F-SECURE MOBILE SECURITY 6 FOR S60 - User manual

F-Secure
Mobile Security
for S60
User’s Guide

"F-Secure" and the triangle symbol are registered trademarks of F-Secure Corporation and F-Secure
product names and symbols/logos are either trademarks or registered trademarks of F-Secure
Corporation. All product names referenced herein are trademarks or registered trademarks of their
respective companies. F-Secure Corporation disclaims proprietary interest in the marks and names of
others. Although F-Secure Corporation makes every effort to ensure that this information is accurate,
F-Secure Corporation will not be liable for any errors or omission of facts contained herein. F-Secure
Corporation reserves the right to modify specifications cited in this document without prior notice.
Companies, names and data used in examples herein are fictitious unless otherwise noted. No part of
this document may be reproduced or transmitted in any form or by any means, electronic or
mechanical, for any purpose, without the express written permission of F-Secure Corporation.
This product may be covered by one or more F-Secure patents, including the following:
Copyright © 2004-2009 F-Secure Corporation. All rights reserved. 12000066-9L08
GB2353372 GB2366691 GB2366692 GB2366693 GB2367933 GB2368233
GB2374260

iii
Contents
About This Guide 1
How This Guide Is Organized .............................................................................................. 2
Conventions Used in F-Secure Guides................................................................................ 3
Symbols ...................................................................................................................... 3
Chapter 1 Introduction 5
1.1 F-Secure Mobile Security.............................................................................................6
1.2 Key features.................................................................................................................7
Chapter 2 Installation 8
2.1 System requirements ...................................................................................................9
2.2 Getting the product running on your device.................................................................9
2.2.1 Installation ........................................................................................................9
2.2.2 Activating the product after the installation.....................................................11
2.3 Transferring the subscription to a new device............................................................12
2.4 Uninstalling.................................................................................................................12
Chapter 3 Using F-Secure Mobile Security 13
3.1 Opening and closing the application ..........................................................................14
3.2 Scanning for viruses...................................................................................................15
3.2.1 Selecting the virus protection mode ...............................................................15
3.2.2 Processing infected files.................................................................................17
3.3 Using firewall..............................................................................................................18

iv
3.3.1 Selecting the protection level..........................................................................18
3.4 Protecting confidential information.............................................................................19
3.4.1 Using the device lock......................................................................................19
3.4.2 Using the remote Anti-theft.............................................................................20
3.4.3 Using the SMS alert........................................................................................21
3.4.4 Locating the lost device..................................................................................21
3.5 Protecting web browsing............................................................................................22
3.5.1 Using Browsing protection..............................................................................22
3.6 Keeping the application up-to-date ............................................................................24
3.6.1 Selecting the update mode.............................................................................24
3.6.2 Application updates........................................................................................25
3.7 Purchasing subscription service time.........................................................................26
3.8 Troubleshooting .........................................................................................................28
Technical Support 25
Overview ............................................................................................................................ 26
Virus descriptions on the web ............................................................................................26
Electronic mail support .......................................................................................................26
About F-Secure Corporation

1
ABOUT THIS GUIDE
How This Guide Is Organized...................................................... 2
Conventions Used in F-Secure Guides....................................... 3

2
How This Guide Is Organized
F-Secure Mobile Security User’s Guide is divided into the following
chapters:
Chapter 1. Introduction. Provides general information about F-Secure
Mobile Security.
Chapter 2. Installation. Gives instructions on installing and activating
F-Secure Mobile Security.
Chapter 3. Using F-Secure Mobile Security. Describes the F-Secure
Mobile Security user interface.
Technical Support. Provides the contact information for assistance.
About F-Secure Corporation. Describes the company background and
products.

3
Conventions Used in F-Secure Guides
This section describes the symbols, fonts, and terminology used in this
manual.
Symbols
An arrow indicates a one-step procedure.
Fonts
Arial bold (blue) is used to refer to menu names and commands, to
buttons and other items in a dialog box.
Arial Italics (blue) is used to refer to other chapters in the manual, book
titles, and titles of other manuals.
Arial Italics (black) is used for file and folder names, for figure and table
captions, and for directory tree names.
Arial underlined (blue) is used for user interface links.
WARNING: The warning symbol indicates a situation with a
risk of irreversible destruction to data.
IMPORTANT: An exclamation mark provides important information
that you need to consider.
REFERENCE - A book refers you to related information on the
topic available in another document.
l
NOTE - A note provides additional information that you should
consider.
TIP - A tip provides information that can help you perform a task
more quickly or easily.

4
PDF Document
This manual is provided in PDF (Portable Document Format). The PDF
document can be used for online viewing and printing using Adobe®
Acrobat® Reader. When printing the manual, please print the entire
manual, including the copyright and disclaimer statements.
For More Information
Visit F-Secure at http://www.f-secure.com for documentation, training
courses, downloads, and service and support contacts.
In our constant attempts to improve our documentation, we would
welcome your feedback. If you have any questions, comments, or
suggestions about this or any other F-Secure document, please contact
us at [e-mail].

5
1INTRODUCTION
F-Secure Mobile Security............................................................. 6
Key features................................................................................. 7

6
1.1 F-Secure Mobile Security
F-Secure Mobile Security is a software product that protects data stored
in your S60 device against malicious code attacks and monitors incoming
and outgoing connections and protects the device from network intrusion
attempts.
F-Secure Mobile Security scans all files for viruses automatically when
they are saved, copied, downloaded, synchronized or otherwise modified.
All infected files are immediately quarantined to protect all other data on
the device. The automatic scanning happens transparently on the
background.
To work effectively, antivirus software requires an always up-to-date virus
definition database. F-Secure Mobile Security retrieves the latest virus
definition databases automatically.

CHAPTER1 7
Introduction
1.2 Key features
F-Secure Mobile Security offers the following key features.
Transparent
operation The application runs in the background while you use your device.
Extensive
scanning The application automatically scans all files when they are accessed. You
can also manually scan your device for viruses whenever you want.
Automatic
updates The application automatically downloads regular updates to keep the
virus definition database up-to-date.
Firewall The application protects you from potential network harm by blocking
information that does not meet the set security criteria.
Anti-theft The application protects your confidential infromation by locking the
device automatically when the SIM card is changed. You can also send a
message to your mobile device to locate it or remotely wipe the data
stored on it if it is stolen.
Browsing
protection The application protects you from web sites that may steal your personal
information, including credit card numbers, user account information, and
passwords.

8
2INSTALLATION
System requirements.................................................................... 9
Getting the product running on your device.................................. 9
Uninstalling................................................................................. 12

CHAPTER2 9
Installation
2.1 System requirements
To use F-Secure Mobile Security, your device must meet the following
requirements:
To test your Internet access point, browse with your device browser to
https://msp.f-secure.com/web-test/
If you can access the page, your Internet access point is suitable for
activation and updates.
2.2 Getting the product running on your device
Getting your F-Secure Mobile Security running on your device is a
two-step process:
1. Install F-Secure Mobile Security. See “Installation”, 9.
2. Activate your subscription. See “Activating the product after the
installation”, 11.
2.2.1 Installation
Select one of the following ways to install F-Secure Mobile Security on
your device:
Install the application directly on the device, or
Download the installation file to your computer and install the
product via Nokia PC Suite.
Platform: Nokia S60 (3rd or 5th edition) devices.
See http://mobile.f-secure.com/devices/ for a full
list of supported devices.
Internet connection: You must have an Internet connection from your
device to activate the application.

10
Installation on the device
1. Download the installation file to your computer and move it to the
device or download the installation directly to your device.
2. If you downloaded the installation file directly, the installation starts
automatically. Otherwise, find and open the installation file that you
moved to the device.
3. When the installation is ready, restart your device if the installation
asks you to do so.
4. After the installation, you need to activate the product. The product
does not protect your device if you have not activated it.
Installation using your computer
To install F-Secure Mobile Security on your device using a computer, you
must have the .sis installation file and Nokia PC Suite installed on your
computer.
1. Connect your device to your computer.
2. Double-click the installation file to start the installation.
3. When the installation is ready, restart your device if the installation
asks you to do so.
4. After the installation, you need to activate the product. The product
does not protect your device if you have not activated it.

CHAPTER2 11
Installation
2.2.2 Activating the product after the installation
You need to activate the product after you have installed it.
You can activate the product with your subscription code or you can
activate Anti-theft only. Activating the product with only the Anti-theft
feature active does not require a subscription code, but other features are
not available until you upgrade the product.
The activating the product with the subscription code allows you to
download the latest updates from the update service.
To start the activation:
1. Open the application. The Welcome screen is displayed.
2. Press Continue.
3. Select the activation type:
To activate the product with only the Anti-theft feature active,
select Anti-theft only as the activation type and press Continue.
If you already have a subscription code, select Subscription
code as the activation type and press Continue. Then enter your
subscription code and press OK.
4. The activation requires a connection to the update service. Press Yes
to connect to the update service.The application connects to the
update service and activates the product.
If you used your subscription code to activate the product, the
application downloads the latest virus definition database during the
first update. For more information, see “Keeping the application
up-to-date”, 24.
5. After the product has downloaded all the necessary updates, the
application is complete. Press Continue to finish the activation.
You can purchase a subscription code from the F-Secure
estore; http://www.f-secure.com/estore.

12
After you have finished the activation, scan your device for viruses to
make sure your device is clean. For instructions, see “Manual scanning”,
16. The default firewall level after the installation and activation is Normal.
2.3 Transferring the subscription to a new device
You can transfer your subscription to a new device a maximum of four
times. The procedure is the sameas for normal installation and activation.
For instructions, see “Getting the product running on your device”, 9.
2.4 Uninstalling
To uninstall the application:
1. Open the application.
2. Select Options > Exit shut down the application.
3. Open Application Manager on your device.
4. Scroll to F-Secure Mobile Security.
5. Select Options > Remove.
6. Press Yes to confirm the uninstallation.
You should scan your device whenever the application asks you to
do so.
IMPORTANT: Scan you device, and remove all quarantined and
infected files before you uninstall F-Secure Mobile Security.

13
3USING F-SECURE
MOBILE SECURITY
Opening and closing the application........................................... 14
Scanning for viruses................................................................... 15
Using firewall.............................................................................. 18
Protecting confidential information............................................. 19
Protecting web browsing............................................................ 22
Keeping the application up-to-date............................................. 24
Purchasing subscription service time......................................... 26
Troubleshooting.......................................................................... 28

14
3.1 Opening and closing the application
After you have activated F-Secure Mobile Security, it starts up
automatically every time you turn on your device. If you have selected the
manual scanning mode, you need to start the application manually:
1. Press the Menu key and browse to the icon.
2. Select Options > Open.
Closing the
user interface Press the Hide soft key to hide the user interface. When the user
interface is hidden, the application keeps running on the background,
scanning your files for viruses automatically when they are accessed if
the real-time scanning mode is enabled, and the firewall protects the
system.
To shut down F-Secure Mobile Security completely, select Options >
Exit.
When the real-time scanning mode is enabled, F-Secure Mobile
Security runs on the background automatically. For more
information, see “Real-time scanning”, 15.
IMPORTANT: If you shut down the application, infected files are no
longer quarantined and the system is not protected against viruses.
Shutting down the application disables the firewall.

CHAPTER3 15
Using F-Secure Mobile Security
3.2 Scanning for viruses
The application scans all accessed and modified data on your device
automatically for malicious content when the real-time scanning is
enabled. If you do not want to use the real-time scanning, you can
manually scan all the data for viruses whenever you want.
3.2.1 Selecting the virus protection mode
1. Browse to Settings and press the selection key.
2. Select Virus protection from the settings selection list.
3. Select either the real-time or the manual Virus protection mode.
Real-time - F-Secure Mobile Security runs on the background
and scan files when they are accessed or modified. For more
information, see “Real-time scanning”, 15.
Manual - F-Secure Mobile Security scans files only when you run
the virus scan yourself. For more information, see “Manual
scanning”, 16.
4. Press Back.
Real-time scanning
The real-time scan scans files for malicious content automatically when
they are accessed or modified and when they are copied to the device.
Virus
alerts When F-Secure Mobile Security detects a virus during a real-time scan,
the virus is quarantined and added to the Infections list immediately.
F-Secure Mobile Security alerts you about viruses detected during the
real-time scan. You can press Yes to view details about the infected file.
For more information, see “Processing infected files”, 17.

16
Manual scanning
To scan all files on your device and the inserted memory card, follow
these instructions:
1. Browse to Virus protection and press the selection key.
2. Select Scan now.
3. After the virus scan is finished, the application displays the following
information:
4. Press Back to exit the scan. All infected files are quarantined and
cannot be accessed when F-Secure Mobile Security is running in the
background.
Infected The number of infections found. For more
information about removing infected files, see
”Processing infected files”, 17
Not Scanned The number of the files that were not scanned
during the scan. A file cannot be scanned if
another program has locked it or if the file is
corrupted.
Scanned The number of the files that were scanned.