EZYFIX Classic Bathroom Basin Set User manual

Installation guide
Classic Bathroom Basin Set

Features and Benefits
•Convert old plastic taps to sparkling chrome
•Timeless classic design
•Durable solid brass construction
•15 minute installation
•1300 EZYFIX DIY Helpline
* See full warranty statement at the end of these instructions

How EZYFIX works.
Spindle Extension
If needed for deep
seated tap bodies.
New Nipple
will adapt your spout
to either 5/8” or 1/2”
existing breech piece
nipple.
Replace O-ring
We strongly
recommend replacing
the old existing o-ring
on your breech piece.

Tools you need to install
this EZYFIX tap set.
Adjustable spanner
Pliers

Tools you may need to remove
your old taps
Rubber strap wrench
Ideal for undoing dress
fittings on old taps or any
component that doesn’t
have flat surfaces to lock a
spanner onto.
Pointed nose pliers
Great for pulling out old
worn tap washers which
tend to swell over the
years making them tricky
to remove by hand.
Basin wrench
Sometimes the basin spout locknut at the back
of your cabinet is tricky to access. This tool
helps overcome the issue OR alternatively look
out for our EZYtip in this guide.

Stage 1. Remove old taps and spout
1. Turn off the water at your meter and
drain your system by opening the
lowest hot and cold outlet in your
house. Usually the bath taps.
2. Remove the old buttons, handles, flanges,
spindles and jumper valves. The rubber strap
wrench is ideal for undoing tight dress flanges.
3. Undo the old spout locknut underneath your basin then twist and pull
out the spout.
EZYtip: If you are struggling to loosen this nut simply lock a spanner onto
it with one hand whilst twisting the spout from above with the other.
Cut out the
existing o-ring
on the breech
piece and
replace with
the one
supplied with
your new taps
before putting
the new spout
on.
Spout locknut.

Stage 2. install your new EZYFIX taps
1. Select the correct adaptor to match the length of your existing spindle.
EZYtip: Wind the spindle up first before screwing in with a spanner to avoid
damage to your new washer .
2. Screw on the tap flange, handle and buttons. Tighten the button with
the supplied nylon spanner.

Stage 3. install your new EZYFIX spout
1. Select the correct sized adaptor, slide flange onto the spout then apply
thread tape to the short end of the adaptor and screw into spout.
2. Push on the new spout and re-tighten locknut beneath basin.
EZYtip: Lubricate the orings on the existing breech piece nipple
with tap lubricant or even olive oil! to make assembly easy.
Must put
thread tape
on clockwise.

Job done!
Job done ! 
Now make sure you tell your friends
about it on our facebook page!
www.facebook.com/EZYFIX
Need help still?
Call 1300 EZYFIX
DIY helpline
After
See how we have
revolutionised showers too.
www.ezyfix.com.au

Stage 4. Job done !
You can now turn off your
new taps and turn on your
water supply at the mains.
Job done ! 
Now make sure you tell your friends
about it on our facebook page!
www.facebook.com/EZYFIX
Need help still?
Call 1300 EZYFIX
DIY helpline
See how we have
revolutionised showers too.
www.ezyfix.com.au

NO EXCUSES - 5 YEAR WARRANTY –WHAT DOES IT MEAN?
It means that anyone can install EZYFIX tapware as per our instructions and still be covered by our
full 5 year warranty. Most other tapware manufacturers void your warranty if their products are not
installed by a licensed plumber.
IMPORTANT NOTE: Please check your relevant state laws before undertaking DIY plumbing repairs.
Any claim under this warranty must be made within 5 years of the date of purchase of the product.
To make a claim under the warranty, contact EZYFIX tapware direct.
EZYFIX tapware will pay your reasonable, direct expenses of claiming under this warranty. You may
submit details and proof of your expense claim to EZYFIX tapware for consideration.
This warranty is given by EZYFIX Tapware ABN 10806209, PO Box 158 Bayswater, W.A. 6053, (08)
9272 6511, [email protected] .
This warranty is provided in addition to the other rights and remedies you have under law: our
goods come with guarantees which cannot be excluded under the Australian Consumer Law. You
are entitled to replacement or refund for a major failure and to compensation for other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure.
Scan this QR Code with your
smart phone to see
installation videos and
housewife vs plumber video