Euronics EH270N User manual

EH270N
Automatic Hand Dryer
User Manual & Instruction

TERMS OF GUARANTEE
MAINTENANCE
Please cut off the power and clean the shell with natural detergent when
it is dirty. The acid and alkalescent bathroom detergent and BEN, lacquer
thinner, abrasive etc are forbidden. Besides, do not use nylon brush such
friction tool clean it avoiding be scratched
When cleaning the shell prevent the water droplets into the machine, so
as to avoid electric shock or short circuit
It's better to cut off the power when off duty, to extend the service life;
If the power software cord is damaged, it should be replaced with
specialized software or buy components from factories or dedicated
maintenance.
If the machine breaks down, cut off the power quickly and stop work.
please commission the professional to repair It.
If long time no use of this machine, please cut off the power, and store it
in clean and dry indoors with sealed after cleaning.
The product warranty period is one year.
The service within warranty period for products, which came into effect
from the date of buying the machine.
Within one year after purchasing, consumers find the machine failure
caused by the product Itself reason, then they can go to the purchasing
place to maintenance and replace the machine for free with original
invoices and completed and the quality assurance card stamped by
dealers.

REPLACE FILTER
Over warranty period or it is not free maintained products, while our
company remains committed to serving.
The faults caused by non matching power.
Improper use and the fault caused by demolition, alteration and repair
by technical persons without our company authorization.
Fires, earthquakes, thunder and other natural disasters cause faults,
and abnormal voltage causes the faults.
The faults caused by long time operation In bad working condition.
Not quality assurance card or the cards Is flit not explicitly or correctly.
The following are not in the scope of free maintenance:
-
-
-
-
-
Replace the fllter:
Attention:please replace the filter every 3-6 months to keep it efficient
How to replace the filter:
2. Replace with new filter
1. Press the filter window to take off the filter.
3. Close and lock the window
ATTENTION

NOTE BEFORE INSTALLATION
To ensure that no other things in the outlet around 400mm. Meanwhile,
do not install it above the stainless steel or artificial marble such shining
surface location, otherwise prone to misoperation.
The body should be firmly fixed to the smooth wall to ovoid injuries
caused by the decline of product or product damage
Do not install the products In such place with corrosive or flammable
gases or objects, it may cause fire or product failure and malfunction
Do not install the products in such environment with multi dust or in
high temperature, it may cause product damage.
ATTENTION
WARNING
Do not fix It In the place with water or water vapor in surface, not Install
in the bathroom which with heavy moisture, in order to avoid electric
shock.
You must commission professional electrician to install power lines,
or else it has electric shock hazard.
You must cut off power before operation and ensure the protection no
power.
Requests to install leakage circuit breakers or protection against fire
hazards
Do not decompose, repair or any alteration of this machine without
authorization, otherwise there is a risk of electric shock, fire and other
accidents;

COMPONENTS NAME
METHOD OF INSTALLATION
1
151mm
Electrical supply
entry hole
Ground
1250mm
242.8mm
2 3
Body
Reaction
system
Air mouth

FEATURES
It is equipped with automatic infrared ray induction system, very easy to
use, reducing waste, and no touching clean hands which effectively to
avoiding pathogen cross infection and re-contamination.
This series product is all with over current protection, which effectively
eliminates accidents.
It has high speed motor to dry the hands with 10 seconds.
It only needs expansion pipe and screw hook when install-ation, then
hang the machine, cut off the power when maintenance. It is suitable for
all departments in hospitals, school, food and pharmaceutical
manufacturers, airports, office buildings, hotels, government agencies
and research institutions and other places.
It has outstanding performance with most advantage chip control
technology and infrared sensor.
Waterproof Grade IPX3
Wind Speed
Noise Level
Drying Time
Overall Size
100m/s
72db
7-9S
183x275x162mm
Rated voltage AC220-240V
AC110-120V
Rated Frequency
Rated Power
Temperature
Installation
50/60HZ
1000W
50° C
Wall Mounting
TECHNICAL PARAMETERS