Exposure 2010S2D Instruction manual

Rear of exposure 2010S2D Integrated Amplifier
SPK1 SPK2
The Exposure 2010S2D Integrated Amplifier is fitted
high fidelity engineering
since 1974
FA-Ex2010S2 IA (convert).indd 1FA-Ex2010S2 IA (convert).indd 1
FA-Ex2010S2 IA (convert).indd 1
FA-Ex2010S2 IA (convert).indd 1
FA-Ex2010S2 IA (convert).indd 1
FA-Ex2010S2 IA (convert).indd 1
FA-Ex2010S2 IA (convert).indd 1
FA-Ex2010S2 IA (convert).indd 1FA-Ex2010S2 IA (convert).indd 1
FA-Ex2010S2 IA (convert).indd 1
FA-Ex2010S2 IA (convert).indd 1
5/31/2013 4:30:54 PM5/31/2013 4:30:54 PM
5/31/2013 4:30:54 PM
5/31/2013 4:30:54 PM
5/31/2013 4:30:54 PM
5/31/2013 4:30:54 PM
5/31/2013 4:30:54 PM
5/31/2013 4:30:54 PM
5/31/2013 4:30:54 PM
5/31/2013 4:30:54 PM
5/31/2013 4:30:54 PM
The Exposure 2010S2D
The Exposure 2010S2D Integrated Amplifier: Back View
will be extinguished.
Thank you for purchasing the Exposure 2010S2D IntegratedAmplifier.
Source Component Connections
AV - This input has a fixed gain for connection to AV Receivers. When the AV is selected the volume control has no effect and the volume LED
The Exposure 2010S2D Integrated Amplifier : Front View
Exposure 2010S2D Integrated Amplifier
2
D Integrated Amplifier
D
source component. Audio should now be
heard

Exposure 2010S2D Integrated Amplifier Extended Set-Up
The Exposure 2010S2D Integrated Amplifier is fitted with two sets of 4mm loudspeaker sockets for bi-wired connection. Another pair of speaker wires is
D Integrated
Rear of Exposure 2012S2D Integrated Amplifier
FA-Ex2010S2 IA (convert).indd 2FA-Ex2010S2 IA (convert).indd 2
FA-Ex2010S2 IA (convert).indd 2
FA-Ex2010S2 IA (convert).indd 2
FA-Ex2010S2 IA (convert).indd 2
FA-Ex2010S2 IA (convert).indd 2
FA-Ex2010S2 IA (convert).indd 2
FA-Ex2010S2 IA (convert).indd 2
FA-Ex2010S2 IA (convert).indd 2
5/31/2013 4:31:00 PM5/31/2013 4:31:00 PM
5/31/2013 4:31:00 PM
5/31/2013 4:31:00 PM
5/31/2013 4:31:00 PM
5/31/2013 4:31:00 PM
5/31/2013 4:31:00 PM
5/31/2013 4:31:00 PM
5/31/2013 4:31:00 PM
5/31/2013 4:31:00 PM
5/31/2013 4:31:00 PM
Bi-amping of suitable loudspeakers using a 2010S2D Integrated and a 2010S2 Power Amplifier provides a useful gain in subjective performance. The Integrated
Although the Exposure 2010S2D Integrated Amplifier is
While the Exposure 2010S2D Integrated Amplifier is
Rear of Exposure 2010S2D Integrated Amplifier
Note: Exposure 2010S2D
D
in your country of residence and (the following is optional but
recommended) registered at www.exposurehifi.com/warranty.html
For a long and trouble-free life of your Exposure 2010S2D Integrated
• Parts and labour costs for three (3) years from the date of Purchase.
5
4
6
Product disposal instructions
The symbol shown here and on the product means that the product is
classed as electrical or electronic waste and should not be disposed of
with other household waste at the end of its working life.
The Waste of Electrical and Electronic Equipment (WEEE) Directive (2002/96/EC)
has been put in place to recycle products using the best available recovery and
recycling techniques to minimize the impact on the environment, treat any
hazardous substances and avoid increasing landfill.
When you have no further use for this product, please remove any batteries and
dispose of them and the product as per your local authority’s recycling process.
For more information please contact your local authority or the retailer where the
product was purchased.
warranty.