Evergreen Great Grand Daddy User manual

INSTRUCTIONS
Rev. 04/07
LIST OF PARTS & HARDWARE
White-painted metal parts:
1 Side Left (SL) - includes hinged shelf
1 Side Right (SR)
1 Upper Frame (UF)
1 Shelf Grid (SG)
3 Cross Bars (CB) - one with
printed Evergreen name
1 Windsock Pole (WP)
Additional Hardware:
12 small bolts (each with
washer)
1 medium bolt (each with
washer)
2 large bolts (each with
wingnut and 2 washers)
1 small screwdriver
Merchandising hooks
and brackets:
30 garden flag hooks
30 regular flag hooks
20 6" hooks
2 E-brackets
3 C-brackets
4 D-brackets
1 Windsock Attachment
“Great Grand Daddy”
Metal Flag Display (05096)
WINDSOCK
POLE
(WP)
WINDSOCK ATTACHMENT
UPPER FRAME (UF)
SIDE RIGHT (SR)
SIDE LEFT (SL)
CROSS BAR (CB)
SHELF GRID (SG)REGULAR
FLAG HOOK
GARDEN
FLAG HOOK
C-BRACKETE-BRACKETD-BRACKET6” HOOK
4 Wheel
WHEEL
“T” SHAPE SUPPORT
1 “T” Shape Support

Page 2
Instructions for “Great Grand Daddy” metal flag display (05096)
5. Install the Shelf Grid at the bottom of the
display. (Fig. F)
6. Install C-Brackets on the right side of the
display. Install the E-Bracket on the left side of
the display. Install the D-Brackets on the back of
the display.
Rev. 04/07
1. Remove everything from packaging and verify
that all parts are present.
2.
4. Place the Upper Frame (UF) onto the
assembled Bottom Frame (Fig. C). Secure with
screws on the sides of the display (Fig. D) and
screw them together from the inside of the
display (Fig. E).
ASSEMBLY INSTRUCTIONS
Fig. C
Fig. D
Fig. E
Fig. F
Fig. A
Secure Side
Install wheels
at the bottom
of side left and
side right.
Left (SL) to
Side Right (SR)
with screws.
(Fig.A)
Flip over the
side panel from
side left (SL),
Place “T” shape
support secure
with two screws
in the side of
side left (SL).
3. Install cross bars in the middle of the bottom
frame. Secure by screws.Install the cross bar with
“Evergreen Enterprises” at the bottom of the
display.(Fig.B)
Fig. B

Page 3
Instructions for “Great Grand Daddy” metal flag display (05096)
Rev. 04/07
ASSEMBLY INSTRUCTIONS (CONT’D).
7. Slide 6” Hooks onto the front cross bar of
the display (Fig. G).
8. Hook garden flag hooks on the back side of
the cross bar. Hook regular flag hooks onto the
top of the display’s cross bar (Fig. H).
Fig. G
Fig. H
9. Slide the windsock attachment on windsock
pole (WP) over the bop of the bar in the side
frame. Line up the hole in the top bracket with
the hole in the top of the frame. Secure the
pole by using a medium bolt (with washer and
wingnut) through the hole in the uppermost
bracket of the windsock pole. (Fig. I).
Assembly is now complete and ready to fill with
Evergreen product.
Fig. I