Felder FAT 300 User manual

Manuale di installazione - Carrello di montaggio FAT 300 (Capacità portante max. 300 kg)
Instructions de montage - Table pour montage FAT 300 (Capacité de levage max. 300 kg)
420-241420240-901 / 1
HG
13.1.2016
Gez.
Artikel:Z.Nr:
Stand
www.felder-group.com
AUSTRIA, Tel: 05223 / 58 50-0 - Fax: DW 61
KR-FELDER-STR. 1, A-6060 HALL in Tirol
Assembly instruction - Mounting table FAT 300 (Load capacity max. 300 kg)
Aufbauanleitung - Montagewagen FAT 300 (Traglast max 300 kg)
420-240
2x
M 8x20 mm
1Torx TX 40
2x
M 8x20 mm
13 mm
ISK 5 mm
10 Nm
2x 2
Torx TX 40
3 x
M 8x20 mm
4 x
10 Nm
TX 40
4
SW 13 mm
M 8x12 mm
13 mm
3
2 x
TX 30

420-240
420240-901 / 2
HG
13.1.2016
Gez.
Artikel:Z.Nr:
Stand
www.felder-group.com
AUSTRIA, Tel: 05223 / 58 50-0 - Fax: DW 61
KR-FELDER-STR. 1, A-6060 HALL in Tirol
420-241
5B
SW 10 mm
2 x
M 6x10 mm
5.2
5.1
5A
5A
ca. 30 kg
4 x
5A
2 x
2 x
M8x20 mm
TX 40
2 x
6.2
6.3
6.1
6.2
6.1
M6x14 mm
SW 10 mm
4 x
TX 40
10 mm
66.3
7
2 x
M 6x16 mm
10 Nm
TX 30

420-241420-240-901 / 3
HG
13.1.2016
Gez.
Artikel:Z.Nr:
Stand
www.felder-group.com
AUSTRIA, Tel: 05223 / 58 50-0 - Fax: DW 61
KR-FELDER-STR. 1, A-6060 HALL in Tirol
420-240
8
ca. 75 kg
2 x
Max- Position
ca. 1020 mm
Min- Position
ca. 425 mm
X
Y
STOP
Max 300 kg
Max 300 kg
Art. Nr.:
1200 x 739 mm
420-244
420-243
X / Y
420240-902

Please Note: You can download the manual in your local language here:
www.felder-group.com
?? www . felder-group.com
User manual
Height adjustable FELDER working table
FAT 300
Keep this manual handy and in good condition for continual reference!
Translation
Dok.ID: 420240-903_02 • Englisch • 2015-07-14

2
!
Baujahr / year of construction / ANNEE DE CONSTR.:
PH: HZ: A:
A-6060 HALL in Tirol, KR-Felder-Straße 1,
Austria, Tel. [phone],
Fax [phone], [email protected] www.felder.at
KW:
V:
NR.:
TYPE :
XXX-XXX/XX-XX
FAT 300
2014
- - - - - - - - -- - -
- - - S1
ARBEITSTISCH / working table
Made in Austria
EIGENGEWICHT / net weight 75 KG
TRAGLAST / load capacity MAX: 300 KG
Height adjustable FELDER working table
FAT 300
© Felder KG
KR-FELDER-STR.1
A-6060 Hall in Tirol
Tel.: [phone] / 58 50 0
Fax: [phone] / 56 13 0
Email: [e-mail]
Internet: www.felder-group.com
FELDER A product of the FELDER GROUP!
For the safety of all personnel, it is necessary to study this manual thoroughly before assembly and operation.
This manual must be kept in good condition and should be considered as part of the machine. Furthermore,
the manual must be kept to hand and within the vicinity of the machine so that it is accessible to operators
when using, maintaining or repairing the machine.
Attention! Risk of material damage! The machine must be inspected immediately upon arrival. If the machine
has been damaged during transport, or if any parts are missing, a written record of the problems must be
submitted to the forwarding agent and a damage report compiled. Also be sure to notify your supplier imme-
diately.

3
Height adjustable FELDER working table
FAT 300
Content
Content
1 General .......................................................................................................... 4
1.1 Symbol legend ...............................................................................................................4
1.2 Information about the manual ..........................................................................................4
1.3 Copyright ......................................................................................................................4
1.4 Liability and warranty .....................................................................................................5
1.5 Warranty notice .............................................................................................................5
1.6 Spare parts ...................................................................................................................5
1.7 Disposal ........................................................................................................................5
2 Safety ............................................................................................................ 6
2.1 Intended use ..................................................................................................................6
2.2 Manual contents ............................................................................................................6
2.3 Making changes and modifications to the machine.............................................................6
2.4 Responsibilities of the operator .........................................................................................7
2.5 Personnel requirements ....................................................................................................7
2.6 Work safety ..................................................................................................................7
2.7 Personal protective equipment ..........................................................................................8
2.8 Machine hazards ...........................................................................................................8
3 Technical specifications .................................................................................... 9
3.1 Dimensions and weight ...................................................................................................9
4 Transport, packaging and storage ................................................................. 10
4.1 Safety instructions ........................................................................................................10
4.2 Transport inspection ......................................................................................................10
4.3 Packaging ...................................................................................................................10
4.4 Storage .......................................................................................................................11
4.5 Transport .....................................................................................................................11
5 Setup and installation ................................................................................... 12
5.1 Safety instructions ........................................................................................................12
5.2 Floor space requirement ................................................................................................12
6 Operation .................................................................................................... 13
6.1 Authorised and prohibited work techniques .....................................................................13
6.2 Adjust the working height ..............................................................................................13
7 Service / Cleaning the machine ..................................................................... 14
8 Annex - Declaration of Conformity ................................................................ 15

4
!
Height adjustable FELDER working table
FAT 300
1 General
1.1 Symbol legend
Important technical safety instructions in this manual are
marked with symbols.
These instructions for work safety must be followed.
In all these particular cases, special attention must be
paid in order to avoid accidents, injury to persons or
material damage.
Attention! Risk of material damage!
This symbol marks instructions which, if not observed, may lead to material damage, functional failures and/
or machine breakdown!
Warning! Risk of injury or death!
This symbol marks instructions that must be followed in order to avoid harm to one‘s health, injuries, perma-
nent impairment or death!
General
1.2 Information about the manual
This manual describes how to operate the machine
properly and safely. Be sure to follow the safety tips and
instructions stated here as well as any local accident
prevention regulations and general safety regulations.
Before beginning any work on the machine, ensure that
the manual, in particular the chapter entitled “Safety”
and the respective safety guidelines, has been read in its
entirety and fully understood. This manual is an integral
part of the machine and must therefore be kept in the
direct vicinity of the machine and be accessible at all
times. If the machine is sold, rented, lent or otherwise
transferred to another party, the manual must accompany
the machine.
1.3 Copyright
This manual should be handled confidentially. It is
designated solely for those persons who work on or with
the machine. All descriptions, texts, drawings, photos
and other depictions are protected by copyright and
other commercial laws. Illegal use of the materials is
punishable by law.
This manual, in its entirety or parts thereof, may not
be transferred to third parties or copied in any way or
form, and its contents may not be used or otherwise
communicated without the express written consent of the
manufacturer.
Infringement of these rights may lead to a demand for
compensation or other applicable claims. We reserve all
rights in exercising commercial protection laws.
Note:
This symbol marks tips and information which should be observed to ensure efficient and failure-free operati-
on of the machine.

5
!
Height adjustable FELDER working table
FAT 300
1.4 Liability and warranty
The contents and instructions in this manual have been
compiled in consideration of current regulations and
state-of-the-art technology as well as based on our know-
how and experience acquired over many years. This
manual must be read carefully before commencing any
work on or with this machine. The manufacturer shall not
be liable for damage and/or faults resulting from the dis-
regard of instructions in the manual. The text and images
do not necessarily represent the delivery contents.
The images and graphics are not depicted on a 1:1
scale. The actual delivery contents are dependent on
custom-build specifications, add-on options or recent
technical modifications and may therefore deviate from
the descriptions, instructions and images contained in
the manual. Should any questions arise, please contact
the manufacturer. We reserve the right to make technical
modifications to the product in order to further improve
user-friendliness and develop its functionality.
1.5 Warranty notice
The guarantee period is in accordance with national
guidelines. Details may be found on our website,
www.felder-group.com
1.6 Spare parts
If unauthorised spare parts are fitted into the machine,
all warranty, service, compensation and liability claims
against the manufacturer and their contractors, dealers
and representatives shall be rejected.
Use only genuine spare parts supplied by the manufac-
turer.
1.7 Disposal
If the machine is to be disposed of, separate the compo-
nents into the various materials groups in order to allow
them to be reused or selectively disposed of. The whole
structure is made of steel and can therefore be dis-
mantled without problem.
This material is also easy to dispose of and does not pol-
lute the environment or jeopardise public health. Interna-
tional environmental regulations and local disposal laws
must always be complied with.
General
Attention! Risk of material damage!
Non genuine, counterfeit or faulty spare parts may result in damage, cause malfunction or complete break-
down of the machine.
Note: The original spare parts that have been authorised for use are listed in a separate spare parts catalo-
gue, enclosed in the documentation package supplied with the machine.
Attention! Used electrical materials, electronic components, lubricants and other auxiliary substances must be
treated as hazardous waste and may only be disposed of by specialised, licensed firms.

6
Height adjustable FELDER working table
FAT 300
The machine described in this manual is intended solely
for:
Machinery equipment vehicle, storage assistance, sta-
cking cart or additional workspace
Operational safety is guaranteed only when the machine
is used for the intended purposes.
The term “proper use” also refers to correctly observing
the operating conditions as well as the specifications and
instructions in this manual.
The machine may only be operated with parts and
original accessories from the manufacturer.
2 Safety
At the time of its development and production, the
machine was built in accordance with prevailing
technological regulations and therefore conforms to
industry safety standards.
However, hazards may arise should the machine be
operated by untrained personnel, used improperly or em-
ployed for purposes other than those it was designed for.
The chapter entitled “Safety” offers an overview of all
the important safety considerations necessary to optimise
safety and ensure the safe and trouble-free operation of
the machine.
To further minimise risks, the other chapters of this
manual contain specific safety instructions, all marked
with symbols. Besides the various instructions, there are
a number of pictograms, signs and labels affixed to the
machine that must also be heeded. These must be kept
visible and must not be removed.
2.1 Intended use
2.2 Manual contents
All those appointed to work on or with the machine must
have fully read and understood the manual before
commencing any work. This requirement must be met
even if the appointed person is familiar with the
operation of such a machine or a similar one, or has
been trained by the manufacturer.
Knowledge about the contents of this manual is a prere-
quisite for protecting personnel from hazards and avoi-
ding mistakes so that the machine may be operated in
a safe and trouble- free manner. It is recommended that
the operator requests proof from the personnel that the
contents of the manual have been read and understood.
2.3 Making changes and modifications to the machine
In order to minimise risks and to ensure optimal perfor-
mance, it is strictly prohibited to alter, retrofit or modify
the machine in any way without the express consent of
the manufacturer.
All the pictograms, signs and labels affixed to the
machine must be kept visible, readable and may not be
removed. Pictograms, signs and labels that have become
damaged or unreadable must be replaced promptly.
Safety
Attention! Any use outside of the machine‘s intended purpose shall be considered improper and is therefore
not permitted. All claims regarding damage resulting from improper use that are made against the manufac-
turer and its authorised representatives shall be rejected. The operator shall be solely liable for any damage
that results from improper use of the machine.

7
Height adjustable FELDER working table
FAT 300
2.4 Responsibilities of the operator
This manual must be kept in the immediate vicinity of
the machine and be accessible at all times to all persons
working on or with the machine. The machine may only
be operated if it is in proper working order and in safe
condition. The general condition of the machine must be
controlled and the machine must be inspected for visible
defects every time before it is switched on. All instruc-
tions in this manual must be strictly followed without
reservation.
Besides the safety advice and instructions stated in this
manual, it is necessary to consider and observe local
accident prevention regulations, general safety regula-
tions as well as current environmental stipulations that
apply to the operational range of the machine.
The operator and designated personnel are responsible
for the trouble-free operation of the machine as well as
for clearly establishing who is in charge of installing,
servicing, maintaining and cleaning the machine.
Machines, tools and accessories must be kept out of the
reach of children.
2.5 Personnel requirements
Only authorised and trained personnel may work on and
with the machine. Personnel must be briefed about all
functions and potential dangers of the machine. “Spe-
cialist staff“ is a term that refers to those who – due to
their professional training, know-how, experience, and
knowledge of relevant regulations – are in a position to
assess delegated tasks and recognise potential risks. If
the personnel lack the necessary knowledge for wor-
king on or with the machine, they must first be trained.
Responsibility for working with the machine (installation,
service, maintenance, overhaul) must be clearly defined
and strictly observed. Only those persons who can be
expected to carry out their work reliably may be given
permission to work on or with the machine. Personnel
must refrain from working in ways that could harm
others, the environment or the machine itself. It is absolu-
tely forbidden for anyone who is under the influence of
drugs, alcohol or reaction-impairing medication to work
on or with the machine. When appointing personnel to
work on the machine, it is necessary to observe all local
regulations regarding age and professional status. The
user is also responsible for ensuring that unauthorised
persons remain at a safe distance from the machine.
Personnel are obliged to immediately report any irregu-
larities with the machine that might compromise safety to
the operator.
2.6 Work safety
Following the safety advice and instructions given in this
manual can prevent bodily injury and material
damage while working on and with the machine. Failure
to observe these instructions can lead to bodily injury
and damage to or destruction of the machine. Disregard
of the safety advice and instructions given in this manual
as well as the accident prevention regulations and gene-
ral safety regulations applicable to the operative range
of the machine shall release the manufacturer and their
authorised representatives from any liability and from all
compensation claims.
Safety

8
Height adjustable FELDER working table
FAT 300
Warning! Other risks / Risk of injury!
• Risk of injury through being crushed, caught.
• Risk of injury due to insufficient preparation!
• Do not work if the floors are still wet or are slippery.
• It is strictly forbidden to climb onto the machine - danger of falling.
• Consider the machine‘s centre of gravity when transporting it (minimise the risk of it tipping over).
2.7 Personal protective equipment
When working on or with the machine, the following
must be strictly observed:
Protective clothes
Sturdy, tight-fitting clothing (tear-resistant, no wide sleeves, no jewellery (rings, bracelets, necklaces, etc.)).
Persons with long hair who are not wearing a hairnet are not permitted to work on or with the machine!
When working on or with the machine, the following must always be worn by personnel:
Protective footwear
To protect the feet from heavy falling objects and prevent sliding on slippery floors
2.8 Machine hazards
The machine has undergone a hazard analysis. The
design and construction of the machine are based on the
results of this analysis and correspond to state-of-the-art
technology.
The machine is considered operationally safe when used
properly.
Nevertheless, there are some remaining risks that must be
considered.
Safety

9
EE 1
B
A
G
F
C
D
H
H
Height adjustable FELDER working table
FAT 300
Machine FAT 300
Base dimensions A x B (max.) 1290 x 780 mm
Worktop surface C x D 1200 x 739 mm
Total height E (Position: upper) approx. 1020 mm
Total height E1 (Position: down) approx. 425 mm
total length Fmax. 1240 mm
Overall width G739 mm
Load capacity H (max.) 300 kg
Net weight *) approx. 75 kg
Operating/room temperature +10° to +40°C
Machine including packaging FAT 300
Length x width x Height 1200 x 800 x 400 mm
Transport width min. 640 mm
Weight (approx.)**) 98 kg
Storage temperature –10° to +50 °C
*) with worktop surface
**) without worktop surface
3 Technical specifications
Fig. 3-1: Dimensions FAT 300
3.1 Dimensions and weight
Technical specifications

10
!
Height adjustable FELDER working table
FAT 300
For this reason the following safety instructions must be observed:
• Never lift loads over a person.
• Always move the machine with the utmost care and
caution.
• Only use suitable lifting accessories and hoisting
devices that have a sufficient load-carrying capacity.
• The machine should never be lifted by its protruding
parts (e.g. working table).
• Consider the machine‘s centre of gravity when trans-
porting it (minimise the risk of it tipping over).
• Take measures to prevent the machine from slipping
sideways.
• Ropes, belts or other hoisting devices must be
equipped with safety hooks.
• Do not use torn or worn ropes.
• Do not use knotted ropes or belts.
• Ensure that ropes and belts do not lie against sharp
edges.
• Transport the machine as carefully as possible in order
to prevent damage.
• Avoid subjecting the machine to shocks.
When transporting the machine overseas, ensure that
the packaging is airtight and that a desiccant is
added to protect the metal parts against corrosion.
4 Transport, packaging and storage
4.1 Safety instructions
4.2 Transport inspection
Upon arrival, inspect the shipment to ensure that it is
complete and has not suffered any damage.
If any transport damage is visible, do not accept the deli-
very or only accept it with reservation. Record the scope
of the damage on the transport documents/delivery note.
Initiate the complaint process.
For all defects that are not discovered upon delivery, be
sure to report them as soon as they are recognised as
damage claims must be filed within a certain period, as
granted by law.
4.3 Packaging
If no agreement has been made with the supplier to take back the packaging materials, help to protect the environ-
ment by reusing the materials or separating them according to type and size for recycling.
Note: Help preserve the environment!
Packaging materials are valuable raw materials and in many cases they can be used again or expediently
reprocessed or recycled.
Attention! Dispose of the packaging materials in an environmentally friendly way and always in accordance
with local waste disposal regulations. If applicable, contract a recycling firm to dispose of the packaging mate-
rials.
Warning! Risk of injury!
There is a risk of injury as a result of falling parts while transporting, loading or unloading the machine.
Attention! Risk of material damage!
The machine can be damaged or destroyed if it is subjected to improper handling during transport.
Transport, packaging and storage

11
ca. 75 kg
2 x
!
!
!
!
Height adjustable FELDER working table
FAT 300
The machine is partly assembled when delivered on the
pallet
The machine is shipped mounted on a pallet. (4 x Secu-
ring bolt)
The machine can be transported/unloaded with a fork
carriage or a forklift truck or with a crane and hoisting
loop.
!Securing bolt
Note:
The transportation width is well under 1000 mm. This makes it possible to transport the machine through
doorways.
To facilitate assembly, ensure the presence of a minimum of one additional people.
Individual installation instructions are found with the machine or the worktop surface.
Attention! Risk of material damage!
Transport the machine according to the enclosed transport and assembly instructions!
Fig. 4-1: Transport locking device
4.5 Transport
4.4 Storage
Keep items sealed in their packaging until they are
assembled/installed and be sure to observe the stacking and storage symbols on the outside of the packaging.
Store packed items only under the following conditions
• Do not store outdoors.
• Store in a dry and dust-free environment.
• Do not expose to aggressive substances.
• Protect from direct sunlight.
• Avoid subjecting the machine to shocks.
• Storage temperature: -10° to +50° C.
• Maximum humidity: 60 %.
• Avoid extreme temperature fluctuations (condensation
build-up).
• Apply a coat of oil to all bare machine parts (corrosi-
on protection).
• When storing for longer than 3 months, apply a coat
of oil to all bare machine parts (corrosion protection).
Regularly check the general condition of all parts and
the packaging. If necessary, refresh or re-apply the
coat of
anti-corrosive agent.
• If the machine is to be stored in a damp environment,
it must be sealed in air-tight packaging and protected
against corrosion (desiccant).
Transport, packaging and storage

12
Height adjustable FELDER working table
FAT 300
Note:
Individual installation instructions are found with the machine or the worktop surface.
5 Setup and installation
5.1 Safety instructions
• Before assembling and installing the machine, check to make sure it is complete and in good condition.
• Keep the work area orderly and clean. Components and tools that are not put in their correct place or put away
may be the cause of accidents!
• Ensure that there is sufficient space to work around the machine.
5.2 Floor space requirement
Fig. 5-1: Space requirements/Measurements
Installation site requirements:
• Operation/room temperature: +10° to +40° C
• Ensure that the work surface is sufficiently stable and
has the proper load-bearing capacity
• Provide sufficient light at the workstation
• Ensure there is sufficient clearance for or from
neighbouring workstations
To operate and maintain the machine, leave a min. of
500 mm space all around the machine.
Warning! Risk of injury! An incomplete, faulty or damaged machine can lead to serious physical injury or
equipment damage. Only assemble and install the machine if the machine and its parts are complete and
intact.
Warning! Risk of injury! Improper assembly and installation can lead to serious physical injury or equipment
damage. For this reason, this work may only be carried out by authorised, trained personnel who are familiar
with how to operate the machine and in strict observance of all safety instructions.
Setup and installation

13
STOP
!
"
#
$
%
#
!
!
Height adjustable FELDER working table
FAT 300
6 Operation
!Work bench
"4 solid rubber rollers with locks
#Foot pedal
Attention! Risk of material damage!
When setting the working height (particularly when lowering), be sure that no workpieces or other objects
have been placed beneath the table (wedging threat).
Attention! Risk of material damage! Danger of tipping
Only process work pieces that can be securely positioned
Load capacity (max.) 300 kg
6.2 Adjust the working height
The working height can be adjusted continuously bet-
ween 400 and 1020 mm.
1. Wheel lock: press in and lock
3. Adjust the working height:
Operate the lever on the machine frame.
(Push to the bottom)
$place to the top
4. Lower the work bench:
Operate the lever on the machine frame.
• Push slowly to the top (up to stop)
• press and hold
%Lower the work bench
Note: Avoid jerky movements.
Operate the lever on the machine frame --> up to stop !
6.1 Authorised and prohibited work techniques
The following working techniques are prohibited on this machine:
• It is strictly forbidden to climb onto the machine - danger of falling.
Authorised working techniques
• Can be used as: Machinery equipment vehicle, storage assistance, stacking cart or additional workspace
Operation

14
!
Height adjustable FELDER working table
FAT 300
We recommend that dust and chips are cleaned off the
machine if required, especially from the table surfaces.
Using the “glue Solvent & press cleaner”, it is easy to re-
move all glue residues from tools and machine parts
Never use caustic or abrasive detergents.
Cleaning and care products are available as accessories
(Felder catalogue).
7 Service / Cleaning the machine
Note:
Generally there is no lubrication necessary, because the ball bearings are free of maintenance.
The guiding systems are completely maintenance free and do not require the addition of lubricants.
Attention! Risk of material damage!
The lift cylinder is free of maintenance and must not be taken apart by the user.
Fig. 7-1: Remove dust and shavings
Service

15
Hall in Tirol, 1.6.2014
Height adjustable FELDER working table
FAT 300
Manufacturer: Felder KG
KR-FELDER-STR.1
A-6060 Hall in Tirol
Product designation:
Make: FELDER
Model designation: FAT 300
The following EC guidelines were applied: 2006/42/EG
Height adjustable FELDER working table
8 Annex - Declaration of Conformity
Annex
EG-Declaration of Conformity
According to Machine Guidelines 2006/42/EG
We hereby declare that the machine indicated below, which corresponds to the design and construction of the model
we placed on the market, conforms with the health and safety requirements as stated by the EC.
This EC Declaration of Conformity is valid only if the CE label has been affixed to the machine.
Modifying or altering the machine without the express written agreement of the manufacturer shall render the
warranty null and void.
The signatory of this statement is the appointed agent for
the compilation of the technical information.
Johann Felder, Managing Director FELDER KG
KR-FELDER-STR.1 • A-6060 Hall in Tirol

© Felder KG
KR-FELDER-STR.1
A-6060 Hall in Tirol
Tel.: [phone] / 58 50 0
Fax: [phone] / 56 13 0
Email: [e-mail]
Internet: www.felder-group.com