Eureka Maxima 4700D User manual

What’s in the carton
STEP
1
1
Easy assembly
Slide vacuum back onto base.
Fasten with one long screw.
Slide tool caddy onto back.
Fasten with two short screws.
Slide handle onto tool caddy.
Fasten with one long screw.
Attach hose to vacuum back.
Fasten with two short screws.
STEP
2
2
Get ready to vacuum
Step on power switch to turn
on; step on again to turn off.
Step on handle release to
lower handle into position.
Adjust height for
carpet or bare floor.
ush cord into top cord
retainer. lug into outlet.
For accessories: Loosen lower
end of hose and attach tool.
If vacuum is hard to push,
raise carpet setting.
Empty dust cup when debris
reaches line or after each use.
Some models: Use ower aw®
for furniture or stairs.
STEP
3
3
Use a phillips
screw driver.
PROBLEM SOLVING
R f r to Own r’s Guid .
MAINTENANCE SCHEDULE
R f r to back of dust cup or Own r’s Guid .
QUICK START GUIDE
4700 S ri s
B for r turning, call
Eur ka Custom r S rvic
HELPLINE
1-800-282-2886
8 a.m. to 7:30 p.m. (CST), Monday - Friday
10 a.m. to 6:30 p.m. (CST), Saturday - Sunday
www. ur ka.com
T
h
a
n
k
y
o
u
f
o
r
p
u
r
c
h
a
s
i
n
g
y
o
u
r
n
e
w
E
u
r
e
k
a
v
a
c
u
u
m
!
Attach hose retainer with one
short screw. ull retainer out
to position hose.
ull up cord and push into
lower cord retainer. Wrap cord.
lace hose over
hose hook on handle.
ush end of hose into
opening on vacuum base.
lace dust cup on base
and snap into place.
lace wand/crevice tool in
holder on side of vacuum.
lace dusting brush on
back of handle.
Some models: Snap
ower aw®into clip on front.
Vacuum Base Dust Cup
and Filter Handle
Important Safeguards
Dusting
Brush
Hose
Retainer
Vacuum
Back
Tool Caddy
2 Long and
5 Short Screws
Hose
Extension
Wand and
Crevice Tool
REGISTRATION
OWNER’S
GUIDE
Stair Hose
SPECIAL FEATURES
Available on some models
ower aw®
Handle
with
ower aw®
!
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.
Moving parts. Assemble the vacuum cleaner before using.
PN81156_Lights eedQS.qxd:front englsh 11/16/08 3:53 PM Page 1