F&U MPF3468H User manual

MPF3468H

1
CONTENT
IMPORTANT SAFETY INSTRUCTIONS....................................................................................2
FRONTAND REAR PANEL..........................................................................................................4
Front Panel/Rear Panel........................................................................................................4
REMOTE CONTROL.....................................................................................................................5
Installing the Batteries...................................................................................................................6
Using the Remote Control.............................................................................................................6
Connections....................................................................................................................................7
First time installation......................................................................................................................8
Basic Operation..............................................................................................................................8
Program Manage Settings............................................................................................................8
Program Edit...........................................................................................................................9
EPG (Electronic program guide)/Sort/LCN ...................................................................10
Picture Setting...............................................................................................................................11
Aspect Ratio/Resolution/TV format/Video output.........................................................11
Channel Search............................................................................................................................12
Auto Search/Manual Search..............................................................................................12
Country/Antenna power......................................................................................................13
Time Setting..................................................................................................................................13
Time offset/Country Region/Time Zone/Timer for Power On/Off................................13
Option.............................................................................................................................................14
OSD Language/Subtitle Language/Audio Language....................................................14
Digital Audio ..........................................................................................................................15
System Setting..............................................................................................................................15
Parental Guidance/Set Password/Restore Factory Default.........................................15
Information/Software upgrade...........................................................................................15
USB................................................................................................................................................16
Multimedia/Photo configure ...............................................................................................16
Movie Configure/USB PVR Configure..............................................................................17
Timeshift.................................................................................................................................18
Recording..............................................................................................................................19
TROUBLESHOOTING................................................................................................................20
TECHNICAL SPECIFICATION...................................................................................................21

2
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions. Keep these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water
6. Clean only with dry cloth.
7. Do not block any ventilation openings, install in accordance with the instructions.
8. Do not install near any heat sources stoves, or other apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety purpose of the polarized plug. If the Provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protected the power cord from being walked on or pinched particularly at plugs.
Convenience receptacles and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lighting storms o r when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in anyway. Such as power- supply cord or plug is
damaged I liquid have been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
14. Mains plug is used as the disconnect device, the disconnect device shall remain
readily operable.
15. The ventilation should not be impeded by cove ring the ventilation openings with items:
such as newspapers, table-cloth, curtains, etc
16. No naked flame sources, such as lighted candles, should be placed on the apparatus.
17. Attention should be drawn to the environmental aspects of battery disposal.
18. The use of apparatus in moderate climate.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture.
WARNING: The batteries shall not be exposed to excessive heat such as sunshine, fire or the
like.
Warning：
•The apparatus shall not be exposed to dripping or splashing and that no objects filled
with liquids. Such as vases. Shall be placed on the apparatus.
•The MAINS plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable.
•The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

3
The symbol indicates that dangerous voltages constituting a risk of electric shock are
present within this unit.
The symbol instructions indicate that there are important operating and maintenance
the literature accompanying this unit.
This symbol indicates that this product incorporates double insulation between
hazardous mains voltage and user accessible parts. When servicing use only
identical replacement parts.
CAUTION:
When the apparatus was in electrostatic circumstance, it may be malfunction and
need to reset by user.
Package Contents
Before installation. Please check the contents of the package.
The package should contain the following items:
DVBT TV Receiver X1 pc
Remote Control X1 pc
AAA Battery For Remote control X1 pair
User Manual X1 pc

4
FRONT AND REAR PANEL
Front Pa
nel
1. IR: Receive the signal from the remote control
2. USB: Data input from USB storage devices
Rear Panel
1. ANT IN: The aerial input connector
2. LOOP OUT: To TV Loop Out connector
3. COAXIAL: Connect to Amplifier Coaxial input terminal
4. HDMI: Connect to TV set HDMI input terminal
5. SCART: Connect to TV set Video input terminal
6. DC IN: 5V 2A

5
REMOTE CONTROL
STANDBY: Switch the product to on or standby Mode
MUTE: Mute or Restore Audio Output
EPG: (Electronic Program Guide) Call up the
EPG
INFO: Show information of the current program
TTX: Display Teletext contents
9 PIC: Select to 9 picture Mode
REC: Record TV program (Personal video
record)
SUB-T: Select Subtitles Language
MENU: Press this button to run menu on screen
and call command box
EXIT: Exit the current Menu or returns to the
previous menu
UP/DOWN: Navigate through the Menus.
CH-/CH+: Select the next or previous Channel
OK: Select the highlighted item
RIGHT/LEFT：Navigate through the Menus
VOL-/VOL+: Increase or decrease sound volume
FAVOURITE：Display or edit the favourite program list
TV/RADIO: Switch between TV and Radio mode
0-9(Numeric Buttons): Select a channel or setting
RECALL: Return to the last selected channel
USB: Shortcut to USB Menu
REV: Search backward during media play
FWD: Search forward during media play.
PREV: Skip to previous stage when play media file
NEXT: Skip to next stage when play media file
PLAY/PAUSE: starts or resume media play
STOP: Stop media play
REPEAT: Turn on/off repeat mode
Color buttons：Operate different functions in screen TEXT

6
Installing the Batteries
Remove the battery cover from the Remote Control and put 2pcs size batteries 1.5 V AAA
inside the compartment.
The diagram inside the Battery Compartment shows the correct way to install the batteries.
Using the Remote Control
To use the Remote Control, point it towards the front of the Digital Set Top Box
The Remote Control has a range of up to 7 meters from the Set Top Box at an angle of up to
60 degrees.
The Remote Control will not operate if its path is blocked.
Sunlight or very bright light will decrease the sensitivity of the Remote Control

7
Connections
For a basic connection from your SET TOP BOX to your TV set, you can use SCART
connection, For a higher quality connection; use a direct HDMI connection as shown below.
Connect to an audio amplifier use coaxial is an optional.

8
First time installation
After all connections have been made properly, switch on TV and make sure the receiver is
connected to the Main Power. Press Power button to switch on restoring receiver.
if you are using the receiver for the first time or have restored the unit to Factory Default, the
Installation Guide will appear on your TV screen.
1. [OSD Language] :press the RIGHT/LEFT button to select a language
2. [Country] press the RIGHT/LEFT button to select your country of residence
3. [Channel Search] press the RIGHT/LEFT or OK button to begin Automatic channel
search.
4. Once channel tuning is complete, you can start watching TV programs.
Basic Operation
Program Manage Settings
To access the Menu, Press the MENU button and select [Program]. Using the RIGHT/LEFT
keys to navigate through the menu.The Menu provides options to adjust the Program Manage
Settings. Press the EXIT button to exit the Menu

9
Program Edit
To edit your program preferences (lock, skip, favourite, move or delete) you will need to enter
the Program Edit Menu.
Set Favourite Program
You can create a shortlist of favourite program that you can easily access.
Set Favourite TV or Radio program:
1. Select the your desire program then press the FAVOURITE button,
2. A heart-shaped symbol will appear and the program is marked as a favourite
3. Repeat the previous steps to select more Favourite programs
4. To confirm and exit the Menu, press the EXIT button
Disable Favourite TV or Radio Channel:
Select the Favourite channel and press Favourite button on the remote control to cannel.
View Favourite Program
1. Press the Favourite button and the Favourite Menu will appear.
2. Press the UP/DOWN button to highlight the program that you want to mark as
favourite
3. Press the OK button to select your favourite program
Delete a TV or Radio Program
1. Select the program and then press the BLUE button
A warning message will appear. Press OK to delete the channel.
2. Repeat the previous steps to select more programs to delete.
Skip TV or Radio Program
1. Select the program you would like to skip and press the GREEN button.
A skip symbol will appear. The channel is marked as a skip.
2. Repeat the previous step to skip more channels.
3. To save your settings and exit the menu, press EXIT key.
Disable the skip channel function::
Select the Skip channel and press the GREEN button on the remote control to cancel
Move a TV or Radio Program
1. Select the preferred channel then press the RED button. A move symbol will appear