Farecla G-Plus User manual

WARNING
Read these instructions fully before operating this machine.
Keep these instructions for future reference.
This tool is intended for use as a polisher. As with all power tools,
failure to follow all of the instructions provided may result in electric shock, re and/or serious injury.
GENERAL SAFETY INSTRUCTIONS
Do not use this tool as a sander, grinder, cutter or for wire brushing. Using a power tool for anything other than its
intended purpose could result in serious injury.
Do not alter or modify this tool in any way. Failure to follow this instruction will invalidate any and all warranty as
well as presenting a signicant risk of injury.
Use personal protection equipment. Depending on the surfaces being polished and the products being used,
users and bystanders should wear the appropriate personal protection equipment, such as safety goggles or
glasses, face shields, dust masks, ear defenders, gloves, coveralls or aprons.
Only use Farécla accessories with this polishing machine. Please contact your local distribution agent for
details of all available applicator pads.
Never use damaged accessories. Before use, inspect all accessories and ensure that they are free from defects
WORKING ENVIRONMENT
• Only work in a clean and well-lit area
• Power tools create sparks. Do not use in explosive environments, such as in the presence of ammable
liquids, gases or dust
• Keep your working environment free from bystanders. Distractions can cause accidents
ELECTRICAL SAFETY
• Do not use in wet conditions. Water entering a power tool will increase the risk of electric shock
• If using the machine outside, use an extension cord suitable for outdoor use that has the appropriate rating
• Never use the cord for carrying, pulling, or unplugging the power tool. Keep the cord away from heat, oil,
sharp edges and moving parts
• Keep the power cord away from the path of the polisher
MANUAL
Operating voltage
Rated output
Frequency
No-load speed
Orbit diameter
Backing plate
Weight
Spindle thread
Insulation class
Sound power
Sound pressure
Vibration (main handle)
Vibration (aux handle)
220-240V
500W
50/60Hz
2000 - 4500opm
15mm
123mm
2.6kg
M8
II
92.9 dB(A)
81.9 dB(A)
4.5m/s
4.9m/s
TECHNICAL SPECIFICATIONS
DUAL ACTION
POLISHING MACHINE.
LIT2034 (V1 12-2019)
TOOLS &
EQUIPMENT
Farécla Products Ltd, Broadmeads, Ware, Hertfordshire, SG12 9HS, UK. | TEL: [phone] | E-Mail: [email protected] | www.farecla.com
SURFACE FINISHING
SPECIALISTS
fareclaproductsltd

PERSONAL SAFETY
• Do not overreach. Maintain proper footing and balance at all times
• Do not wear loose clothing or jewellery
• Do not use a power tool while tired or under the inuence of drugs, alcohol or medication
• Store power tools out of reach of children and do not allow persons unfamiliar with polishing
machines to use this tool
• Check the condition of this tool prior to use. If the tool is damaged, please contact a qualied repair person
INSTRUCTIONS FOR MACHINE OPERATION
INSTALLING ACCESSORIES
• Starting with an unplugged machine, align the backing plate to be central to the velour area of your
applicator pad and press the applicator onto the backing plate
• To remove your applicator, peel away from the backing plate
• To remove your backing plate, use an Allen key to remove the bolt and unscrew anti-clockwise
STARTING, STOPPING & CONTROLLING SPEED
• Your polisher features a speed dial control. The graph below illustrates the relationship between the
speed setting selected and the corresponding OPM (Oscillations Per Minute) of the polisher
• Please make sure to polish at the recommended
OPM of any given Farécla compound
• Use the dial to select the desired speed
• To start the tool, squeeze the trigger
• To stop the tool, release the trigger
• For continuous operation, use the switch lock
button to lock the trigger. Squeeze the trigger
again to stop the tool
MAINTENANCE
Keep your polishing machine in good repair by adopting a regular maintenance programme. Before use,
examine the general condition of the tool. Inspect switches and the cord for any damage. Ensure vents are clear
of dust and debris. Check for any loose screws, misalignment, improper mounting, fused moving parts, broken
parts or any other condition that could aect its safe operation. If abnormal noise or vibration occurs, turn the tool
o immediately and seek assistance. Never use a damaged tool.
Farécla recommends your machine should be serviced every 12 months by a qualied professional who should
carry out the following service points:
• Lubrication
• Brush inspection and replacement (a spare set is included with your polisher)
• Mechanical inspection and cleaning (gears, spindles, bearings, housings)
• Electrical inspection (switches, cord, armature)
• Electrical testing in line with local legislation and practices
DISPOSAL
At the end of its useful life, and in accordance with Directive 2012/19/EU on waste electrical and electronic
equipment (WEEE), this product must not be disposed of as domestic waste, but must be disposed of through
authorised recycling centres. Please contact your relevant local authorities for more details.
LIT2034 (V1 12-2019)
Farécla Products Ltd, Broadmeads, Ware, Hertfordshire, SG12 9HS, UK. | TEL: [phone] | E-Mail: [email protected] | www.farecla.com
SURFACE FINISHING
SPECIALISTS
fareclaproductsltd