
2. TUNER Function explanation
Keys Explanation Panel
Remote
1~10
When press these keys only, the tuner will jump to preset station
1~10.
√
+5
Use this Key and number keys can get the preset station you
want. For example: If you want to get preset station 8, press +5
key first, the LCD will display "+5” and flashing. Then press
number key 3, you will get station 8.
If you press "+5” key twice, the station will become the last
number plus 5, for example, if right now the station number is 8.
Press "+5”key twice, the station number will become 13.
√
+10 Press this key once the preset station number will add 10. √
DIRECT
This is the direct search function. Press this key once, then use
number key to input the station frequency, again press DIRECT
key to confirm the frequency. The tuner jump to this station. If the
input frequency is beyond the range, the tuner will display ERR.
√
DOWN 1 press / 1 step tuning by" DOWN” "UP” key. When DOWN key
is pressed for more than 1.5 seconds seek tuning is started. √ √
UP
1 press / 1 step tuning by" DOWN” "UP” key. When UP key is
pressed for more than 1.5 seconds seek tuning is started.
√ √
MO/ST Press this key, the tuner change between stereo and mono
mode. √
ASM
This is Auto search and memory function. Press this key for
more than 1.5 seconds, the tuner will search the station and
store in memory automatically.
√
BAND
The receiving band is changed cyclically by pressing BAND
key.
√ √
SLEEP
When SLEEP key is pressed, the sleep function is set and the
time is displayed for 2 seconds. The sleep time is changed as
shown below, every pressing the SLEEP key during the sleep
time is displayed.
90 80 70 60 50 40 30 20 10
OFF
The sleep mark is on during the sleep function is set.
The sleep function is cleared, if the SLEEP key was pressed
when the sleep time is not displayed and sleep function is set.
The power is automatically off fatter sleep time, when sleep
function is set.
√
√