Eurofred COOL PRO DS 9-24 KKD Series User manual

USER MANUAL
UM En
SPLIT MURAL
COOL PRO
Serie
COOL PRO DS 9-24 KKD
Edition
12/22
Models
DS-9KKD WIFI
DS-12KKD WIFI
DS-18KKD WIFI
DS-24KKD WIFI

-B-
Contents
Remote controller ...................................................................................................1
Operation instructions.............................................................................................3
Operation modes ................................................................................................3
Airow direction control.......................................................................................4
CLOCK button ....................................................................................................5
Timer mode.........................................................................................................5
SLEEP mode ......................................................................................................6
Turbo mode ........................................................................................................6
8ºC HEAT mode..................................................................................................7
LOCK function ....................................................................................................7
MUTE mode........................................................................................................8
ECO mode..........................................................................................................8
IFEEL function ....................................................................................................8

-1-
Remote controller
The remote controller transmits signals to the system.
ON/OFF BUTTON
The appliance will be started when it is energized or will be
stopped when it is in operation, if you press this button.
MODE BUTTON
Press this button to select the operation mode.
FAN BUTTON
Used to select fan speed in sequence auto, high, medium
or low.
ROOM TEMPERATURE SETTING BUTTONS
Used to adjust the room temperature and the timer, also
real time.
TURBO BUTTON
Used to start or stop the fast cooling. (Fast cooling operates
at high fan speed with 16oC set temp automatically.)
SWING BUTTON
Used to stop or start vertical adjustment louver swinging
and set the desired up/down airow direction.
SLEEP BUTTON
Used to set or cancel Sleep Mode operation.
LIGHT BUTTON
When you press this button, all the display of
indoor unit will be closed.
CLOCK BUTTON
Used to set the current time.
TIMER ON/OFF BUTTON
Used to set or cancel the timer operation.
ECO BUTTON
Used to set or cancel Economy Mode operation.
8ºC HEAT
Press them together for 3 seconds to start or
stop 8ºC HEAT mode.
MUTE BUTTON
Press it once, the MUTE function will be started.
Press it again, the MUTE function will be shut
off. Use to set CLEAN mode operation.
IFEEL BUTTON
Used to set IFEEL mode operation. Press it
once, the IFEEL function will be started. Press it
again, the IFEEL function will be shut off.
If the IFEEL function can’t be shut off, please try
to press this button about 5 seconds.
Advice to put the remote controller in the place
where the indoor unit receive signal easily.
Advice to cancel the IFEEL mode so as to save
energy when stopping the air conditioner.
LOCK
Press them together for 3 seconds to start or
stop LOCK operation.
Indication symbols on LCD:
Cooling indicator Auto fan speed Smart indicator Signal transmit
Dry indicator High fan speed Sleep indicator Display set timer
Display current time
Fan only indicator Medium fan speed 8ºC Heating indicator Display temperature
Heating indicator Low fan speed Economy indicator Lock
Turbo indicator Mute indicator Ifeel
Airow up and down indicator
Note: Each mode and relevant function will be further specied in following pages.
Remote controller

-2-
Remote controller
• How to Insert the Batteries
Remove the battery cover according to the arrow direction.
Insert new batteries making sure that the (+) and (-) of battery
are matched correctly.
Reattach the cover by sliding it back into position.
Note:
• Use 2 LR03 AAA (1.5volt) batteries. Do not use rechargeable batteries.
Replace batteries with new ones of the same type when the display
becomes dim.
• Storage and Tips for Using the Remote Controller
The remote controller may be stored mounted on a wall with a holder.
Note: The remote controller holder is an optional part.
• How to Use
To operate the room air conditioner, aim the remote controller
to the signal receptor. The remote controller will operate the air
conditioner at a distance of up to 7m when pointing at signal
receptor of indoor unit.
CAUTIONS
For appropriate signal transmission between remote controller
and indoor unit, keep the signal receiver away from the following
items:
• Direct sunlight or other strong lights or heat
• Flat panel television screen or other electrical appliances that
react to the remote controller
Additionally, the air conditioner will not operate if curtains, doors
or other materials block the signals from the remote controller to the
indoor unit. If the signal may not be transmitted properly, either move
these materials or consult your local dealer.
signal receptor
Remote controller

-3-
Operation modes
Selecting mode
Each time the "MODE" button is pressed, the operation
mode is changed in sequence:
Heating mode is NOT available for cooling only air conditioner.
FAN mode
Each time the "FAN" button is pressed, the fan speed is
changed in sequence:
At "FAN ONLY" mode, only "Higher",”High”,"Medium""Low" and ”Lower” are
available. At "DRY" mode, Fan speed is set at "Auto" automatically, "FAN" button
is ineffective in this case.
Setting temperature
“” Press once to raise temperature setting by 1ºC
“” Press once to lower temperature setting by 1ºC
Range of available set temperature
*HEATING, COOLING 16ºC-30ºC
Note: Heating mode is NOT available for cooling only models.
Note: Press and hold “ ” button and “ ” button together for 3
seconds will alternate the temperature display together for 3 seconds will
alternate the temperature display between the ºC and °F scale.
Turning on
Press ON/OFF button, when the appliance receives the
signal, the RUN indicator of the indoor unit lights up.
SWING, SMART, TIMER ON, TIMER OFF, CLOCK, SLEEP, will be specied in the following pages.
• Changing modes during operation, sometimes the unit does not response at once. Wait 3 minutes.
• During heating operation, air ow is not discharged at the beginning. After 2-5 minutes, the air ow will be discharged until
temperature of indoor heat exchanger rises.
• Wait 3 minutes before restarting the appliance.
Operation instructions

-4-
Airow direction control
Airow direction control
Vertical airow (Horizontal airow) is automatically adjusted to a certain
angle in accordance with the operation mode after turning on the unit.
Operation mode Direction of airow The direction of airow can
be also adjusted to your own
requirement by pressing the
"SWING" button of the remote
controller.
COOLING, DRY horizontal
*HEATING, FAN
ONLY
downward
*Heating mode is only available for heat pump models.
Vertical airow control (with the remote controller)
Using remote controller to set various angles of ow or specic angle as
you like.
Swinging airow
Pressing button once, the vertical adjustment louver will swing up
and down automatically.
Desired direction airow
Pressing the button again when the louvers swing to a suitable angle
as desired.
Do not turn the vertical adjustment louvers manually, otherwise malfunction may occur. If that happens, turn off the
unit rst and cut off the power supply, then restore power supply again.
It is better not to let the vertical adjustment louver tilt downward for a long time at COOLING or DRY mode to prevent
condensed water from dripping.
Operation instructions

-5-
CLOCK button
You can adjust the real time by pressing CLOCK button,
then using “ ” and “ ” buttons to get the correct time,
press CLOCK button again the real time is set.
Timer mode
It is convenient to set the timer on with TIMER ON button when you go out in the morning to
achieve a comfortable room temperature at the time you get home. You can also set timer
off at night to enjoy a good sleep.
How to set TIMER ON
TIMER ON button can be used to set the timer programming as wished in order to switch on
the appliance at your desired time.
i) Press TIMER ON button, "ON 12:00" ashes on the LCD, then you can press the “ ” or “
” buttons to select your desired time for appliance on.
Increase
Decrease
Press the “ ” or “ ” button once to increase or decrease the time setting by 1 minute.
Press the “ ” or “ ” button 2 seconds to increase or decrease the time setting by 10
minutes.
Press the “ ” or “ ” button for a longer time to increase or decrease the time by 1 hour.
Note: If you don't set the time in 10 seconds after you press TIMER ON button, the remote controller
will exit the TIMER ON mode automatically.
ii) When your desired time displayed on LCD, press the TIMER ON button and conrm it.
"ON" stops ashing.
The TIMER indicator on the indoor unit lights up.
iii) After the set timer displayed for 5 seconds the clock will be displayed on the LCD of the
remote controller instead of set timer.
How to cancel TIMER ON
Press the TIMER ON button again, the indicator disappears, the TIMER ON mode has been
canceled.
Note: It is similar to set TIMER OFF, you can make the appliance switch off automatically at your
desired time.
Operation instructions

-6-
SLEEP mode
SLEEP mode
SLEEP mode can be set in COOLING, HEATING or DRYING operation
mode.
This function gives you a more comfortable environment for sleep.
In SLEEP mode,
▪ The appliance will stop operation automatically after operating for 8 hours.
▪ Fan speed is automatically set at low speed.
▪ *Set temperature will rise by 1ºC at most if the appliance operates in cooling
mode for 1 hour constantly, then keeps steady.
▪ Set temperature will decrease by 3ºC at most if the appliance operates in
heating mode for 3 hours constantly, then keeps steady.
For some models, such as G1Q series
▪ *Set temperature will rise by 2ºC at most if the appliance operates in cooling
mode for 2 hour constantly, then keeps steady.
▪ Set temperature will decrease by 2ºC at most if the appliance operates in
heating mode for 2 hours constantly, then keeps steady.
*Note: In cooling mode, if room temperature is 26ºC or above, set temperature will not
change.
Note: Heating is NOT available for cooling only air conditioner.
Note: Press TURBO, ON/OFF, FAN, MODE, ECO or SLEEP button cancel SLEEP mode.
Turbo mode
TURBO mode
TURBO mode is used to start or stop fast cooling when the unit is on.
TURBO mode can be set when the appliance is in operation or energized.
In TURBO mode, you can set airow direction or timer.
How to set TURBO mode?
Press TURBO button at the cooling, fan only or dry
mode.
Result: At high fan speed, the set temperature
automatically to 16ºC.
Press TURBO button at the heating mode.
Result: At AUTO fan speed, the set temperature
automatically to 30ºC.
How to cancel TURBO mode?
Press TURBO, MODE, FAN, ON/OFF, SLEEP, TURBO or MUTE
button.
Result: The display return to the original mode.
Escape from TURBO mode.
Cancel
Operation instructions

-7-
8ºC HEAT mode
8ºC HEAT mode
In HEATING mode, Press and buttons together for 3 seconds to start 8ºC HEAT mode.
In 8°C HEAT mode, the fan speed is set at “AUTO” automatically. The icon will appear on the
LCD.
If pressing any button, other than ON TIMER, OFF TIMER, DIMMER, IFEEL and SWING, 8°C HEAT
function will be turned off. And the icon will disappear.
Note:
In 8°C HEAT mode, the default temperature is set 8ºC.
8°C HEAT mode can be set only when the air conditioner works in HEATING mode.
Only for models with 8°C HEAT function.
Press together
for 3 seconds
LOCK function
LOCK function
▪TIME ON and TIME OFF buttons together for 3 seconds to start LOCK function.
The icon will appears on the LCD.
▪TIME ON and TIME OFF buttons together for 3 seconds again to stop LOCK function.
The icon will disappeared from the LCD
Press together for
3 seconds
Operation instructions

-8-
MUTE mode
MUTE mode
In this mode, the air conditioner will work with low noise performance.
In this mode, you can start the SLEEP mode at the same time.
Note:
* MUTE button is only available in COOLING, HEATING and FAN ONLY mode.
* Press MODE, FAN SPEED, SMART or SUPER button to cancel MUTE mode.
ECO mode
ECO mode
In this mode, the air conditioner will bring you energy saving performance by lower running currency.
Note:
* ECONOMY button is ineffective in SMART and SUPER mode.
* SMART and SUPER buttons are not available in ECONOMY mode.
* Press ON/OFF, MODE, TEMP ±, FAN SPEED, SLEEP, QUIET or ECONOMY button to cancel
ECONOMY mode.
IFEEL function
IFEEL function
The temperature sensor built in remote controller is activated. It can sense its surrounding
temperature, and transmit the signal back the unit, the unit can adjust the temperature so as to
provide maximum comfort.
Note:
Advice to put the remote controller in the place where the indoor unit receive signal easily.
Advice to cancel the IFEEL mode so as to save energy when stopping the air conditioner.
Operation instructions

-9-
QR Code for Android QR Code for iOS
Open Android Play Store or IOS App
Store in your smart phone, then enter
“ ” in the Search bar to
find the latest version. Download and
install it.
ConnectLife
ConnectLife

-10-
Eurofred S.A.
Marqués de Sentmenat 97
08029 Barcelona
www.eurofred.es