Evergreen Junior User manual

INSTRUCTIONS“Junior” Metal Flag Display (05092)
Rev. 04/07
NECESSARY TOOLS
•Screwdriver
•Small step ladder or step stool (useful
to reach the top of the display)
LIST OF PARTS & HARDWARE
White-painted metal parts:
1 Side Left (SL) - includes hinged shelf
1 Side Right (SR)
1 Upper Frame (UF)
1 Shelf Grid (SG)
3 Cross Bars (CB) - one with
printed Evergreen name
4 Wheel
1 “T” Shape Support
Additional Hardware:
18 small bolts
18 washers
2 large bolts (each with a wingnut
and 2 washers)
Merchandising hooks and brackets:
20 garden flag hooks
20 regular flag hooks
20 6" hooks
2 E-brackets
2 C-brackets
4 D-brackets
UPPER FRAME (UF)
SIDE RIGHT (SR)
SIDE LEFT (SL)
CROSS BAR (CB)
SHELF GRID (SG)WHEEL
“T” SHAPE SUPPORT
REGULAR
FLAG HOOK
GARDEN
FLAG HOOK
C-BRACKETE-BRACKETD-BRACKET6” HOOK

5. Install the Shelf Grid at the bottom of the
display. (Fig. F)
6. Install C-Brackets on the right side of the
display. Install the E-Bracket on the left side of
the display. Install the D-Brackets on the back of
the display.
Page 2
Instructions for “Junior” metal flag display (05092)
Rev. 04/07
1. Remove everything from packaging and verify
that all parts are present.
2.
Secure Side
Install wheels
at the bottom
of side left and
side right.
Left (SL) to
Side Right (SR)
with screws.
(Fig.A)
4. Place the Upper Frame (UF) onto the
assembled Bottom Frame (Fig. C). Secure with
screws on the sides of the display (Fig. D) and
screw them together from the inside of the
display (Fig. E).
Fig. A
Fig. B
ASSEMBLY INSTRUCTIONS
Fig. C
Fig. D
Fig. E
Fig. F
Flip over the
side panel from
side left (SL),
Place “T” shape
support secure
with two screws
in the side of
side left (SL).
3. Install cross bars in the middle of the bottom
frame. Secure by screws. Install the cross bar with
“Evergreen Enterprises” at the bottom of the
display. (Fig. B)

Page 3
Instructions for “Junior” metal flag display (05092)
Rev. 04/07
ASSEMBLY INSTRUCTIONS (CONT’D).
7. Slide 6” Hooks onto the front cross bar of
the display (Fig. G).
8. Hook garden flag hooks on the back side of
the cross bar. Hook regular flag hooks onto the
top of the display’s cross bar (Fig. H).
Fig. G
Fig. H
Fig. I
9. Assembly is now complete (Fig. I).