➢Works at 10/100Mbps in Full-Duplex mode for both TX
port and FX port;
➢Supports Auto MDI/MDIX for TX port;
➢Provides switch con-gyration of Force /Auto transfer
mode for FX port;
➢FX port support hot-swappable;
➢Extends -fiber distance up to 0.55/2km for multi-
mode -fiber and 10/20/40/80/100/120km for single-
mode -fiber;
➢Easy-to-view LED indicators provide status to monitor
network activity easily;
➢1x RJ45 port and 1x fiber SC port;
➢The distance support to 20KM.
Introduction
The Transceiver converts 10/100BASE-SX/LX/LH/EX/ZX -fiber to 10/100Base-T copper media or vice versa.
It is designed for use with 850nm multi-mode/1310nm single-mode/WDM -fiber cable utilizing the SC-
Type connector, transmitting data up to 0.55 kilometers or 100 kilometers. What's more, the SFP to
Ethernet Converter can work as a standalone device (no chassis required) or with EWIND’s 19”system
chassis.
TECHNICAL SPECIFICATION