Eye Trax PREDATOR User manual

PREDATOR
INSTALLATION GUIDE
WATCHING WHERE OTHER CAMERA’S CAN’T

STEP 1
Install antennas on the back of the camera
box and power the camera on.
STEP 4
Fasten camera using provided screws and
wingnuts. Tighten with a Phillips head
screwdriver.
STEP 5
Install solar panel mounting bracket to the
bracket on the pole using the 3 provided
screws.
STEP 6
Place solar panel on horizontal bracket on
top of pole and align the wholes.
STEP 2
Install camera mounting bracket to bracket
on the pole using 3 provided screws.
STEP 3
Install camera on vertical bracket on top
pole.
INSTALLATION GUIDE
HOW TO INSTALL

STEP 7
Loosen bolt and turn mounting bracket
until solar panel faces due south by
matiching north on the compass with the
red line on the bracket. Fasten bolt tight
once the panel faces south.
STEP 9
Login to view your camera using the Eye
Trax software at eyetrax.net.
STEP 8
Connect the camera’s power cable to the
solar panel wire. Twist tightly to ensure
water tight connection.
STEP 10
Check to see your camera working.
Available on phone, tablet or computer.
INSTALLATION GUIDE
HOW TO INSTALL
STEP 6
Secure solar panel with two provided
screws. Tighten with a Phillips head
screwdriver.