Euroseats 14.WVH.001 User manual

Max15Kg12Max2Kg12112123ABx4x2Item No.：14.WVH.001Installation guideKeyboard tray load-bearing:Max:2KGHeight range: 170-430mmMax:15KGDesktop load-bearing: Technical DataNo.Spare partQty.Accessory Package List Note: The drawings below are only for reference and may be slightly different with the object, please in kind prevail. Any tool missing or installation problem, please contact the customer service freely.Main structure Keyboard trayStickerNo.Spare partQty.No.Spare partPut the product on the deskASSEMBLY STEP 1ASSEMBLY STEP 2Bracket will bounce promptly when the handle is pressedCaution!Please assemble or disassemble the tray based on the actual usage. ASSEMBLY STEP 3Install the keyboard tray in the main structure Open the grips both sidesInstall the keyboard trayTighten the handles both sides
OpenTighten
Grips

ABASSEMBLY STEP 4To operate the workstation, press the handle and raise or lower the top to desired heightPlease place the devices onto the top of workstation.Please make sure all installed equipments are on the table, and not sticking out of the edge, or it may harm or cause damage.Attention Adjusting method: move the adjustment block, adjust the tray angleAttention Please note :The desk should be bigger than the base of this product ,to prevent any damage or personal injury caused by falling of this product while it up and down.Sticker A Sticker B Attach the sticker to the bottom of monitorThe sticker B can be cut as you wishNoteThe stickers can be reused by clean waterPlease make sure all installed equipments are on the table, and not sticking out of the edge, or it may harm or cause damage. Please leave enough length of cable for height adjustment function, otherwise itmay cause unexpected lost.Please press the grips to give the desktop downward force when you need to adjust the height while the object on the table is less than 3kg, in order to prevent the tabletop bouncing promptly and any property loss or personal injury.This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children. Make sure these instructions are read and completely understood before attempting installation. If you are unsure of any part of this installation, please contact a professional installer for assistance. Safety gear and proper tools must be used. A minimum of two people are required for this installation. Failure to use safety gear can result in property damage, serious injury or death. Please check joint parts every two months, making sure the screws are loosened or not.Note: this product is intended for indoor use only. Use of this product outdoors could lead to product failure or personal injury.Attention Attention CablesPressWarning Warning Warning Please do not put hands near the supporting bars, as they change during adjusting and may hurt you.