Euronics EH21 Technical manual

Warning
1.Itisforbiddentouseyourhandsotothermattertoblockupthespout,oruse
extensionmatterlikeironwiretoinserttheinthespout.
2.Itisforbiddentouseyourhandsotothermattertoblockupthespout,oruse
extensionmatterlikeironwiretoinserttheinthespout.
3.Donotdecompose, repairoranyalteration of this machinewithout authorization,or
putburningcigaretteonthebody,otherwisethereisarisk of electric shock, fireand
other accidents.
4.If the power software cord is damaged,itshouldbereplacedwith specialized
software or buy components from factories or dedicatedmaintenance.
Maintenance
terms of guarantee
1, Please cut off the power and clean the shell with natural detergent when it is dirty.
The acid and alkalescent bathroom detergent and BEN, lacquer thinner, abrasive etc
are forbidden. Besides, do not use nylon brush such friction tool clean it avoiding be
scratched.
2, When cleaning the shell prevent the water droplets into the machine, so as to avoid
electric shock or short circuit;
3, It's better to cut off the power when off duty, to extend the service life;
4, If the power software cord is damaged, it should be replaced with specialized
software or buy components from factories or dedicated maintenance.
5,If the machine breaks down, cut off the power quickly and stop work., please
commission the professional to repair it.;
6,If long time no use of this machine, please cut off the power, and store it in clean and
dry indoors with sealed after cleaning.
1, The product warranty period is one year.
2,The service within warranty period for products, which came into effect from the date
of buying the machine.
3,Within one year after purchasing, consumers findthemachinefailurecausedbythe
productitselfreason,thentheycangotothepurchasingplacetomaintenanceand
replacethemachineforfreewithoriginalinvoicesandcompletedandthequality
assurancecardstampedbydealers.
4, The following are not in the scope of free maintenance:
Improper use and the fault caused by demolition, alteration and repair by technical
persons without our company authorization.
Fires, earthquakes, thunder and other natural disasters cause faults,andabnormal
voltage causes the faults.
The faults caused by non matching power.
The faults caused by long time operation in bad working condition.
Not quality assurance card or the cards is flit not explicitly or correctly.
5, Over warranty period or it is not free maintained products, while our company
remains committed to serving.
Operationinstruction
Contents
FeaturesAndTechnicalparameters........1
Notebeforeinstallaton..............................1
MethodofInstallation................................2
Methodofusage.........................................2
Warning.......................................................3
Maintenance...............................................3
terms of guarantee.....................................3
Dear customer:
Thanks for your purchase of my company's
products. Please read this instruction before
installation and keep it for installation and
usage or any other further reference.
3
Hi Speed Hand Dryer
Code:EH21

1.Itisequippedwithautomaticinfrared ray induction system,veryeasytouse,reducing
waste,andnotouchingcleanhandswhicheffectively to avoidingpathogencross
infection and recontamination.
2.Ithasoutstandingperformancewithmostadvantagechipcontroltechnologyand
infraredsensor.
3.IthasunifiedhighspeedmotorwithRPMof24000,dryersthehandswith7-12seconds;
4.This series productisallwithover current protection, which effectively eliminates
accidents.
5.Itonlyneedsexpansion pipeandscrew hookwheninstallation,then hang the machine,
cut off the powerwhen maintenance.Itissuitableforall departmentsinhospitals,school,
food and pharmaceutical manufacturers, airports, office buildings, hotels, government
agencies and research institutions and other places.
Features And Technical parameters
Note before installaton
1.Do not fix it in the place with water or water vapor in surface, do not install in the
bathroom which with heavy moisture, in order to avoid electric shock.
2.You must commission professional electrician to install power lines, or else it has
electric shock hazard.
3.You must cut off power before operation and ensure the protection no power.
4.The machine must be installed in clean indoor. Please use power: 220V-240V,
50/60Hz.
5.Requests to install leakage circuit breakers or protection against fire hazards,
6.Do not decompose, repair or any alteration of this machine without authorization,
otherwise there is a risk of electric shock, fire and other accidents.
1.Toensurethatnootherthingsintheoutletaround400mm.Meanwhile,donotinstall
itabovethestainlesssteelorartificialmarblesuchshiningsurfacelocation,otherwise
pronetomisoperation.
2.Thebody should be firmly fixed to the smooth wall to avoid injuries caused by the decline
of product or product damage.
3.Do not install theproductsin suchplacewithcorrosive or flammable gases or objects,
it may cause fire or product failure and malfunction.
4.Do not installtheproductsinsuchenvironment withmulti dust orinhigh temperature,
it maycauseproductdamage.
Method of Installation
1.Usethehexagon wrenchintheattachmenttopulloutthescrewsatthetwosides,and
thetakeoffthethepanel.(PICTURE1)
2.Drillholeonthewallaccordingtodimensional drawing,andputtheexpansion pipein
thehole.Wesuggestthattakeoffthemachinebodywhenyouhavemarkedthe
positionandthendrillthehole.
3.Usethefourscrewsintheattachmenttofixtheproductonthewall.(PICTURE2)
4.Coverthepanel,andfixthecoverthescrewswithhexagon wrench,pluginthepower
anditwillworking.(PICTURE3)
Method of usage
Whentheinstallationisfinished,pluginthepower,themachinewillbeinstandby
mode.Putyourhandsundertheoutletwithdistanceof10cm,themachinewillwork
automatically.Warmairwillcomeoutanddryingthehands,Whenyoutakealwaythe
hands,themachinewillstopworkingautomaticallyin2seconds.Alsowhenthe
machineworkedfor60secondscontinually,itwillstopworkingautomatically.Ifyou
wantthemachineworkingagain,youneedtosensingitagain.
241
257.5
≈1300mm
Attention
Warning
Rated Voltage
Rated Frequency
RatedPower
WindSpeed
Sensing Distance
Waterproof Grade
12±3cm
IPX1
Ambient
Temperature
Motor power
Installation Wall Mounting
Way Of Heating
Drying Time 7-12S
80m/s
Overall size
AC220-240V
50/60HZ
1400W
0-40℃
600W
heating wire 320×290×170
1 2
(PICTURE1) (PICTURE2) (PICTURE3)
Body
bodymountingholes
Mountingholes
Airoutlet
Reaction
system
Airinlet
packing list
Body:1pcs
Screw:4pcs
Expansion pipe:4pcs
Hex wrench:1pcs
instruction:1pcs
Warrantycard:1pcs
Installation method
Table of contents
Other Euronics Dryer manuals
Popular Dryer manuals by other brands

Oursson
Oursson DH2200D instruction manual

LG
LG DLGX4271 Series owner's manual

Whirlpool
Whirlpool Personal Valet PVBM600LY0 user manual

KitchenAid
KitchenAid KEHS01P Use and care guide

GE
GE DVLR223EG Dimensions and installation information

Frigidaire
Frigidaire AEQ6700FE - AffinityTM 5.8 Cu. Ft. Dryera installation instructions

Kenmore
Kenmore 970L8802 Series Use & care guide

Siemens
Siemens WT45N202GB Installation and operating instructions

Electrolux
Electrolux IQ-TOUCH EIMED55I RR/MB/IW Specifications

Dexter Laundry
Dexter Laundry T-50X2 Troubleshooting, Fault Codes, And Schematics

LG
LG DLE0442W owner's manual

Amana
Amana NGD5700B instructions