW ❻❼❽❾❿❶❷❸❹❺Power PortMicro SD Card SlotScreen Control Button• Single press: Turn on / o󽗈 the screen.• Double press: Display multiple cameras (up to 4 camera feeds) on the screen.SOS ButtonFolding BracketTime of Flight Sensor / MicrophoneStatus Light• Flashing red slowly: Disconnected from the Internet.• Flashing red fast: An alarm is going o󽗈.Light SensorScreenSpeakerModel: T87A0You can place the display on a table or mount it on a wall.
2
MOUNTING Wall Mount
Option 1. 3M Sticker
❸❶❷UPDOWNUPDOWNOption 2. Expansion Screws
Use the provided cable holder if necessary. Fix the cable holder with the 3M sticker
on the back or an expansion screw.
❸❹❺
❼❻
❶
❿
❷❽❾

6 7 8
The adapter shall be installed near the equipment and shall be easily accessible. Do not use
the Device in the environment at too high or too low temperature, never expose the Device
under strong sunshine or too wet environment. The suitable temperature for the product and
accessories is 0°C to 40°C (32°F to 104°F).
When supplying, please place the device in an environment that has a normal room
temperature and good ventilation.
It is recommended to supply the device in an environment with a temperature that ranges
from 5°C~25°C.
Please ensure to use only the adapter offered by the manufacturer. Using unauthorized
adapter may cause danger and violate the authorization of the projecter and the guarantee
article.
This adapter is for indoor use only. The rated output voltage/current of the adapter is
5Vdc/2A. The plug considered as disconnect device of adapter.
Your product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
NOTICE (United States Of America)
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna. (2) Increase the separation between the
equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV
technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be
used in fixed/mobile exposure condition. The min separation distance is 20cm.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain
compliance with FCC regulations.
The following importer is the responsible party
Company Name: POWER MOBILE LIFE, LLC
Address: 10900 NE 8th St, Ste 501, Bellevue WA 98004
Telephone:[phone]
NOTICE (Canada)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device."
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement."
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
IC RF Statement:
When using the product, maintain a distance of 20cm from the body to ensure compliance
with RF exposure requirements.
Lors de l'utilisation du produit, maintenez une distance de 20 cm du corps afin de vous
conformer aux exigences en matière d'exposition RF.
CUSTOMER SERVICE
Warranty
12-month limited warranty
Call Us
United States
[phone] Mon-Fri 9AM-5PM (PT)
United Kingdom
[phone] Mon-Fri 6AM-11AM (GMT)
Germany
[phone] Mon-Fri 6:00-11:00
Email Us
[email protected]
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok,
Kowloon, Hong Kong
@EufyOfficial
@EufyOfficial
@EufyOfficial
Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are
trademarks of Anker Innovations Limited, registered in the United States and other
countries. All other trademarks are the property of their respective owners.
V01
1. Download and install the eufy Security app, then sign up for an account.
2. Power the display.
3. On the display, follow on-screen instructions to complete the setup.
3
SETUP
4
NOTICE