#FanciiAF @FanciiCo
Our LED lights closely simulate natural daylight, providing you
with true-to-life color-corrected reflection. Unlike traditional
incandescent bulbs, our long-lasting LEDs won’t burn out or
diminish and have a lifespan of up to 20,000 hours.
Vera has been designed with a built-in timer to automatically
shut off the LED lights after 30 minutes. So if you find yourself
in a rush, or forget to press the power button, you won’t have
to worry about your battery charge running down.
Perfect for creating a makeup look for an evening occasion like
a date night.
All-round ideal light for daytime makeup as it simulates natural
daylight.
True neutral white (no red or blue hues), use this setting to get
photo-ready.
Use the USB cord provided to charge the battery.
You will find the Micro USB Port located on the back of the
mirror. Attach the USB cable and connect the other end to
a reliable power source such as a computer, or USB DC-5V
adapter. The battery takes approx 3.5 hours to fully charge.
The charging light on the back of Vera will flash orange
when charging and green when it’s fully charged.
CHARGING
Ensure the battery is fully charged or use the USB cord and
plug Vera into a reliable power source (such as a computer
or USB adapter).
Push the power saving button on the back of the mirror.
Keep this product away from young children and pets.
The mirror is not waterproof. To protect against electrical
hazards, do not use it in the bath or shower.
Do not place the mirror in direct sunlight. Reflection of
direct sunlight by the mirror could cause a fire.
Use this mirror only for its intended purpose.
This product contains glass and may shatter if dropped.
Handle with care.
This product contains a lithium battery and should be
recycled or disposed of according to state and local guidelines.
Turn the LED lights on by tapping the main power button
on the front of the mirror.
Vera comes with three different LED light options. To cycle
through the different light settings tap the light settings
button on the front of the mirror until you find your desired
light temperature. Vera will remember the last setting you
used when you power it back on.
To brighten or dim the light, hold your finger down on the
main power button until you reach your desired brightness.
Push the power saving button on the back of the mirror
when not in use to conserve power.
Fully Charged
