Evo EVOHD-FBDN User manual

HD-TVI
Camera
User Manual
EVOHD-FBDN S54200
EVOHD-IDIRDN-3.6 S54201
EVOHD-IDIRDN-2.812 S54202
EVOHD-VDIRDN-2.812 S54203
EVOHD-BIRDN-2.812 S54204
EVOHD-BIRDN-3.6 S54205

CAMERA INSTALLATION
- 1 -
1. EVOHD-FBDN

CAMERA INSTALLATION
- 2 -
2. EVOHD-IDIRDN-3.6

CAMERA INSTALLATION
- 3 -
3. EVOHD-IDIRDN-2.812

CAMERA INSTALLATION
- 4 -
4. EVOHD-VDIRDN-2.812

CAMERA INSTALLATION
- 5 -
5. EVOHD-BIRDN-3.6

CAMERA INSTALLATION
- 6 -
6. EVOHD-BIRDN-2.812

- 7 -
#09$".&3"*/45"--"5*0/(6*%&
$"#-&*/45"--"5*0/(6*%&
1. Power : If camera power is on properly, red signal is turn on.
2. Video : Analog Video Signal Output
3. TVI : HD-TVI Signal Output
4. Power : Connect DC 12V Properly
5. RS-485 : Use RS-485 Protocol
6. Day & Night : Select Day & Night Function by External Signal
7. Motion Detection : Motion Detection Output
Black Video Cable : HD-TVI Video Output
Yellow Video Cable : Analog Video Output
Red Cable : Power Input (DC 12V)

- 8 -
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
This installation should be made by a qualified service person and
should conform to all local codes.
CAUTION : To prevent electric shock and risk of fire hazards:
ōDo NOT use power sources other than those specified.
ōDo NOT expose this appliance to rain or moisture.
6\PERO 3XEOLFDWLRQ
IEC60417, No.5031 'LUHFW&XUUHQW
'HVFULSWLRQ

- 9 -
&RQWHQWV
30
36
Specifications
Trouble Shooting
Menu Set Up
倝Set Up Menu
倝Menu Set Up
倝Lens
倝Exposure
倝 White Bal
倝Backlight
倝DNR
倝 Day&Night
倝Image
倝Motion
倝System
倝Exit
13
16
17
18
19
21
23
23
25
27
28
29
Contents 9
10
General Features
11
Precautions
12
Safety Instructions
13

- 10 -
(FOFSBM'FBUVSFT
Ǹ
Transfer Video Interface
The combination of a 2Mega CMOS image sensor and TVI DSP provides an excellent resolution
of TVI picture.
Ǹ
3D-DNR
Smart 3DNR prevents the image blurring of moving object and activates only if moving objects
are appearing on the scene.
Ǹ
Smart-IR
No saturation image, vivid image in darkness! "TVI" camera makes very sharp video image in
darkness! This technology eliminates saturation of video image of the closer object in darkness
by control of the IR sensitivity. Saturation never happens in our "TVI"cameras, you can enjoy
vivid image in any dark condition!
Ǹ
Sens-Up
Despite a limited & low light condition, Sens-Up - Max. x32 helps the viewer to get visible and
clear images.
Ǹ
Defog
Defog
function improve the clarity of images taken in poor conditions such as fog, smoke, rain
or snow.
Ǹ
WDR
A powerful and advanced technology that captures clean and superior high
resolution picture even where images appear dark and strong back light.
Ǹ
CVBS(Composite Video Blanking and Sync)
TV system is switchable 'NTSC' or 'PAL' with built-in OSD.
Ǹ
Intelligent Function
An extra ordinary technology enables HD-TVI become an ultimate and of solution
by providing intelligent features based on motion detection. It strengthens crime
prevention and detection.

- 11 -
%POPUJOTUBMMUIFDBNFSBJO
FYUSFNFUFNQFSBUVSFDPOEJUJPOT
%POPUUPVDIUIFGSPOUMFOTPGUIF
DBNFSB
%POPUFYQPTFUIFDBNFSBUPSBJO
PSTQJMMMJRVJETPOJU
%POPUJOTUBMMPSVTFUIFDBNFSBJOBO
FOWJSPONFOUXIFSFUIFIVNJEJUZJTIJHI
%POPUJOTUBMMPSVTFUIFDBNFSBJOBO
FOWJSPONFOUXIFSFUIFIVNJEJUZJTIJHI
/FWFSLFFQUIFDBNFSBQPJOUFE
EJSFDUMZBUTUSPOHMJHIU
%POPUFYQPTFUIFDBNFSBUP
SBEJPBDUJWJUZ
%POPUJOTUBMMUIFDBNFSBVOEFS
VOTUBCMFMJHIUJOHDPOEJUJPOT
%POPUESPQUIFDBNFSBPSTVCKFDU
JUUPQIZTJDBMTIPDLT
Only use the camera under conditions
where temperatures are between
-10°C and +50°C. Be especially careful to provide
ventilation when operating under high
temperatures.
This is one of the most important parts of the
camera. Be careful not to leave
fingerprints on the lens cover.
If it gets wet, wipe dry immediately.
Liquids can contain minerals that
corrode the electronic components.
It can cause malfunctions to occur.
If exposed to radioactivity the CCD
will fail.
Severe lighting change or flicker can
cause the camera to work improperly.
NOTE
* If the camera is exposed to
spotlight or object reflecting
strong light, smear or blooming
may occur.
* please check that the power
satisfies the normal specification
before connecting the camera.
1SFDBVUJPOT

- 12 -
4BGFUZ*OTUSVDUJPOT
1SFDBVUJPOTGPSVTF
1MFBTFIBOEMFUIJTDBNFSBDBSFGVMMZ
Ł
Ł
ŁDo not disassemble this camera other than to make initial adjustments
Ł

Ł

Ł
Ł
Ł
Ł
Ł


- 13 -
م
6HWXS0HQX
)PXUP4FU6QUIFDBNFSBNFOV
02'(
5(7851
02'(
5(7851
%5,*+71(66
$872
63((' a
6(1683
$*&
5(7851
$872
$:%
$:&6(7
.(/9,1
5*$,1
%*$,1
2))
/(9(/
02'(
5(7851
+326
9326
+6,=(
96,=(
5(7851
:(,*+7
'15 2))/2:0,''/(+,*+
:'5 /2:0,''/(+,*+
%$&./,*+7
a
0$18$/
/2:0,''/(+,*+
a
a
5(7851
+/&
5(7851
a
a
a%/&
$//'$<1,*+721/<
(;32685(
a
:+,7(%$/
1250$/'(%/85
2))a;
a
0$18$/
,1'225287'225'(%/85
5(7851
6+877(5
a
/'07
57$/'07 57$/'07 57$/'07 57$/'07
/(16
'&
0$18$/
)/,&.(5

- 14 -
م
6HWXS0HQX
)PXUP4FU6QUIFDBNFSBNFOV
60$57,5
$*&7+5(6
$*&0$5*,1
'(/$<
&2/25
60$57,5
60$57,5
(;7(516:
'(/$<
(;7(51
5(7851
'$<1,*+7
/2:+,*+
a
a
%:
a
a
a$872
/2:0,''/(+,*+
/2:0,''/(+,*+
5(7851
5(7851
=21(180 a
=21(',63 212))
+326 a
9326 a
+6,=( a
96,=( a
</(9(/ a
&5/(9(/ a
&%/(9(/ a
35,9$&<
5(7851
2))
5(7851
21
6+$531(66
*$00$
&2/25*$,1
0,5525
)/,3
'=220
$&(
02'( $8720$18$/
/(9(/ /2:0,''/(+,*+
:(,*+7 a
21
'()2*
2))
21
6+$',1*
212))
212))
;a;
a
5(7851
5(7851
/2:0,''/(+,*+
2))
,0$*(
a
a

- 15 -
م
6HWXS0HQX
)PXUP4FU6QUIFDBNFSBNFOV
2))
6(16,7,9,7<
'&02'(
:,1'2:721(
:,1'2:86(
'(7+326
'(79326
'(7+6,=(
'(796,=(
$/$50
5(7851
&$0,'
%$8'5$7(
2))6(7 a
28738702'(
&2/2563$&(
)5$0(5$7(
&9%6
/$1*8$*(
&2/25%$5
5(6(7
5(7851
(;,7
,0$*(5$1*(
33&5233
a
a
a
a
86(5 5(7851
)8//
&203
21
2))21
<896'&%&5+'&%&5
2))21
a
a
a
)36)36
027,21
6<67(0
&20
2))21
+'(/$< 2))21
21
3$/176&
a

5(7851
(1*&+1&+16-31.25

- 16 -
Menu setting can be selected by the button inside the camera.
1. Press the set button.
* The Set Up menu will be displayed on the monitor.
2. Move and select the required function using the Up and Down button.
* Move the triangular indicator Up or Down to select the desired feature by pressing
the Up or Down button.
0HQX6HW8S
MENU
MENU
1.LENS
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.DNR
6.DAY&NIGHT
7.IMAGE
8.MOTION
9.SYSTEM
10.EXIT
1.LENS
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.DNR
6.DAY&NIGHT
7.IMAGE
8.MOTION
9.SYSTEM
10.EXIT
DCAUTO
AUTO
OFF
OFF
AUTO
OFF
DCAUTO
AUTO
OFF
OFF
AUTO
OFF

- 17 -
3. Change menu settings using the Left or Right button.
* Available values or Status are displayed by pressing the Left or Right buttons.
Press the button until desired value / status is displayed.
4. After Changing the setting move the arrow indicator to EXIT and press the
SET button to EXIT.
1. Move the triangular indicator to LENS using the Up and Down buttons on the Set Up menu screen.
2. Select the desired lens type by pressing the Left of Right button.
NOTE
* Move to the available submenu by moving arrow to desired feature.
/(16
MENU
1.LENS
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.DNR
6.DAY&NIGHT
7.IMAGE
8.MOTION
9.SYSTEM
10.EXIT
DCAUTO
AUTO
OFF
OFF
AUTO
OFF

- 18 -
1. On the Set Up menu, Select EXPOSURE by using the Up or Down button.
(;32685(
NOTE
* When you select the mode setup, you can select INDOOR, OUTDOOR or DEBLUR depending on
the installation environment.
*On manual mode, you can select NORMAL or DEBLUR depending on the installation
environment.
MODE
MODE
RETURN
INDOOR
RET
2. Select the desired shutter mode by pressing the Left or Right button.
EXPOSURE
BRIGHTNESS
SHUTTER
SENSE-UP
AGC
RETURN
IIIIIIIIIIIIIIIIIII| 20
AUTO
OFF
IIIIIIIIIIIIIIIIIII| 20
MENU
1.LENS
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.DNR
6.DAY&NIGHT
7.IMAGE
8.MOTION
9.SYSTEM
10.EXIT
DC
AUTO
OFF
OFF
AUTO
OFF

- 19 -
ೠBRIGHTNESS : The brightness can be adjusted. The brightness control range is 1~20.
ೠSHUTTER : DC lens is launched with the setting of 1/30 and the manual lens is launched
with the setting of Auto shutter, but the shutter speed can be adjusted from 1/30 to 1/30,000.
ȥFLK : Select FLK mode if flickering occurs ; caused by the unmatched frequency of electric light.
NOTE
* Sense-Up mode is not worked when Electronic shutter is selected as Manual.
ೠSENSE-UP : The bright screen can be displayed by sensing the degree of the darkness automatically
under the circumstance of low light condition or at night.
ȥOff ~x32 Level Adjustable.
ೠAGC (Auto Gain Control) : The higher the AGC level is, the more noises appear.
ȥ0~20 Level selectable.
:KLWH%DODQFH
Use this function when the color adjustment of a screen is needed.
1. Move the triangular indicator to WHITE BAL on the SETUP menu screen using the Up and Down button.
2. Select the desired mode by using the left or Right button.
MENU
1.LENS
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.DNR
6.DAY&NIGHT
7.IMAGE
8.MOTION
9.SYSTEM
10.EXIT
DC
AUTO
OFF
OFF
AUTO
OFF