Eurostand Display EUROtower square User manual

Black PANTONE 201 C
EUROtower square
instruction manual
[p]art of perfect presentation
www.eurostand.com

Black PANTONE 201 C
TOWER SQUARE
- 1 - - 2 -
– Remove the structure from the packa-
ging and place it on the oor, so that
the hubs with three magnets are on
the top.
– Hold the structure by the tubes above
the hubs marked in the picture.
– Lift the structure, so that the marked
hubs are pointing towards you, and ex-
pand to its full size.
– Place the erected structure on the oor.
– It is advisable to allow the graphic
panels to lie at for about 30 min.
before placing onto the structure.
– The graphic panels are attached by
hanging the magnetic hanger onto
the magnets in the top row of hubs
Please note:
– A top desk is available for EUROtowers
1 and 2. It is to be placed onto the
metal rods on the top of the tower.
– To provide the maximum stability with
EUROtower square 1 and 2 we recom-
mend using the reinforcement bars.
– Please note that, when using the top
desk it is necessary to use the rein-
forcement bars. The reinforcement
bar should be attached to the special
inserts in the diagonal hubs using the
screws provided.
– To attach the lights use the square con-
nector for lights.
– Unwrap the magnetic bars and attach
them to the magnets in the hubs.
– The structure is ready for installing
the graphics.
Never slide the magnetic bars on top
of each other, it would damage the
magnetic eld!!!
packaging
1. Flight bag for graphic panels.
2. Transport bag, square.
3. Transport bag for magnetic bars.
– Max. load of table: 10 kg
Notice:
For interior use only!
10 kg
10 kg
3.
1.
2.
Graphic panels can be cleaned using
water and detergent; laminated
panels can also be cleaned with an
alcohol-based cleaner.
Always roll up the graphic panels
with the print on the outside!