Exagerate ZELIG PAD 210G User manual

ZELIG PAD 210G
10.1” MULTI TOUCH DUAL CORE 3G TABLET PC
USER MANUAL
XZPAD210G
www.hamletcom.com

2
Dear Customer,
thanks for choosing an Hamlet product. Please carefully follow the
instructions for its use and maintenance and, once this item has run
its life span, we kindly ask You to dispose of it in an environmentally
friendly way, by putting it in the separate bins for electrical/electronic
waste, or to bring it back to your retailer who will collect it for free.
We inform You this product is manufactured with materials and components in
compliance with ROHS directive 2002/95/CE; with WEEE Directives
2002/96/CE, 2003/108/CE Italian Legislative Decree 2005/151 and EMC
Directive 2004/108/EC for the following standards:
EN 55022: 2010
EN 55024: 2010
EN 61000-3-2: 2006 + A1: 2009 + A2: 2009
EN 61000-3-3: 2008
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.
The complete CE declaration of conformity of the product can be obtained by
contacting Hamlet at [email protected].

3
The information on the importer for your country are available in the “About Us”
section of the Hamlet website at www.hamletcom.com.
Trademarks
All trademarks and company names mentioned in this manual are used for
description purpose only and remain property of their respective owners.
Changes
The material in this document is for information only and subject to change
without notice. Specifications and appearance are subject to change without
prior notice.
Product Registration
Register now your product on the home page of Hamlet website at
www.hamletcom.com.
Support
To obtain technical information or assistance please visit Hamlet website at
page http://english.hamletcom.com/support.aspx.
If the website service did not resolve your problem or the information received
were not exhaustive, please contact directly Hamlet at e-mail address
[email protected].

4
Frequently Asked Questions
Before use of technical assistance, please find answers to frequently asked
questions listed below.
I can not connect to download the app from the market
The tablet have to be updated, contact the technical assistance via the support
area of the Hamlet website.
Tablet does not start
Press the reset button on the tablet (if present) for at least 3 seconds and
restart the device. If the problem persists, restore the firmware of the tablet
following the instructions provided in the support area of the Hamlet website.
An accessory of the tablet is not working (e.g. power supply)
Contact technical support by e-mail to get the replacement of the defective part
only at [e-mail].
The touch screen does not respond well or is not accurate
With the battery level close to zero or tablet connected to the power supply,
electrical interference may make the tablet touch screen inaccurate. Charging
the batteries or disconnecting the power supply is restore full functionality.
If I connect the tablet to a PC or pen drive can not transfer files
To activate the connection between tablet and computer the "Turn on USB
storage" must be enabled (see section 4 of the manual). For connecting
peripherals such as pen drives, memory card readers or external hard drives a

5
specific OTG USB cable is required (not included).
Android
Q: What Android OS version is on my Device?
A: Android 4.1.
Basic Functionality
Q: Do I have to charge the battery before use?
A: You should charge the battery for at least 6 hours, but you can use the
device while it’s being charged. Use the included power adapter to charge.
Media Cards
Q: Which media cards are compatible with my Device?
A: Micro SD cards with capacity up to 32 GB.
Music
Q: What type of music files can I play on my device?
A: MP3, WAV, AAC, WMA.
Q: How do I add music files to my device?
A: Copy the music files from your PC, Micro SD card or USB storage device
directly to your device.
Photos
Q: What type of photo files can I view on my device?
A: JPEG, BMP, GIF, PNG.

6
Q: How do I add photo files to my device?
A: Copy the photos from your PC, Micro SD card or USB storage device.
Videos
Q: What type of video files can I play on my device?
A: Video decoding (Full HD) support all formats of video such as MPEG-4,
MOV, AVI, MKV and other popular video formats.
Q: Can I play YouTube videos on my device?
A: Yes, you can use the YouTube application downloadable for free from online
markets.
Q: How do I add video files to my device?
A: Copy the video files from your PC, Micro SD card or USB storage device.
Wi-Fi
Q: Do I need a Wi-Fi adapter to connect to the Internet?
A: No, the Wi-Fi adapter is built-in to the device.

7
1 Introduction
1.1 What’s Included
The following components are included with your purchased product:
•Zelig Pad 210G Tablet PC
•Power Adapter
•USB Cable
•Instruction Manual
1.2 Getting Started
Before operating your Tablet PC for the first time, please read this manual
carefully and follow the instructions as below.
1.3 Battery charging
The tablet is equipped with a built-in rechargeable Lithium battery. It is
suggested to fully charge the battery before use.
We strongly recommend to use the power adapter included in the packaging,
using other adapter may damage the tablet and void the warranty.
Charging Process
•Connect the power adapter to your tablet, and plug the power adapter to
the nearest electrical outlet.
•Users can still use the tablet while it is being charged.

8
2 Appearance and buttons

9
2.1 Front camera
2.2 Back camera
2.3 Speakers
2.4 Power button
Turn on/off tablet.
2.5 Volume button
2.6 Micro SD card slot
2.7 Mini HDMI port
2.8 Micro USB port
Connect to PC for data transmission or connection with external USB
devices. The USB cable must be OTG compliant.
2.9 SIM card slot
2.10 Power socket
2.11 Microphone
2.12 Headphone socket
3.5 mm standard earphone jack.

10
3 Turn ON/OFF Tablet
3.1 Turn On: after the battery has been fully charged, press & hold the power
switch for around 3 seconds to turn on the device. Screen lock will be
showed after starting up.
3.2 Turn Off: When the tablet is ON, press & hold the power switch for around
3 seconds and the system will popup out power off option, tap on it to turn
the tablet off.
3.3 Lock screen: quickly press Power Switch and release to lock screen.
3.4 Unlock screen: slide the lock icon rightward onto the unlock icon to unlock
the screen and go to main interface; Slide the lock icon leftward onto the
camera icon to open camera.

11
Remarks:
When battery power has been used up, the tablet will shut down itself
automatically.
If you illegally turn off the device, restart will scan and restore the disk, it
may take longer time to enter into system.

12
4 Connection with PC
4.1 Use the USB cable provided to connect the tablet with PC, device will pop
up the USB connection window, click “Turn on USB storage” to connect
to PC, in the connection mode, you can copy or delete the file on the
device or the file on the memory device.

13
5 Tablet Operation Interface
5.1 After starting up, you will enter into below main screen interface.
5.2 In the main interface, you can manage main interface software icons:
press the icon and hold it for 3 seconds, then you can drag anywhere in
the main interface.
5.3 Delete icons: press the icon and hold it for 3 seconds, and drag the icon
onto the “Remove” icon, then you can delete that icon from desktop.

14
5.4 Touch the screen and hold for around 4 seconds, the dialog box “Choose
wallpaper from” will pop out as shown below:
You can choose the wallpaper from different sources and change the
wallpaper.

15
5.5 Status Bar Descriptions
From left to right: Back to previous interface, Back to main interface, Display the
Apps performed previously, Menu key, USB connected, USB debugging
connected, microSD-card information, Current time, battery charge icons,
current time.
5.6 Quick Guide For Touch Operations
No matter which interface you are on the screen, you can go back to main
screen by tapping the home key located at the left bottom corner of
the main screen.
【Attention】The home key functions as back to main screen interface.
During options, by tapping the back key at the left bottom corner of
the touch screen, you can return to previous screen interface.

16
Click to see all history of Apps performed previously.
In the main interface, you can touch the icon to see all the APPS,
tap on any App icon and hold it for around 3 seconds, you can drag that
App icon onto main screen interface.

17
6 Basic Settings
6.1 WIRELESS & NETWORKS
Wi-Fi
Tap on setting icon, then tap on the “OFF” to open Wi-Fi, All available
Wi-Fi networks will be listed, tap on your Wi-Fi network and start to
connect. If the Wi-Fi network does not need a password, tap "connect" to start
the connection. If the Wi-Fi network needs a password, then input the
password and tap “connect” to start the connection. If the Wi-Fi network
has been successfully connected before, that information will be stored.
Connection will be done automatically. Once your tablet connects to Wi-Fi
successfully, the Wi-Fi icon will appear on the status bar at the below
of the screen.

18
Bluetooth
Select this option to turn on/off Bluetooth function. The tablet will automatically
scan all available Bluetooth devices and list them.
Data Usage
Select to turn on/off Mobile data, Set mobile data limit.

19
More…
Select to turn on/off Airplane mode, to setup Ethernet connection, VPN and
Mobile networks.
Configuring the 3G connection
The following steps describe how to configure the device for browsing the
Internet via a 3G connection.
Before proceeding to the following configuration please check that the charge
of the battery is at least 50%.
1. Turn off Wi-Fi and turn off the Tablet.
2. Enter the phone card (SIM) in the SIM slot and turn on the Tablet.
Note: it is recommended to turn off the SIM card PIN code request via a
mobile phone or smartphone before insertion.
3. For the first connection, make sure to be in an area with good coverage of
the 3G signal.
Note: You can check the coverage with a last generation mobile phone or
smartphone (3G symbol should appear on display).

20
4. After switching on the tablet, wait about 2 minutes to allow the device to be
configured for the SIM card.
5. In the lower right of the screen the 3G icon will appear to indicate the signal
strength.
6. Enter the "Settings" screen and under "Wireless & Networks" select
"More..." and then "Mobile networks".
7. On the "Mobile networks settings" screen verify that the "Modem power"
option is enabled. If not turn it on and go back to step 2.
8. Open the "Access Point Names" to view the list of APNs (Access Point
Name) provided by your mobile operator (check the correct APN with your
mobile operator).
9. Select the desired APN and wait a few seconds. In presence of 3G
coverage the icon in the lower right will turn blue.
10. Exit the current screen and verify the access to the Internet via the
"Browser" App.
These settings are to be made only to the first insertion of the SIM card. On
subsequent reboots of the device it will be configured automatically.
Before performing this procedure please contact the customer service of your
mobile network provider to check the correct APN connection and the
compatibility of the SIM for 3G network connection.
Sometimes it may be useful to reset the tablet to factory settings. For the
recovery process, please refer to section 6.3 of this manual.