FalconEye Electronics Pinnacle User manual

2nd Gen Pinnacle Quick Start Guide
No. Part description
1 Type-C Power port
2 2nd camera port
3 GPS port
4 Reset button，MIC
5 Front camera lens
6 Micro SD card slot - Class 10 or higher
7 M button (menu, enter, file lock & unlock)
8 Menu up button (Long press to turn on/off Wi-Fi, short press to turn on/off Mic)
9 Menu down button
10 Power button(Long press to turn on/off dash cam, short press to confirm)
11 Main Camera _ Menu Display
12 Indicating light(Charging, recording)

FORMAT SD CARD BEFORE USE
1. Turn on Dash Cam – Long Press of Power Button
2. Confirm Record Mode is OFF
3. Short Press M Button to enter Menu.
4. Press Down Arrow Button 1x to enter System Settings Menu.
5. Next Either touch press the System Settings Icon or press Power(OK) button to select
6. Next press the down arrow 6x
7. Next Either touch press the Format Icon or press press the down arrow 4x followed by pressing Power(OK) button to select
8. Press Down button 1x and select Yes. Either touch check mark or press Power(OK) button to delete all data and FORMAT sd card
9. Once formatted, press M button 2x to get back to main camera view
10.Press Power(OK) button to start recording
Setup G-Sensor:
1. Turn on Dash Cam – Long Press of Power Button
2. Confirm Record Mode is OFF by short pressing Power(OK) Button
3. Short Press M Button to enter Menu.
4. Recording Setting is highlighted-Short Press Power(OK) Button
5. Short Press Down button 5 times to find G-Sensor icon followed by pressing Power(OK) Button or touch press G Sensor Icon
6. Short Press Down Button 1x to select level LOW.
7. Short Press Power Button to Confirm.
8. press M button 2x to get back to main camera view
9. Press Power(OK) button to start recording
RESET:
If system becomes inoperable during use, Dash Cam can be reset. Simply find Reset Button (Small hole in housing) and insert thin
needle to reset dash cam.
Button name Function definition
POWER Short press to power ON, long press to power OFF
OK/REC Confirm/REC by short press
MENU Menu setting
MODE Switch Mode by long press
SOS Lock current footage when recording
UP/DOWN Navigate menu options
WIFI Long press to ON/OFF WIFI
MUTE Short press to mute when recording
VISION SWITCH Short press to switchvthe display mode
RESET Reset
Setup Time and Date:
1. Turn on Dash Cam – Long Press of Power Button
2. Confirm Record Mode is OFF by short pressing Power(OK) Button
3. Short Press M Button to enter Menu.
4. Press Down Arrow Button 1x to enter System Settings Menu.
5. Short Press Down button 4 times to select Date/Time icon followed by pressing Power(OK) Button or touch press Date/Time icon
6. Short Press Power(OK) Button to change time and date
7. Short Press Power Button(OK) to navigate to next column and use up/down arrows to change #'s
8. press M button 3x to get back to main camera view and correct time and date will be displayed on top left of the screen
9. Press Power(OK) button to start recording