FAIE FD112029 User manual

USER MANUAL FOR AUTOMATIC FOR RADIAL AND
TANGENTIAL EXTRACTORS 12/220V
Buttons functions:
-Time-/Time+ Increases and decreases work time of the extractor
-Speed-/Speed+ Increases and decreases work speed of the extractor
-Direction Sets the spinning direction of the extractor
-Memory Saves the set time and speed of the extractor
-Stop Stops the extractor
-Start Starts the extractor
Honigschleuder
112029
04.03.2021
Bedienungsanleitung

Using buttons Speed-/Speed+ you set the desired work speed of the extracotr ( from 10% to 100%). When
you are finished with setting the time and speed of the extractor, by pressing button Start, you start the
extractor, and set work time is shown on the screen, begining to count down from the set value to zero.
Direction of spinning of the extractor can be changed by pressing button
Direction, but only when the extractor comes to a full stop.
If you want to save the set work time and speed, you can do that by pressing button Memory.
Pressing the button Stop, you stop the extractor.

Before staring to work with the extractor, make sure that the motor, on the bottom of the extractor, is
connected as shown on the picture:
Also make sutr that the micro switch is connected with the automatic, as shown on the picture:
NOTE: Avoid working on the agregate. Before changing the spinning direction of the extractor, make sure the
extractor has come to a complete stop!