4
instead of DTS or Dolby if you cannot get sound from the recorded file.
Recorded Files
You can take off USB flash drive to connect to your computer to check the recorded
video files after you stopped recording. It is named Encode_1080P_1.mp4 or
Encode_1.mp4.
Every record/stop operation will create a different recording file: Encode_1080P_1,
Encode_1080P_2, Encode_1080P_3…and so on.
The max size per file will be around 1.95GB (About 15 minutes for 1080p video
recording), when you record a video more than 1.95GB, ezcap288 HD Video capture will
partition it in more than one file, for example: if you record a 45 minutes 1080p video by
one click recording, you will see 3 files: Encode_1080P_1, Encode_1080P_1_1,
Encode_1080P_1_2 …and so on.
After long time using, you will see the number of recording file become too big, for
example Encode_234, but you want it be start from Encode_0, to do it you just keep
press REC button before power on, then plug the DC power jack to power on the
device, after 3 seconds, the file number will start from 0.
Update Firmware
Update firmware: you maybe need update firmware for some reason. Unplug DC power
jack to power off the device. Copy the firmware file in to USB flash drive, and plug it to
device. Plug DC power jack to power on, the indicator will flash 7~8 seconds, and
