feather&black Noah Changing Table User manual

Noah Changing Table
IMPORTANT READ CAREFULLY – RETAIN FOR FUTURE REFERENCE
•Please take a few quite minutes to read these instructions
•Lay out the parts on a clean, flat surface and compare with the parts checklist. Save all packaging until
assembly is complete to avoid accidentally discarding fittings
•All assembly fastenings should always be tightened properly and care should be taken that no fittings
are loose
•Before each usage or assembly, inspect changing table for damaged hardware, loose joints, missing
parts or sharp edges. Do not use changing table if any parts are missing or broken
•To properly protect wood, avoid direct sunlight and excessive temperatures
•To clean, slightly moisten cloth with water and wipe surfaces. A damp cloth holds dust and prevents
damage. Repeat with a dry, soft, lint-free cloth
•Do not use abrasives or cleaning products which may contain ammonia or solvents
TOOLS REQUIRED:
•Please use Philips Head Screwdriver (not included) and Allen key part G (included) to assemble the
Changing table.
WARNING: To prevent injury always keep child within arms reach. Never leave child
unattended.