Farmnavigator Iso Kit User manual

QUICK GUIDE
MMG7IAMAE010
ÑMMG7IAMAE010DÓ
4. Simplified EU declaration of conformity
This device complies with Directive 2014/30/EU and Directive 2014/35/EU.
The full text of the EU declaration of conformity is available at the following internet address:
eudeclaration.avmap.it
5. Safety Information
AvMap disclaims any liability deriving from an improper use or installation of the product in a way
that may violate the regulations and safety. It is highly recommended that the installation of the
product will be performed by a qualied maintenance technician. Consult the Installation manual for
a correct installation procedure.
www.farmnavigator.com
AvMap Srl
Viale Zaccagna, 6
54033 Carrara (MS), Italy
www.avmap.it
[email protected]

1. Product description
The FARMNAVIGATOR Iso Kit adds ISOBUS features to your G7 system.
1.1 Content of the package
• Powered bracket with:
- 3 x serial ports (2 x DB9 powered 12 V DC, 1 x DB9)
- 1 x power supply connector
- 1 x 14 pin connector (USB, Video IN, Ethernet compatible)
- 1 x 4 pin connector (CAN - ISOBUS compatible)
• In-cab connection cable
P5 PIN-OUT
PIN n° Function
2GPS TX
3 GPS RX
4GPS VCC
5 GPS GND
2. Connections scheme
P2
P4 PIN-OUT
PIN n° Function
2DEVICE 2 TX
3DEVICE 2 RX
5DEVICE 2 GND
P3 PIN-OUT
PIN n° Function
2DEVICE 1 TX
3DEVICE 1 RX
4DEVICE 1 VCC
5DEVICE 1 GND
9EXTERNAL
ALARM
P5
P4
P3
PWR +
PWR -
2A Fuse
61
95
61
95
61
95
Images are for illustrative purpose only and can di󰀨er from the real product.
GPS
Controller
Generic device
Power
supply
3. Bracket assembly
12
34
1
2
2.1 In-cab cable connection
ATTENTION: The In-cab cable is not waterproof. Do not use outside the tractor cab.
IN-CAB
1
1
2
3.2 To uninstall
3.1 To install