ExBrite ZPFL5215DCFMLED User manual

ZPFL5215DCFMLED

ExBrite
ExBrite

Leaf Fork X3
Remote control x1
Blade x3 Motor x1 Lamp panel x1
Glass shade x1 LED light source x1
Installation Guide
Balance
pieces
x1
x4
x2
x7
x10
x10
x4
x5
Ceiling plate x1

3
Step1:
Use self-tapping screws to lock the hanger to the wood ceiling
Ceiling plate

Input L
Input N
U
V
W
Step2:
1.The remote control receiver is wired according to the diagram above.
After connecting, put the remote control receiver on the motor
2.Align the latch on the top of the motor with the screw on the ceiling
plate and turn it to the right
3.Use screws to lock the motor and ceiling plate

Pack screw
→
3 4
Place a paper pad on each screw and then secure the blade arm to the blade.
Align the blade holes with the motor screw holes, tighten the screw and
secure all blades.
Note: Tighten the blade screw twice

snge-pnpug
Turn the glass lampshade to lock the lamp pan