exxent BL-020B User manual

High Performance Commercial Blender
Read And Save These Instructions
Model:BL-020B AC 230V~ 0Hz 1 00W

Important Safeguards
1. Read all instructions.
2. To protect against risk of electrical shock, do not put motor base in water or other liquid.
3. Close adult supervision is necessary when appliance is used by or near children.
4. Unplug the power cord from the wall outlet when the machine is not in use, before putting on
or taking off parts, and before cleaning other than washing the container.
. Never contact moving parts.
6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions
or is dropped or damaged in any manner. Call service at once for possible replacement,
examination, repair, electrical or mechanical adjustment.
7. Do not use outdoors.
8. Do not let the power cord hang over edge of table or counter, or touch hot surfaces.
9. Keep hands and utensils out of the container while motor is running to prevent the possibility
of severe personal injury and/or damage to the blender. A rubber scraper may be used, but
only when the blender is not running.
10. CAUTION: Blade is sharp. Handle carefully.
Never try to remove blade while container is sitting on the motor base.
Do not operate with loose, knicked or damaged blades.
To reduce the risk of personal injury, never place blade assembly on motor base without
blender container properly attached.
11. Always operate with the lid in place.
12. Display window area will scratch when contacted with a scouring pad or sharp object. Use a
soft cloth to wipe the control panel area clean.
Feature
BL-1 00 series blender is developed base on years of experience technology. Strong power motor
with Stainless steel blades for completely blending foods.
Industrial high-speed motor ,highest speed reach to 37000rpm, high efficiency, powerful,
2000 hour warranty. Fan cooler and Motor heat protect system.
Electronic system to control speed, steady current, protect the motor, reduce the interfere to
the environment.
Overcurrent protection system.
SET switch, variable speed switch, pulse switch to satisfied different request.
Durable Stainless steel driven connector.
Blades group is geared by ball bearing, never be burned in long time running.
Special durable material waterproof adhesive
Germany Bayer PC material container.

Operation Instruction
Fruit Ice
1. Material: Ice, Fruits, Water. They are all necessary.
2. Put the material into the container, cover the lid, when make thick drink, please plug the
blending stick.
3. Set the variable button to a high speed(or the highest speed.)
4. Turn on SET Switch, if water is limited, please use the stick.
. 3- seconds later, when the blending sound suddenly diminish, which means the material has
been enough mashed, Stop the machine at once, to prevent the ice get into water with too
much blending.
6. When mix the fruit, water and ice, the fruit juice will wrap the ice grain. It is the best Fruit
Smoothie. Otherwise, only Ice and water, they won’t get the Smoothie effect. So Ice, Fruit,
Water are all necessary.
Blending Fruit & Vegetable
1. Put fruit or vegetable and little water into the container.
2. Set medium speed or high speed.
3. Turn On SET switch, after 4-6 seconds blending, when the material roll smoothly , which
means the material has been enough mashed, Stop the machine at once, to prevent over
blending.
Note:
. Inching switch is mainly for testing or blending special materials, do not use it
frequently.
2. Do not run more than 2 minutes when blending dry materials.
Control Panel
Mechanical Control Panel
ON/OFF Switch
Up for ON; Down for OFF.

HIGH/LOW Pulse Switch
Up for High speed at 29000rpm; Down for Low speed at 16000rpm.
Pulse button can only used when the power switch is ON, The PULSE switch can be used to
quickly refresh product in the container by depressing the switch and holding down as long as
needed.
VARIABLE SPEED Dial
Allow user to select continuously variable motor speeds ranging from 16000rpm to 29000rpm.
PULSE switch is overrides the variable speed dial.
Remark:
.On all units the built-in thermal sensor keeps track of how hot the motor gets and will
automatically shut down the motor if the motor is overheating. User should remove the
container and run the machine until cool. This takes about 2 minutes.
2.Special Note:
Please check your operation when the motor is overheated. If the machine run all the day or
the material is too thick , it will easy to get overheated.
Specification
Model BL-020B
Voltage 230V~50Hz / 0V~60Hz
Capacity 2000c.c
Endurance of Container -40℃~ 80℃
Power 500W
Weight 5.5kgs
Length of Cord .8M
Dimension W2 0xD230xH520mm
Protector Current protector, Thermal protector for motor
* 0V machine is available in 5A plug. 220V machine is available in 0A plug.