Factoryfurniture QUAY Manual

Factory Furniture Ltd |5 Pioneer Road |Faringdon |Oxfordshire SN7 7BU |T [phone]
[e-mail] |www.factoryfurniture.co.uk
We reserve the right to change specification without notice. © 2017 Factory Furniture Ltd
Operation & Maintenance Manual
QUAY cycle stands

&
5HVSRQVLEOH
)RUHVW0DQDJHPHQW
Introduction
Design
Design, shop drawings and development by Factory Furniture Ltd.
Manufacture
Factory Furniture manufactured components. Products are assembled in Factory workshops, checked and
dispatched ready for installation. Replacement products or components thereof should be ordered direct from
Factory Furniture Ltd.
Copyright
The design copyright for the product and drawing copyright remains the sole property of Factory Furniture Ltd.
General Specifications
QUAY Cycle Stand A
Metric L 335mm | W 80mm | H 725mm *
Imperial length 1’ 1” | width 3” | height 2’ 4½” *
* Not incl. +200mm (8“) below ground level for sub-surface fix
Approx Weight 13kg
QUAY Bollard
Metric L 140mm | W 100mm | H 740mm *
Imperial length 5½” | width 4” | height 2’ 5” *
* Not including +200mm (8”) below ground level for sub-surface fix
Approx Weight 16kg
Detailed Material & Finish Specifications
Timber Slat(s)
• Manufactured from FSC®certified timber.
• Slats are profiled and left untreated as standard.
• Fixed to galvanised mild steel frame.
Frame
• Manufactured from mild steel with a hot dip galvanised finish. (Option for polyester powder coated finish
available on request (any RAL colour).
• Root fixed 200mm (8”) below ground level
General Maintenance (Recommended Schedule & Guidelines)
Daily/Weekly/Monthly (or as adopted)
Visual checks of timber slat(s) and frame - check all items for superficial or physical damage.
Three Monthly
Clean all items as detailed below check all fixings are seated correctly; inspect timber for serious damage and
splinters.
Six Monthly
Secure all fixings; full clean as detailed below; check that product is firmly secured to the ground
Specific Maintenance Details
FSC Timber
Clean with a stiff brush once per year, especially in more exposed locations, in order to prevent a verdigris type
build up on the timber surface. Ideally this should be completed in early spring. During the cleaning stage, all
exposed timber surfaces should be inspected for splits and splinters. Any splinters and graffiti should be
removed and the surface sanded with 100 grit sandpaper in order to remove any uneven / sharp edges or
surfaces.
Galvanised & Polyester Powder Coated Surfaces
For general cleaning using a damp cloth and warm soapy water only. Scourers and abrasive cleaners are NOT
suitable for this type of finish and may damage it. Before using any cleaning agents to remove graffiti etc. try
on a small, inconspicuous area first to avoid causing more unsightly damage.
2QUAY CYCLE STANDS specification
QUAY Cycle Stand B
Metric L 480mm | W 80mm | H 725mm *
Imperial length 1’ 7” | width 3” | height 2’ 4½” *
* Not incl. +200mm (8”) below ground level for sub-surface fix
Approx Weight 14kg

Repairs
FSC Timber
For light damage, please see section on specific maintenance details above. For instances of heavy damage,
the timber item should be replaced. Please order against the part number reference in the reordering section
towards the end of this manual.
Galvanised Surfaces
For light damage to hot dipped galvanised finishes repair using a high performance cold galvanising zinc spray
(70% zinc or above). Spray application should be carried out in accordance with approved methods detailed by
the product manufacturer. Please note that it is advisable to use professional painters to achieve best results
when touching up larger areas.
Polyester Powder Coated Surfaces
For light damage (scratches, chips etc.) repair using touch-up paint to match original colour (available from
Factory Furniture Ltd). Paint application should be carried out in accordance with approved methods detailed
by the paint manufacturer. Please note that it is advisable to use professional painters to achieve best results
when touching up larger areas. Products for respraying larger areas are available from Factory Furniture Ltd.
Heavy Damage
In the event of serious damage to any component, replacements should be ordered from Factory Furniture Ltd.
In this event (or if the product needs to be disassembled for any reason), please contact Factory Furniture for
detailed technical advice.
Contacts
Factory Furniture Ltd
5 Pioneer Road
Faringdon, Oxon
SN7 7BU UK
Tel [phone]
Email [e-mail]
Web www.factoryfurniture.co.uk
3QUAY CYCLE STANDS repairs

Cycle Stand B
Gnd
Lvl
Gnd
Lvl
8048080335
Foundation
1 no. pad
500x300x400mm in
C20 concrete
(recommendation only)
Foundation
1 no. pad
600x300x400mm in
C20 concrete
(recommendation only)
200 725 200 725
Cycle Stand A
Bollard
Gnd
Lvl
100140
Foundation 1 no. pad
400x400x400mm in
C20 concrete
(recommendation only)
200 740
Installation Instructions
ALL INSTALLATION WORKS TO BE CARRIED OUT BY COMPETENT PERSONNEL - INSTALL AS COMPLETE UNIT
Bike Stands (Sub-surface Fix Only)
Bollard (Sub-surface Fix Only)
Bike Stands / Bollard (sub-surface fix only)
1. Install suitable foundation pad (see illustration) with top face at ground level
2. As soon as possible after pouring concrete for pad, position bike stand / bollard in correct orientation
centrally in foundation pad. Maintain bike stand / bollard at correct height (200mm below ground) and
vertical whilst concrete sets (at least 24 hours).
4
QUAY CYCLE STANDS installation